Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. L. Zhang, K. Bishofberger, V. Shiltsev, and F. Zimmermann, “The Special Applications of Tevatron Electron Lens in Collider Operation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB076, pp. 1778-1780.
[n] J. R. Rees, “The PEP Storage Ring-Current Status”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 1989-1994.
[n] J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME043, pp. 568-570.
[n] W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
[n] R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
[n] J. M. Potter, “A Real-Time Sampling Beam Position Monitor”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper C-7, pp. 175-189.
[n] D. J. Clark and C. M. Lyneis, “Operation of the LBL ECR Source Injection System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-09, pp. 499-502.
[n] P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
[n] P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
[n] O. B. Dzagurov and V. P. Petukhov, “The Flat Corona Triode and Intermediate Shields in Electrostatic Generators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP26C, pp. 688-689.
[n] K. A. Brown et al., “Python and MATLAB Interfaces to RHIC Controls Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 765-769. doi:10.18429/JACoW-ICALEPCS2017-TUPHA153
[n] S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
[n] M. Chung et al., “Instrumentation for Characterizing 201-MHz MICE Cavity at Fermilab”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3930-3932. doi:10.18429/JACoW-IPAC2014-THPRI071
[n] L. Bobb and G. Rehm, “Performance of a Reflective Microscope Objective in an X-ray Pinhole Camera”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 477-481. doi:10.18429/JACoW-IBIC2018-WEPB18
[n] T. M. Huang et al., “The development of a high power input coupler for China ADS injector I RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO041, pp. 3857-3859.
[n] M. Arnold, T. Kuerzeder, J. Pforr, N. Pietralla, M. Steinhorst, and F. Hug, “Construction of a Third Recirculation for the S-DALINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 168-170. doi:10.18429/JACoW-LINAC2016-MOPLR014
[n] P. McIntosh, A. Hill, and H. Schwarz, “An Automated 476 MHz RF Cavity Processing Facility at SLAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB035, pp. 1273-1275.
[n] U. Bechstedt et al., “The Performance of COSY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP11F, pp. 541-543.
[n] A. J. Jason, E. F. Higgins, and A. R. Koelle, “The Los Alamos Proton Storage Ring (PSR) Injection Deflector System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2941-2944.
[n] W. Kang and Y. Hao, “A New Slotted-Pipe Kicker Magnet for BEPCII Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT005, pp. 955-957.
[n] S. Wilde et al., “Development of Thin Films for Superconducting RF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2406-2408. doi:10.18429/JACoW-IPAC2014-WEPME058
[n] A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Surface Roughness and Correlated Enhanced Field Emission Investigations of Electropolished Niobium Samples”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO045, pp. 316-320.
[n] S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 329-331. doi:10.18429/JACoW-SRF2019-MOP101
[n] S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
[n] C. Kerns, J. Crisp, Q. Kerns, and H. Miller, “New Low-Level RF System for the Fermilab Booster Synchrotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 619-622.
[n] B. G. Chidley, J. C. Brown, S. B. Hodge, J. H. Ormrod, and J. Ungrin, “The Chalk River High Current Test Facility”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper I02, pp. 218-225.
[n] H. Joehri et al., “Development of the new UE38 Undulator for the Athos Beamline in SwissFEL”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. XX-XX. doi:10.18429/JACoW-MEDSI2018-TUOPMA03
[n] H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3587-3590. doi:10.18429/JACoW-IPAC2024-THPR39
[n] R. Toelle et al., “COSY-SCL, the Superconducting Injector Linac for COSY”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA009, pp. 598-600.
[n] J. DeLong, J. M. Brennan, T. Hayes, N. Le, and K. S. Smith, “A Bunch to Bucket Phase Detector Using Digital Receiver Technology”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB025, pp. 3341-3343.
[n] J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527.
[n] K. D. Jacobs et al., “Instability Calculations for the MIT-Bates South Hall Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1791-1794.
[n] A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 315-317. doi:10.18429/JACoW-ICALEPCS2017-TUMPL06
[n] L. Shen et al., “Pre-chirp Control Broadband Non-collinear Optical Parametric Amplifier for the Future Laser Weak-field Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA038, pp. 1223-1225.
[n] A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2886-2889. doi:10.18429/JACoW-IPAC2018-THXGBD4
[n] M. Schalwat, K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and N. Steinhau-Kuehl, “Update of the DESY Infrastructure for Cavity Preparation”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO018, pp. 401-404.
[n] W. Schappert, J. P. Holzbauer, and Y. M. Pischalnikov, “Progress at FNAL in the Field of the Active Resonance Control for Narrow Bandwidth SRF Cavities.”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3355-3357. doi:10.18429/JACoW-IPAC2015-WEPTY036
[n] J. Dwivedi et al., “Restoration of RF Cavity for Synchrotron Storage Ring INDUS-1”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16003B, pp. XX-XX.
[n] G. Papotti, A. A. Gorzawski, M. Hostettler, and R. Schmidt, “Beam Losses Through the LHC Operational Cycle in 2012”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI028, pp. 1400-1402.
[n] J. Bradley III, T. Hardek, M. T. Lynch, D. E. Rees, W. Roybal, and P. J. Tallerico, “Spallation Neutron Source High-Power RF Transmitter Design for High Availability, Ease of Installation and Cost Containment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG015, pp. 1458-1460.
[n] J. Buon, “Final Focus Test Beam for the Next Linear Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 125-128.
[n] A. V. Tollestrup et al., “Measurements of the Longitudinal and Transverse Beam Loss at the Tevatron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB040, pp. 2497-2499.
[n] C. G. Beetham, R. J. Lauckner, and C. Saltmarsh, “Overview of the SPS/LEP Fast Broadcast Message Timing System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 766-769.
[n] T.-S. F. Wang, “Robinson Instability and Logitudinal Mode Coupling”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1160-1163.
[n] J. D. Jarvis et al., “Adsorbate Modification of Emission from Diamond Field Emitters and Carbon Nanotubes”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC59, pp. 372-375.
[n] C. S. Chien, “Orbits and Nonlinear Effects in Terms of the Field Coefficients in the Median Plane”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 192-194.
[n] Y. Li, J. Pflueger, E. Gluskin, and N. Vinokurov, “Fine Tuning of the K-parameter of Two Segments of the European XFEL Undulator Systems”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC28, pp. 144-147.
[n] N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
[n] K. A. Brown, I. H. Chiang, A. Pendzick, and T. Tallerico, “Observations of Secondary Emission Chamber Degradation from Very High Intensity Proton Beams at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P047, pp. 2213-2214.
[n] P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
[n] C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
[n] B. Dwersteg et al., “Beam Test of a 9-Cell Superconducting Cavity in the PETRA Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3596-3599.
[n] X. L. Zhang et al., “Upgrades of the Tevatron Electron Lens”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB077, pp. 1781-1783.
[n] B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019.
[n] CA. King and R. Neswold, “Upgrading the Fermilab Fire and Security Reporting System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUCAUST01, pp. 563-566.
[n] R. Stassen et al., “Recent Results of the HESR RF System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2094-2096. doi:10.18429/JACoW-IPAC2014-WEPRO064
[n] W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
[n] V. N. Barkovsky, Ju. G. Basargin, R. N. Litunovsky, O. A. Minjaev, A. V. Popov, and A. V. Stepanov, “Ion Optical Studies of Extraction Transport and Analysis Systems for 240-cm Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-005, pp. XX-XX.
[n] C. Feng et al., “Measurement of the Local Energy Spread of Electron Beam at SDUV-FEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOBB01, pp. 2143-2145.
[n] J. D. Sedillo, J. D. Gilpatrick, J. D. Nguyen, and M. E. Gruchalla, “LANSCE 1L Harp Data Acquisition System Upgrade”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD11, pp. 438-441.
For LaTeX
Use Complete Form
For BibTeX
References
- X. L. Zhang, K. Bishofberger, V. Shiltsev, and F. Zimmermann, “The Special Applications of Tevatron Electron Lens in Collider Operation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB076, pp. 1778-1780.
- J. R. Rees, “The PEP Storage Ring-Current Status”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 1989-1994.
- J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME043, pp. 568-570.
- W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
- R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
- J. M. Potter, “A Real-Time Sampling Beam Position Monitor”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper C-7, pp. 175-189.
- D. J. Clark and C. M. Lyneis, “Operation of the LBL ECR Source Injection System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-09, pp. 499-502.
- P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
- P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
- O. B. Dzagurov and V. P. Petukhov, “The Flat Corona Triode and Intermediate Shields in Electrostatic Generators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP26C, pp. 688-689.
- K. A. Brown et al., “Python and MATLAB Interfaces to RHIC Controls Data”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 765-769.
- S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
- M. Chung et al., “Instrumentation for Characterizing 201-MHz MICE Cavity at Fermilab”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3930-3932.
- L. Bobb and G. Rehm, “Performance of a Reflective Microscope Objective in an X-ray Pinhole Camera”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 477-481.
- T. M. Huang et al., “The development of a high power input coupler for China ADS injector I RFQ”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO041, pp. 3857-3859.
- M. Arnold, T. Kuerzeder, J. Pforr, N. Pietralla, M. Steinhorst, and F. Hug, “Construction of a Third Recirculation for the S-DALINAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 168-170.
- P. McIntosh, A. Hill, and H. Schwarz, “An Automated 476 MHz RF Cavity Processing Facility at SLAC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB035, pp. 1273-1275.
- U. Bechstedt et al., “The Performance of COSY”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP11F, pp. 541-543.
- A. J. Jason, E. F. Higgins, and A. R. Koelle, “The Los Alamos Proton Storage Ring (PSR) Injection Deflector System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2941-2944.
- W. Kang and Y. Hao, “A New Slotted-Pipe Kicker Magnet for BEPCII Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT005, pp. 955-957.
- S. Wilde et al., “Development of Thin Films for Superconducting RF Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2406-2408.
- A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Surface Roughness and Correlated Enhanced Field Emission Investigations of Electropolished Niobium Samples”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO045, pp. 316-320.
- S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 329-331.
- S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
- C. Kerns, J. Crisp, Q. Kerns, and H. Miller, “New Low-Level RF System for the Fermilab Booster Synchrotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 619-622.
- B. G. Chidley, J. C. Brown, S. B. Hodge, J. H. Ormrod, and J. Ungrin, “The Chalk River High Current Test Facility”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper I02, pp. 218-225.
- H. Joehri et al., “Development of the new UE38 Undulator for the Athos Beamline in SwissFEL”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. XX-XX.
- H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR39, pp. 3587-3590.
- R. Toelle et al., “COSY-SCL, the Superconducting Injector Linac for COSY”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPA009, pp. 598-600.
- J. DeLong, J. M. Brennan, T. Hayes, N. Le, and K. S. Smith, “A Bunch to Bucket Phase Detector Using Digital Receiver Technology”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB025, pp. 3341-3343.
- J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527.
- K. D. Jacobs et al., “Instability Calculations for the MIT-Bates South Hall Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1791-1794.
- A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 315-317.
- L. Shen et al., “Pre-chirp Control Broadband Non-collinear Optical Parametric Amplifier for the Future Laser Weak-field Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA038, pp. 1223-1225.
- A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2886-2889.
- M. Schalwat, K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and N. Steinhau-Kuehl, “Update of the DESY Infrastructure for Cavity Preparation”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO018, pp. 401-404.
- W. Schappert, J. P. Holzbauer, and Y. M. Pischalnikov, “Progress at FNAL in the Field of the Active Resonance Control for Narrow Bandwidth SRF Cavities.”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3355-3357.
- J. Dwivedi et al., “Restoration of RF Cavity for Synchrotron Storage Ring INDUS-1”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16003B, pp. XX-XX.
- G. Papotti, A. A. Gorzawski, M. Hostettler, and R. Schmidt, “Beam Losses Through the LHC Operational Cycle in 2012”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI028, pp. 1400-1402.
- J. Bradley III, T. Hardek, M. T. Lynch, D. E. Rees, W. Roybal, and P. J. Tallerico, “Spallation Neutron Source High-Power RF Transmitter Design for High Availability, Ease of Installation and Cost Containment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG015, pp. 1458-1460.
- J. Buon, “Final Focus Test Beam for the Next Linear Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 125-128.
- A. V. Tollestrup et al., “Measurements of the Longitudinal and Transverse Beam Loss at the Tevatron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB040, pp. 2497-2499.
- C. G. Beetham, R. J. Lauckner, and C. Saltmarsh, “Overview of the SPS/LEP Fast Broadcast Message Timing System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 766-769.
- T.-S. F. Wang, “Robinson Instability and Logitudinal Mode Coupling”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1160-1163.
- J. D. Jarvis et al., “Adsorbate Modification of Emission from Diamond Field Emitters and Carbon Nanotubes”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC59, pp. 372-375.
- C. S. Chien, “Orbits and Nonlinear Effects in Terms of the Field Coefficients in the Median Plane”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 192-194.
- Y. Li, J. Pflueger, E. Gluskin, and N. Vinokurov, “Fine Tuning of the K-parameter of Two Segments of the European XFEL Undulator Systems”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPC28, pp. 144-147.
- N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
- K. A. Brown, I. H. Chiang, A. Pendzick, and T. Tallerico, “Observations of Secondary Emission Chamber Degradation from Very High Intensity Proton Beams at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P047, pp. 2213-2214.
- P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
- C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
- B. Dwersteg et al., “Beam Test of a 9-Cell Superconducting Cavity in the PETRA Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3596-3599.
- X. L. Zhang et al., “Upgrades of the Tevatron Electron Lens”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB077, pp. 1781-1783.
- B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019.
- CA. King and R. Neswold, “Upgrading the Fermilab Fire and Security Reporting System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUCAUST01, pp. 563-566.
- R. Stassen et al., “Recent Results of the HESR RF System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2094-2096.
- W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
- V. N. Barkovsky, Ju. G. Basargin, R. N. Litunovsky, O. A. Minjaev, A. V. Popov, and A. V. Stepanov, “Ion Optical Studies of Extraction Transport and Analysis Systems for 240-cm Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-005, pp. XX-XX.
- C. Feng et al., “Measurement of the Local Energy Spread of Electron Beam at SDUV-FEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOBB01, pp. 2143-2145.
- J. D. Sedillo, J. D. Gilpatrick, J. D. Nguyen, and M. E. Gruchalla, “LANSCE 1L Harp Data Acquisition System Upgrade”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPD11, pp. 438-441.
Back to search