JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Iwata et al., “Upgrade of Septum Magnets for Fast Extraction in J-Parc Main Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2103-2105. doi:10.18429/JACoW-IPAC2022-WEPOTK024
[n]	X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB048, unpublished. 
[n]	M. Zampetakis et al., “Refining the LHC Longitudinal Impedance Model”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 559-562. doi:10.18429/JACoW-HB2023-THBP37
[n]	M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138. 
[n]	Y. G. Song, S. Y. Cho, and J. H. Kim, “EPICS DAQ System for Beam Position Monitor at the KOMAC Linac and Beamlines”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 447-449. doi:10.18429/JACoW-ICALEPCS2021-TUPV027
[n]	J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP025, pp. XX-XX. 
[n]	J. Friedl, “DELTA, The Dortmund Electron Test Storage Ring Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 463-466. 
[n]	D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879. 
[n]	A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974. 
[n]	G. Lawler et al., “High gradient operation of cryogenic C-band RF photogun at UCLA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 527-530. doi:10.18429/JACoW-IPAC2024-MOPR32
[n]	Yu. A. Kubyshin, A. V. Aloev, N. I. Pakhomov, and V. I. Shvedunov, “A Novel Electron Gun for Off-axis Beam Injection”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP290, pp. 2029-2031. 
[n]	S. Keckert et al., “Mitigation of Parasitic Losses in the Quadrupole Resonator Enabling Direct Measurements of Low Residual Resistances of SRF Samples”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1196-1199. doi:10.18429/JACoW-IPAC2022-TUPOTK005
[n]	E. Wisniewski et al., “Fabrication study of corrugated structure for sub-THz by stacking disks”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR28, unpublished. 
[n]	J. P. Koutchouk, “Architecture of the LEP Application Software”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1199-1202. 
[n]	B. Bondarev, A. Durkin, Y. Ivanov, I. Shumakov, and S. Vinogradov, “Some Results of RFQ Modelling Based on New Possibilities of LIDOS.RFQ Codes”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE110, pp. 1616-1618. 
[n]	M. Zhang and Q. G. Zhou, “Study of Nonlinear Beam Dynamics Effects for DEPU at SSRF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC075, pp. 1347-1349. 
[n]	D. Suddeth, “Microwave Ridged Waveguide Beam Pickups”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1886-1888. 
[n]	K. Kawa, T. Szumlak, C. Kokkinos, and F. Lackner, “High fidelity numerical modelling and condition monitoring applied to septum magnets at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3556-3559. doi:10.18429/JACoW-IPAC2024-THPR29
[n]	R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 848-851. doi:10.18429/JACoW-IPAC2019-MOPTS006
[n]	R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3459-3462. doi:10.18429/JACoW-IPAC2021-WEPAB334
[n]	D. Young, “Design of Drift Tube Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-03, pp. 76-97. 
[n]	C. Liu et al., “Longitudinal Dynamics Simulation at Transition Crossing in RHIC with New Landau Cavity”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB08, pp. 37-39. 
[n]	N. D. West, “The Nimrod Injector”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper A-04, pp. 38-49. 
[n]	M. Shimada and Y. Kobayashi, “Design of a 2-Loop Compact ERL”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG208, pp. 50-52. 
[n]	I. Miura et al., “Proposal for a New Ring Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-08, pp. 2074-2077. 
[n]	C. Liu, K. A. Drees, A. Marusic, M. G. Minty, and C. Montag, “Global Optics Correction for Low Energy RHIC Run”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB05, pp. 34-36. 
[n]	S. Iwata et al., “Development of a pulse current monitoring device for the Eddy septum magnets in J-PARC main ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2463-2466. doi:10.18429/JACoW-IPAC2023-TUPM104
[n]	A. I. Novokshonov et al., “Scintillator Nonproportionality Studies at PITZ”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 277-280. doi:10.18429/JACoW-IBIC2022-TUP21
[n]	I. N. Meshkov, “NICA Project at JINR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper MOIO02, pp. 6-9. 
[n]	C. Dickey, G. V. Karpov, J. Madey, A. S. Medvedko, E. I. Shubin, and N. I. Zinevich, “NMR System for Magnetic Field Measurements at the MARK-3 Free Electron Laser”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP009G, pp. 2541-2542. 
[n]	A. Bonatto et al., “On the Development of a Low Peak-Power, High Repetition-Rate Laser Plasma Accelerator at IPEN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1713-1716. doi:10.18429/JACoW-IPAC2021-TUPAB141
[n]	S. Ohnuma, “Phase Oscillation and Transverse Focusing”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-02, pp. 65-75. 
[n]	M. Vogel, X. Jiang, P. Murcek, J. Schaber, C. Wang, and R. Xiang, “Initial Study of GaN Thin Films for Photocathodes Prepared by Magnetron Sputtering on Copper Substrates”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2850-2852. doi:10.18429/JACoW-IPAC2021-WEPAB109
[n]	C. Carli and M. Haj Tahar, “Systematic Effects Limiting the Sensitivity of Magic Energy" Proton EDM Rings"”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 602-605. doi:10.18429/JACoW-IPAC2021-MOPAB178
[n]	C. Toth et al., “Colliding Pulse Injection Experiments in Non-Collinear Geometry for Controlled Laser Plasma Wakefield Acceleration of Electrons”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN112, pp. 2975-2977. 
[n]	L. Ristori et al., “Cold Tests of SSR1 Resonators Manufactured by IUAC for the Fermilab PIP-II Project”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB073, pp. 750-753. 
[n]	F. Gao, R. B. Deng, Z. Jiang, S. Xiang, L. Yin, and S. K. Sharma, “Hammerhead Support Design and Application at SSRF”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 60-62. doi:10.18429/JACoW-MEDSI2018-TUPH16
[n]	J. Y. Tang et al., “SNS Vacuum Instrumentation and Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP062, pp. XX-XX. 
[n]	P. N. Potukuchi et al., “Fabrication of Superconducting Niobium Resonators at IUAC”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper C-06, pp. 266-270. 
[n]	I. Bazarov, M. Lakshmanan, and T. Miyajima, “Maximum achievable beam brightness from photoinjectors”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper PLT20, pp. XX-XX. 
[n]	A. Bonatto, R. Pakter, and F. B. Rizzato, “Nonlinear Propagation of Laser Pulses in Plasmas: a Comparison between Numerical and Analytical Solutions”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD033, pp. 4349-4351. 
[n]	A. V. Fedotov et al., “Beam Dynamics Limits for Low-Energy RHIC Operation”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA10, pp. 75-77. 
[n]	L. Smith, “The New Bevatron Injector”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper A-01, pp. 1-6. 
[n]	N. A. Vinokurov et al., “Status of the Novosibirsk Terahertz FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUCOS01, pp. XX-XX. 
[n]	O. Okhrimenko, V. Iakovenko, V. M. Pugatch, F. Alessio, and G. Corti, “The Radiation Monitoring System for the LHCb Inner Tracker”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU024, pp. 1115-1118. 
[n]	T. Mattison et al., “Status of the SLC Damping Ring Kicker Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2955-2958. 
[n]	J. C. Chang, C. Y. Liu, J. R. Chen, and M. T. Ke, “Air Temperature Analysis and Control Improvement for the Large-Scale Experimental Hall”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99908, pp. XX-XX. 
[n]	F. G. G. Garcia and W. Pellico, “FNAL Proton Source High Intensity Operations and Beam Loss Control”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO3C02, pp. 320-323. 
[n]	L. Lu, T. He, C. C. Xing, and L. Yang, “Design and Low Power Test of a Prototype HOM LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1001-1004. doi:10.18429/JACoW-IPAC2019-MOPTS063
[n]	F. L. Krawczyk et al., “RF-loss Measurements in an Open Coaxial Resonator for Characterization of Copper Plating”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS021, pp. 2376-2378. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search