Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Serrano, I. Acebes, S. Deghaye, W. Heinze, and J. Lewis, “VME Switch for CERN's PS Analog Video System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP534, pp. XX-XX.
[n] J. Serrano, P. ?ülvarez, D. Dom?¡nguez, and J. Lewis, “Nanosecond Level UTC Timing Generation and Stamping in CERN's LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP533, pp. XX-XX.
[n] S. Marks et al., “Magnetic Performance of the Advanced Light Source EPU5.0 Elliptically Polarizing Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR4, pp. 162-164.
[n] M. S. de Jong et al., “A 2856 MHz RF Cavity for the MIT-Bates South Hall Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 832-835.
[n] H. Heo et al., “Development of an X-Band Linearizer System for PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 554-556. doi:10.18429/JACoW-IPAC2016-MOPMY026
[n] W. T. Kitka et al., “Status of the NSRC SOLARIS Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1492-1493. doi:10.18429/JACoW-ICALEPCS2017-THPHA055
[n] A. Oates, “CLARA Gun Temperature Control Using Omron PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1646-1648. doi:10.18429/JACoW-ICALEPCS2017-THPHA114
[n] M. Otani, N. Kawamura, T. Mibe, T. Yamazaki, K. Ishida, and G. Marshall, “Simulation of Surface Muon Beamline, Ultra-Slow Muon Production and Extraction for the J-PARC g-2/EDM Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 970-973. doi:10.18429/JACoW-IPAC2018-TUPAK007
[n] S. G. Tantawi, T. G. Lee, R. D. Ruth, A. E. Vlieks, and M. Zolotorev, “Design of a Multi-Megawatt X-Band Solid State Microwave Switch”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ27, pp. 1584-1586.
[n] M. Woods et al., “A Test Facility for the International Linear Collider at SLAC End Station A for Prototypes of Beam Delivery and IR Components”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP036, pp. 2461-2463.
[n] S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2277-2280. doi:10.18429/JACoW-IPAC2018-WEPAL046
[n] W. Ingalls et al., “Status of the H- Injector Development Program at LANSCE”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA17, pp. 1923-1925.
[n] P. Craievich et al., “Commissioning of the Cavity BPM for the FERMI@Elettra FEL Project”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD14, pp. 329-331.
[n] G. T. Danby, J. E. Allinger, and J. W. Jackson, “Economical Cryogenic Pulsed Synchrotrons for Very High Energies”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 685-690.
[n] O. Mohsen et al., “Recent Progress Toward a Conduction-Cooled Superconducting Radiofrequency Electron Gun”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1604-1607. doi:10.18429/JACoW-IPAC2021-TUPAB098
[n] Y. Shobuda and S. Machida, “Degradation of the Beam passing through Idle Coupled Cavities”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA035, pp. 369-371.
[n] M. Valette et al., “Impact of Superconducting Magnet Protection Equipment on the Circulating Beam in HL-LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3115-3118. doi:10.18429/JACoW-IPAC2018-THPAF062
[n] L. Bizel-Bizellot, M. Ellis, S. M. Pattalwar, M. D. Pendleton, P. A. Smith, and A. E. Wheelhouse, “Innovative Cryogenic Test Facility for Testing SRF Cavity Series Production”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 520-523. doi:10.18429/JACoW-SRF2017-TUPB060
[n] J. W. Staples, J. J. Ayers, D. W. Cheng, J. B. Greer, M. D. Hoff, and A. Ratti, “The SNS Four-Phase LEBT Chopper”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA32, pp. 1961-1963.
[n] D. W. Cheng et al., “Design of the Prototype Low Energy Beam Transport Line for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA31, pp. 1958-1960.
[n] D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 124-127. doi:10.18429/JACoW-MEDSI2016-TUBA04
[n] R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
[n] J. A. MacLachlan, F. E. Mills, and T. L. Owens, “Feed-Forward Compensation for Transient Beam Loading of the 805 MHz Debuncher for the Fermilab Linac Upgrade”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU403, pp. 303-305.
[n] W. T. Kitka, M. K. Falowski, A. M. Marendziak, N. Olszowska, and M. Zaj, “Automation in NSRC SOLARIS With Python and Tango Controls”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 381. doi:10.18429/JACoW-ICALEPCS2019-MOPHA072
[n] I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
[n] J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 280-282. doi:10.18429/JACoW-MEDSI2018-WEPH34
[n] R. Stassen, B. Breitkreutz, and N. Shurkhno, “Recent Results of HESR Original Stochastic Cooling Tanks at COSY”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 913-915. doi:10.18429/JACoW-IPAC2018-TUPAF078
[n] Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
[n] B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4336-4339. doi:10.18429/JACoW-IPAC2021-THPAB270
[n] B. Breitkreutz, R. Stassen, and H. Stockhorst, “Design of Stochastic Pick-Ups and Kickers for Low Beta Particle Beams”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 68-71. doi:10.18429/JACoW-COOL2017-TUP17
[n] M. Killenberg et al., “Drivers and Software for MicroTCA.4”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 725-728. doi:10.18429/JACoW-ICALEPCS2015-WEPGF015
[n] W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 201-204. doi:10.18429/JACoW-MEDSI2016-TUPE18
[n] J. Mariethoz, F. B. Bernard, R. H. Harrison, P. Le Roux, M. P. Peryt, and M. Zerlauth, “The Importance of Layout and Configuration Data for Flexibility during Commissioning and Operation of the LHC Machine Protection Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS142, pp. 2712-2714.
[n] S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309.
[n] K. L. F. Bane et al., “Impedance and Single Bunch Instability Calculations for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS061, pp. 4141-4143.
[n] T. G. Xu et al., “The Study on Beam Loss Control Based on a High Intensity RFQ”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD59, pp. 223-225.
[n] M. Stettler, L. Day, and J. Power, “PC based Instrumentation, Current Efforts and Future Technology”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU102, pp. XX-XX.
[n] W. J. Schneider et al., “First Cell Magnet System Tests”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3269-3272.
[n] W. C. Turner et al., “Reduction of Beam Corkscrew Motion on the Eta-II Linear Induction Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU447, pp. 435-437.
[n] F. Krienen and J. A. MacLachlan, “Antriproton Collection from a Production Target”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2711-2717.
[n] O. Capatina et al., “Overview of the Large Hadron Collider Cryo-magnets Logistics”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH181, pp. 3221-3223.
[n] V. Morozov et al., “Proton and electron RLA optics design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 958-961. doi:10.18429/JACoW-IPAC2023-MOPL180
[n] R. Baer, U. Krause, V. RW. Schaa, W. Schiebel, and M. Thieme, “Development of a New Control System for the FAIR Accelerator Complex at GSI”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP107, pp. 328-330.
[n] A. Masi et al., “SAMbuCa: Sensors Acquisition and Motion Control Framework at CERN”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1179-1186. doi:10.18429/JACoW-ICALEPCS2023-TH2BCO04
[n] J. A. Clarke et al., “Revised SRS Impedance Estimates”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1096-1099.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Serrano, I. Acebes, S. Deghaye, W. Heinze, and J. Lewis, “VME Switch for CERN's PS Analog Video System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP534, pp. XX-XX.
- J. Serrano, P. ?ülvarez, D. Dom?¡nguez, and J. Lewis, “Nanosecond Level UTC Timing Generation and Stamping in CERN's LHC”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP533, pp. XX-XX.
- S. Marks et al., “Magnetic Performance of the Advanced Light Source EPU5.0 Elliptically Polarizing Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUAR4, pp. 162-164.
- M. S. de Jong et al., “A 2856 MHz RF Cavity for the MIT-Bates South Hall Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 832-835.
- H. Heo et al., “Development of an X-Band Linearizer System for PAL-XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 554-556.
- W. T. Kitka et al., “Status of the NSRC SOLARIS Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1492-1493.
- A. Oates, “CLARA Gun Temperature Control Using Omron PLC”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1646-1648.
- M. Otani, N. Kawamura, T. Mibe, T. Yamazaki, K. Ishida, and G. Marshall, “Simulation of Surface Muon Beamline, Ultra-Slow Muon Production and Extraction for the J-PARC g-2/EDM Experiment”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 970-973.
- S. G. Tantawi, T. G. Lee, R. D. Ruth, A. E. Vlieks, and M. Zolotorev, “Design of a Multi-Megawatt X-Band Solid State Microwave Switch”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ27, pp. 1584-1586.
- M. Woods et al., “A Test Facility for the International Linear Collider at SLAC End Station A for Prototypes of Beam Delivery and IR Components”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP036, pp. 2461-2463.
- S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2277-2280.
- W. Ingalls et al., “Status of the H- Injector Development Program at LANSCE”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA17, pp. 1923-1925.
- P. Craievich et al., “Commissioning of the Cavity BPM for the FERMI@Elettra FEL Project”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD14, pp. 329-331.
- G. T. Danby, J. E. Allinger, and J. W. Jackson, “Economical Cryogenic Pulsed Synchrotrons for Very High Energies”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 685-690.
- O. Mohsen et al., “Recent Progress Toward a Conduction-Cooled Superconducting Radiofrequency Electron Gun”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1604-1607.
- Y. Shobuda and S. Machida, “Degradation of the Beam passing through Idle Coupled Cavities”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA035, pp. 369-371.
- M. Valette et al., “Impact of Superconducting Magnet Protection Equipment on the Circulating Beam in HL-LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3115-3118.
- L. Bizel-Bizellot, M. Ellis, S. M. Pattalwar, M. D. Pendleton, P. A. Smith, and A. E. Wheelhouse, “Innovative Cryogenic Test Facility for Testing SRF Cavity Series Production”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 520-523.
- J. W. Staples, J. J. Ayers, D. W. Cheng, J. B. Greer, M. D. Hoff, and A. Ratti, “The SNS Four-Phase LEBT Chopper”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA32, pp. 1961-1963.
- D. W. Cheng et al., “Design of the Prototype Low Energy Beam Transport Line for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA31, pp. 1958-1960.
- D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 124-127.
- R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
- J. A. MacLachlan, F. E. Mills, and T. L. Owens, “Feed-Forward Compensation for Transient Beam Loading of the 805 MHz Debuncher for the Fermilab Linac Upgrade”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU403, pp. 303-305.
- W. T. Kitka, M. K. Falowski, A. M. Marendziak, N. Olszowska, and M. Zaj, “Automation in NSRC SOLARIS With Python and Tango Controls”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 381.
- I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
- J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 280-282.
- R. Stassen, B. Breitkreutz, and N. Shurkhno, “Recent Results of HESR Original Stochastic Cooling Tanks at COSY”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 913-915.
- Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
- B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4336-4339.
- B. Breitkreutz, R. Stassen, and H. Stockhorst, “Design of Stochastic Pick-Ups and Kickers for Low Beta Particle Beams”, in Proc. 11th Workshop on Beam Cooling and Related Topics (COOL'17), Bonn, Germany, Sep. 2017, pp. 68-71.
- M. Killenberg et al., “Drivers and Software for MicroTCA.4”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 725-728.
- W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 201-204.
- J. Mariethoz, F. B. Bernard, R. H. Harrison, P. Le Roux, M. P. Peryt, and M. Zerlauth, “The Importance of Layout and Configuration Data for Flexibility during Commissioning and Operation of the LHC Machine Protection Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS142, pp. 2712-2714.
- S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309.
- K. L. F. Bane et al., “Impedance and Single Bunch Instability Calculations for the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS061, pp. 4141-4143.
- T. G. Xu et al., “The Study on Beam Loss Control Based on a High Intensity RFQ”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD59, pp. 223-225.
- M. Stettler, L. Day, and J. Power, “PC based Instrumentation, Current Efforts and Future Technology”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU102, pp. XX-XX.
- W. J. Schneider et al., “First Cell Magnet System Tests”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3269-3272.
- W. C. Turner et al., “Reduction of Beam Corkscrew Motion on the Eta-II Linear Induction Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU447, pp. 435-437.
- F. Krienen and J. A. MacLachlan, “Antriproton Collection from a Production Target”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2711-2717.
- O. Capatina et al., “Overview of the Large Hadron Collider Cryo-magnets Logistics”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH181, pp. 3221-3223.
- V. Morozov et al., “Proton and electron RLA optics design”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL180, pp. 958-961.
- R. Baer, U. Krause, V. RW. Schaa, W. Schiebel, and M. Thieme, “Development of a New Control System for the FAIR Accelerator Complex at GSI”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP107, pp. 328-330.
- A. Masi et al., “SAMbuCa: Sensors Acquisition and Motion Control Framework at CERN”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH2BCO04, pp. 1179-1186.
- J. A. Clarke et al., “Revised SRS Impedance Estimates”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1096-1099.
Back to search