Favourites
For Word
[n] R. Assmann et al., “Luminosity and Beam Measurements Used for Performance Optimisation in the LEP Collider”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B04, pp. 397-399.
[n] J. Castellanos et al., “Manufacturing of MEBT Combined Quadrupole & Steerer Magnets for the Linear IFMIF Prototype Accelerator LIPAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 840-842. doi:10.18429/JACoW-LINAC2016-THPRC031
[n] M. Dohlus and S. G. Wipf, “Numerical Investigations of Waveguide Input Couplers for the TESLA Superstructure”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5B03, pp. 2096-2100.
[n] W. B. Liu, N. Huang, J. Qiu, J. Tang, S. Wang, and G. Xu, “Design of Beam Transport Line from RCS to Target for CSNS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS041, pp. 3514-3516.
[n] F. Zimmermann, M. Koratzinos, A. P. Blondel, and M. Zanetti, “LEP3: A High Luminosity e+e- Collider in the LHC Tunnel to Study the Higgs Boson”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR078, pp. 2005-2007.
[n] R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 59-63. doi:10.18429/JACoW-ICALEPCS2017-MOCPL03
[n] V. Alferov, Y. Bordanovsky, V. Lagutin, I. Lobov, and A. Lutchev, “Upgrade of the U-70 Proton Synchrotron Extracted Beam Lines Control System: Multiple Access and Data Presentation”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB039, pp. 260-262.
[n] E. H. Bakraji et al., “Protons Activation up to 30 MeV for Trace Analysis in High Purity Materials”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-11, pp. 605-607.
[n] D. P. Pritzkau, A. Menegat, R. H. Siemann, T. G. Lee, and D. U. L. Yu, “Experimental Study of Pulsed Heating of Electromagnetic Cavities”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P029, pp. 3036-3038.
[n] O. Matilla et al., “ALBA Timing System - A Known Architecture with Fast Interlock System Upgrade”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS023, pp. 1024-1027.
[n] C. M. R. Greaves, J. Feng, H. A. Padmore, W. Wan, and D. Dowell, “Metal Cathodes with Reduced Emittance and Enhanced Quantum Efficiency”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB15, pp. 586-589.
[n] S. E. Sampayan, G. J. Caporaso, Y.-J. Chen, T. A. Decker, and W. C. Turner, “Energy Sweep Compensation of Induction Accelerators”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU441, pp. 417-419.
[n] N. Xiong, N. Hauser, and D. Mannicke, “Python Scripting for Instrument Control and Online Data Treatment”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 869-872. doi:10.18429/JACoW-ICALEPCS2015-WEPGF071
[n] P. Ch. Chochula, A. Augustinus, A. N. Kurepin, M. Lechman, O. Pinazza, and P. Rosinsky, “Operational Experience with the ALICE Detector Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB07, pp. 1485-1488.
[n] P. Gomes et al., “Consolidations on the Vacuum Controls of the CERN Accelerators, During the First Long Shutdown of the LHC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 322-325. doi:10.18429/JACoW-ICALEPCS2015-MOPGF104
[n] I. C. Yang et al., “Behavior of Vacuum Pressure in TPS Vacuum System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3222-3224. doi:10.18429/JACoW-IPAC2015-WEPHA048
[n] J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369.
[n] J. Keane et al., “X-Ray RF System Upgrade at the NSLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 141-144.
[n] J. J. Jamroz et al., “ALBA High Voltage Splitter - Power Distribution to Ion Pumps”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS024, pp. 1028-1031.
[n] K. E. Robinson, D. A. G. Deacon, J. M. J. Madey, and M. F. Velghe, “Anomalous Laser Induced Bunch Lengthening on the ACO Storage Ring Free Electron Laser”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3088-3091.
[n] A. Shemyakin et al., “Fermilab Electron Cooling Project: Field Measurements in the Cooling Section Solenoid”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB006, pp. 195-197.
[n] D. Dowell et al., “Analysis of Slice Emittance Measurements for the SLAC Gun Test Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB027, pp. 2104-2106.
[n] L. Masetti et al., “A Scalable and Homogeneous Web-Based Solution for Presenting CMS Control System Data”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB01, pp. 1040-1043.
[n] R. L. Liu et al., “Design and Commissioning of LLRF System for ADS Project in China”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2752-2754. doi:10.18429/JACoW-IPAC2016-WEPOR036
[n] E. Wooldridge and B. Muratori, “4GLS Cavity Considerations for BBU”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 19, pp. 126-128.
[n] H. Weisberg, E. Gill, P. Ingrassia, and E. Rodger, “An Ionization Profile Monitor for the Brookhaven AGS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2179-2182.
[n] J. Staples et al., “A Deuteron Linac for a High-Intensity Neutron Source”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C07, pp. 148-152.
[n] S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz, 550 kW Pulsed Klystron for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE019, pp. 1122-1124.
[n] H. Asano et al., “RF Characteristics of the SDTL for the J-PARC”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP068, pp. 740-742.
[n] J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
[n] Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I3_002.
[n] S. M. Hanna, “Characterization Techniques for X-Band Medical Accelerator Structures”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1B07, pp. 2521-2523.
[n] D. Doll et al., “Low to High Energy Beamstops for APT”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4090, pp. 615-617.
[n] J. Allinger, G. Danby, J. Jackson, and A. Prodell, “Ultra Stable High Field Superconducting Dipoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1323-1325.
[n] M. Bieler, I. V. Agapov, H. Ehrlichmann, J. Keil, G. K. Sahoo, and R. Wanzenberg, “PETRA III Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2589-2591. doi:10.18429/JACoW-IPAC2017-WEPAB014
[n] J. E. Griffin, J. A. MacLachlan, and A. Moretti, “Design of the rf Cavity and Power Ampifier for the Fermilab Antiproton Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3435-3438.
[n] G. Burtner, N. Dobeck, O. Garza, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1905-1908.
[n] P. M. Strubin and N. N. Trofimov, “First Experience with Control and Operational Models for Vacuum Equipment in the AD Decelerator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL4, pp. 346-348.
[n] D. Shu, J. W. J. Anton, S. P. Kearney, A. Li, C. Mao, and Y. Pan, “Precision Mechanical Design of a Miniature Dynamic Mirror Bender for the SSRF Beamline Upgrade Project”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 108-111. doi:10.18429/JACoW-MEDSI2016-TUAA01
[n] R. C. Gupta et al., “Magnetic Design of e-lens Solenoid and Corrector System for RHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP164, pp. 1130-1132.
[n] M. Ivanyan and V. M. Tsakanov, “Coupling Impedance of Rough Resistive Pipe”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS045, pp. 700-702.
[n] L. K. Grob et al., “Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1082-1085. doi:10.18429/JACoW-IPAC2019-MOPTS094
[n] T. L. Lavine, R. H. Miller, P. L. Morton, and R. D. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 126-129.
[n] J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4026-4027. doi:10.18429/JACoW-IPAC2017-THPAB129
[n] K. Bane, C. Adolphsen, T. L. Lavine, M. Ross, J. Seeman, and K. Thompson, “Measurements of Longitudinal Phase Space in the SLC Linac”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1762-1765.
[n] V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
[n] R. Macek, L. Rybarcyk, R. McCrady, T. Zaugg, and J. Holmes, “Recent Studies of the Electron Cloud Induced Beam Instability at the Los Alamos PSR”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper OPR00, pp. 1-5.
[n] M. Ivanyan and V. Tsakanov, “The Analytical Treatment of Resistive Wake in Round Pipe”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH308, pp. 3194-3196.
[n] M. D. Balcazar et al., “Tunable Q-Factor Gas-Filled RF Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2064-2066. doi:10.18429/JACoW-IPAC2018-WEPAG002
[n] B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
[n] D. Yu, J. Clendenin, Y. Luo, and D. Newsham, “Parmela Simulations of a PWT Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB042, pp. 2126-2128.
[n] F. Turkot, W. E. Cooper, R. Hanft, and A. McInturff, “Maximum Field Capability of Energy Saver Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3387-3390.
[n] P. Alvarez, M. Cattin, J. H. Lewis, J. Serrano, and T. Wlostowski, “FPGA Mezzanine Cards for CERN's Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB002, pp. 376-378.
[n] F. Sannibale et al., “APEX Project Phase 0 and I Status and Plans and Activities for Phase II”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB14, pp. 582-585.
[n] A. Gallo et al., “DAFNE Broadband Impedance”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI025, pp. 1494-1496.
[n] E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 22-25. doi:10.18429/JACoW-ICALEPCS2015-MOC3O02
[n] D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
For LaTeX
Use Complete Form
For BibTeX
References
- R. Assmann et al., “Luminosity and Beam Measurements Used for Performance Optimisation in the LEP Collider”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B04, pp. 397-399.
- J. Castellanos et al., “Manufacturing of MEBT Combined Quadrupole & Steerer Magnets for the Linear IFMIF Prototype Accelerator LIPAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 840-842.
- M. Dohlus and S. G. Wipf, “Numerical Investigations of Waveguide Input Couplers for the TESLA Superstructure”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5B03, pp. 2096-2100.
- W. B. Liu, N. Huang, J. Qiu, J. Tang, S. Wang, and G. Xu, “Design of Beam Transport Line from RCS to Target for CSNS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS041, pp. 3514-3516.
- F. Zimmermann, M. Koratzinos, A. P. Blondel, and M. Zanetti, “LEP3: A High Luminosity e+e- Collider in the LHC Tunnel to Study the Higgs Boson”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR078, pp. 2005-2007.
- R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 59-63.
- V. Alferov, Y. Bordanovsky, V. Lagutin, I. Lobov, and A. Lutchev, “Upgrade of the U-70 Proton Synchrotron Extracted Beam Lines Control System: Multiple Access and Data Presentation”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB039, pp. 260-262.
- E. H. Bakraji et al., “Protons Activation up to 30 MeV for Trace Analysis in High Purity Materials”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-11, pp. 605-607.
- D. P. Pritzkau, A. Menegat, R. H. Siemann, T. G. Lee, and D. U. L. Yu, “Experimental Study of Pulsed Heating of Electromagnetic Cavities”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P029, pp. 3036-3038.
- O. Matilla et al., “ALBA Timing System - A Known Architecture with Fast Interlock System Upgrade”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS023, pp. 1024-1027.
- C. M. R. Greaves, J. Feng, H. A. Padmore, W. Wan, and D. Dowell, “Metal Cathodes with Reduced Emittance and Enhanced Quantum Efficiency”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB15, pp. 586-589.
- S. E. Sampayan, G. J. Caporaso, Y.-J. Chen, T. A. Decker, and W. C. Turner, “Energy Sweep Compensation of Induction Accelerators”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU441, pp. 417-419.
- N. Xiong, N. Hauser, and D. Mannicke, “Python Scripting for Instrument Control and Online Data Treatment”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 869-872.
- P. Ch. Chochula, A. Augustinus, A. N. Kurepin, M. Lechman, O. Pinazza, and P. Rosinsky, “Operational Experience with the ALICE Detector Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB07, pp. 1485-1488.
- P. Gomes et al., “Consolidations on the Vacuum Controls of the CERN Accelerators, During the First Long Shutdown of the LHC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 322-325.
- I. C. Yang et al., “Behavior of Vacuum Pressure in TPS Vacuum System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3222-3224.
- J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369.
- J. Keane et al., “X-Ray RF System Upgrade at the NSLS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 141-144.
- J. J. Jamroz et al., “ALBA High Voltage Splitter - Power Distribution to Ion Pumps”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS024, pp. 1028-1031.
- K. E. Robinson, D. A. G. Deacon, J. M. J. Madey, and M. F. Velghe, “Anomalous Laser Induced Bunch Lengthening on the ACO Storage Ring Free Electron Laser”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3088-3091.
- A. Shemyakin et al., “Fermilab Electron Cooling Project: Field Measurements in the Cooling Section Solenoid”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAB006, pp. 195-197.
- D. Dowell et al., “Analysis of Slice Emittance Measurements for the SLAC Gun Test Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB027, pp. 2104-2106.
- L. Masetti et al., “A Scalable and Homogeneous Web-Based Solution for Presenting CMS Control System Data”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB01, pp. 1040-1043.
- R. L. Liu et al., “Design and Commissioning of LLRF System for ADS Project in China”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2752-2754.
- E. Wooldridge and B. Muratori, “4GLS Cavity Considerations for BBU”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 19, pp. 126-128.
- H. Weisberg, E. Gill, P. Ingrassia, and E. Rodger, “An Ionization Profile Monitor for the Brookhaven AGS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2179-2182.
- J. Staples et al., “A Deuteron Linac for a High-Intensity Neutron Source”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C07, pp. 148-152.
- S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz, 550 kW Pulsed Klystron for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE019, pp. 1122-1124.
- H. Asano et al., “RF Characteristics of the SDTL for the J-PARC”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP068, pp. 740-742.
- J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
- Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I3_002.
- S. M. Hanna, “Characterization Techniques for X-Band Medical Accelerator Structures”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1B07, pp. 2521-2523.
- D. Doll et al., “Low to High Energy Beamstops for APT”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4090, pp. 615-617.
- J. Allinger, G. Danby, J. Jackson, and A. Prodell, “Ultra Stable High Field Superconducting Dipoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1323-1325.
- M. Bieler, I. V. Agapov, H. Ehrlichmann, J. Keil, G. K. Sahoo, and R. Wanzenberg, “PETRA III Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2589-2591.
- J. E. Griffin, J. A. MacLachlan, and A. Moretti, “Design of the rf Cavity and Power Ampifier for the Fermilab Antiproton Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3435-3438.
- G. Burtner, N. Dobeck, O. Garza, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1905-1908.
- P. M. Strubin and N. N. Trofimov, “First Experience with Control and Operational Models for Vacuum Equipment in the AD Decelerator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WECL4, pp. 346-348.
- D. Shu, J. W. J. Anton, S. P. Kearney, A. Li, C. Mao, and Y. Pan, “Precision Mechanical Design of a Miniature Dynamic Mirror Bender for the SSRF Beamline Upgrade Project”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 108-111.
- R. C. Gupta et al., “Magnetic Design of e-lens Solenoid and Corrector System for RHIC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP164, pp. 1130-1132.
- M. Ivanyan and V. M. Tsakanov, “Coupling Impedance of Rough Resistive Pipe”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS045, pp. 700-702.
- L. K. Grob et al., “Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1082-1085.
- T. L. Lavine, R. H. Miller, P. L. Morton, and R. D. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 126-129.
- J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4026-4027.
- K. Bane, C. Adolphsen, T. L. Lavine, M. Ross, J. Seeman, and K. Thompson, “Measurements of Longitudinal Phase Space in the SLC Linac”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1762-1765.
- V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
- R. Macek, L. Rybarcyk, R. McCrady, T. Zaugg, and J. Holmes, “Recent Studies of the Electron Cloud Induced Beam Instability at the Los Alamos PSR”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper OPR00, pp. 1-5.
- M. Ivanyan and V. Tsakanov, “The Analytical Treatment of Resistive Wake in Round Pipe”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH308, pp. 3194-3196.
- M. D. Balcazar et al., “Tunable Q-Factor Gas-Filled RF Cavity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2064-2066.
- B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
- D. Yu, J. Clendenin, Y. Luo, and D. Newsham, “Parmela Simulations of a PWT Photoinjector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB042, pp. 2126-2128.
- F. Turkot, W. E. Cooper, R. Hanft, and A. McInturff, “Maximum Field Capability of Energy Saver Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3387-3390.
- P. Alvarez, M. Cattin, J. H. Lewis, J. Serrano, and T. Wlostowski, “FPGA Mezzanine Cards for CERN's Accelerator Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEB002, pp. 376-378.
- F. Sannibale et al., “APEX Project Phase 0 and I Status and Plans and Activities for Phase II”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB14, pp. 582-585.
- A. Gallo et al., “DAFNE Broadband Impedance”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI025, pp. 1494-1496.
- E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 22-25.
- D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4096-4099.
Back to search