JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	N. Bazin et al., “Status of the IFMIF LIPAc SRF Linac”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 74-77. doi:10.18429/JACoW-SRF2017-MOPB012
[n]	R. Kersevan, “Status of the ESRF Vacuum System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03C, pp. 2178-2180. 
[n]	G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880. 
[n]	P. Chevtsov and M. G. Tiefenback, “Beam Emittance Measurement Tool for CEBAF Operations”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOZ03, pp. 25-27. 
[n]	G. Iadarola, B. Bradu, P. Dijkstal, L. Mether, and G. Rumolo, “Impact and Mitigation of Electron Cloud Effects in the Operation of the Large Hadron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2085-2088. doi:10.18429/JACoW-IPAC2017-TUPVA019
[n]	Y. Aoki et al., “Experimental Results of a Photocathode RF Gun driven by a Stabilized All-Solid ps Laser”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A14, pp. 1678-1680. 
[n]	G. Torrisi et al., “Microwave Injection and Coupling Optimization in ECR and MDIS Ion Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1724-1726. doi:10.18429/JACoW-IPAC2017-TUPIK021
[n]	S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 121-124. 
[n]	K. M. Krushelnick et al., “Electron Acceleration Experiments Using the Hercules Laser System at the University of Michigan”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC011, pp. 4074-4076. 
[n]	M. Hoffmann et al., “Operation of Normal Conducting RF Guns with MicroTCA.4”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 841-843. doi:10.18429/JACoW-IPAC2015-MOPHA028
[n]	S. Strokov, G. Kube, M. Lantschner, and D. Lipka, “First measurements of a prototype stripline BPM for PETRA IV comparison with simulation”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 680-684. doi:10.18429/JACoW-IBIC2025-WEPCO26
[n]	R. M. Bodenstein, Y. Roblin, and M. G. Tiefenback, “Real Beam Line Optics from a Synthetic Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE050, pp. 4629-4631. 
[n]	D. O. Calcoen, S. Gabourin, and A. P. Siemko, “CERN Beam Interlock Redundant Dump Trigger Module Performance during LHC Run 2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4189-4191. doi:10.18429/JACoW-IPAC2016-THPOY041
[n]	M. G. Abbott and T. M. Cobb, “An EPICS IOC Builder”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU032, pp. 506-509. 
[n]	M. J. Furseman et al., “Adopting and Adapting Control System Studio at Diamond Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1032-1035. doi:10.18429/JACoW-ICALEPCS2015-WEPGF137
[n]	A. Endo, K. Sakaue, M. Washio, and H. Mizoguchi, “Optimization of High Average Power FEL Beam for EUV Lithography Application”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper FRA04, pp. 990-992. 
[n]	K. Sakaue, A. Endo, and M. Washio, “Design of High Brightness Light Source based on Laser-Compton Undulator for EUV Lithography Mask Inspection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA036, pp. 148-150. 
[n]	V. Kobets et al., “The Electron Linear Accelerator LUE-200 - Driver the IREN Facility”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC010, pp. 346-348. 
[n]	T. M. Cobb, Y. S. Chernousko, and I. S. Uzun, “ZEBRA: a Flexible Solution for Controlling Scanning Experiments”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC069, pp. 736-739. 
[n]	O. Dadoun and P. Bambade, “Backscattering of Secondary Particles into the ILC Detectors from Beam Losses Along the Extraction Lines”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN009, pp. 2725-2727. 
[n]	R. H. A. Farias, L. C. Jahnel, A. R. D. Rodrigues, and P. F. Tavares, “Ramping Efficiency Studies in the LNLS Synchrotron Light Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P057, pp. 3740-3742. 
[n]	L. Celona et al., “A High Intensity Proton Source for the European Spallation Source Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2509-2511. doi:10.18429/JACoW-IPAC2015-WEPWA010
[n]	G. M. wang et al., “Experimental Progress of DC-SC Photoinjector at Peking University”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP048, pp. XX-XX. 
[n]	K. Skoufaris, Y. Papaphilippou, J. Laskar, and Ch. Skokos, “Implementation of High Order Symplectic Integrators with Positive Steps in Tracking Programs”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3484-3487. doi:10.18429/JACoW-IPAC2016-THPMR041
[n]	J. Chen et al., “Status of SRF activities for the SHINE project”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 31-36. doi:10.18429/JACoW-SRF2025-MOB04
[n]	X. Yang et al., “Experiments on a BSM test bench for CSNS-II linac upgrade”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 662-666. doi:10.18429/JACoW-IBIC2025-WEPCO21
[n]	F. R??diger, W. Goettmann, M. Koerfer, G. Schmidt, and K. Wille, “Beam Loss Position Monitoring with Optical Fibres at DELTA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUOCM03, pp. 1032-1034. 
[n]	W. Singer, A. Brinkmann, D. Hui, H. Kaiser, D. Proch, and X. Singer, “Quality Control and Purification Heat Treatment of Niobium for TTF”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUA007, pp. 103-108. 
[n]	J. Yan and K. L. Mahoney, “New Beam Loss Monitor for 12 GeV Upgrade”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP092, pp. 582-584. 
[n]	C. Lannoy, D. Alves, N. Mounet, and T. Pieloni, “Statistical Properties of Schottky Spectra”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 433-437. doi:10.18429/JACoW-IBIC2023-WEP035
[n]	H. Jenhani et al., “Status of the test bench for the PIP-II LB650 cryomodules at CEA”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 655-658. doi:10.18429/JACoW-LINAC2024-THPB012
[n]	K. Skoufaris et al., “Numerical Optimization of DC Wire Compensation in HL-LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 570-573. doi:10.18429/JACoW-IPAC2019-MOPMP053
[n]	R. Kersevan and M. Hahn, “Status Report on the Performance of NEG-coated Chambers at the ESRF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH172, pp. 1420-1422. 
[n]	A. Mosnier et al., “Superconducting RF Activities at SACLAY : Status Report”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89A08, pp. XX-XX. 
[n]	M. Jacewicz, Ch. Borgmann, M. Olvegaard, J. M. Y. Ruber, V. G. Ziemann, and J. W. Kovermann, “Novel Diagnostics for Breakdown Studies”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF30, pp. 287-290. 
[n]	J. Yan, T. L. Allison, B. Bevins, A. Cuffe, and C. Seaton, “New EPICS/RTEMS IOC Based on Altera SOC at Jefferson Lab”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 304-306. doi:10.18429/JACoW-ICALEPCS2017-TUMPL03
[n]	C. H. Rivetta, K. J. Bertsche, A. Drago, and M. K. Sullivan, “Longitudinal Bunch Position Control for the Super-B Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP050, pp. 2607-2609. 
[n]	Y. L. Chi et al., “Progress of Injector-1 and Main Linac of Chinese ADS Proton Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO040, pp. 3854-3856. 
[n]	R. Appleby, P. Bambade, O. Dadoun, and A. Ferrari, “Benchmarking of Tracking Codes (BDSIM/DIMAD) using the ILC Extraction Lines”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS078, pp. 733-735. 
[n]	O. Grimm, “Coherent Radiation Diagnostics for Short Bunches”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THYC02, pp. 2653-2657. 
[n]	H. Krueger et al., “Designing the Photon Beamline Frontends in the PETRAIII Extension Project”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 330-332. doi:10.18429/JACoW-MEDSI2016-WEPE09
[n]	H. Hisamatsu et al., “Present Status of KEKB Vacuum System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A18, pp. 2304-2306. 
[n]	A. Willner, H. Delsim-Hashemi, O. Grimm, J. Rossbach, and B. Schmidt, “Bunch Diagnostics with Coherent Infrared Undulator Radiation at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC110, pp. 1320-1322. 
[n]	W. Goettmann, M. Koerfer, and F. Wulf, “Beam Profile Measurement with Optical Fiber Sensors at FLASH”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB25, pp. 123-125. 
[n]	F. Zimmermann et al., “Updated High-Energy LHC Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 524-527. doi:10.18429/JACoW-IPAC2019-MOPMP037

For LaTeX

Use Complete Form

For BibTeX

References

Back to search