Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Wolf et al., “Expansion of the MTCA Based Direct Sampling LLRF at MedAustron for Hadron Synchrotron Applications”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 63-65. doi:10.18429/JACoW-IBIC2023-MOP013
[n] M. S. Zisman, R. A. Bell, W. Barletta, and J. M. Dorfan, “PEP-II Design Update and R&D Results”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2010-2013.
[n] J. Staples et al., “A Deuteron Linac for a High-Intensity Neutron Source”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C07, pp. 148-152.
[n] A. Galdi et al., “Towards the Optimization Of Photocathode Properties Via Surface Science Techniques: A Study On Cs3Sb Thin Film Growth”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 224-227. doi:10.18429/JACoW-NAPAC2019-MOPLH24
[n] M. Uesaka, T. Hosokai, K. Kinoshita, and A. Zhidkov, “Generation of Femtosecond Electron Bunches and Hard-X-Rays by Ultra-Intense Laser Wake Field Acceleration in a Gas Jet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB090, pp. 2258-2260.
[n] R. M. Jones, N. M. Kroll, R. H. Miller, R. D. Ruth, and J. W. Wang, “Advanced Damped Detuned Structure Development at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W014, pp. 548-550.
[n] S. Saraf, N. Balakrishnan, and J. B. Greer, “Control Systems Design for LCLS-II Temperature Monitoring and Injector Equipment Protection System at SLAC”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOPHA127, pp. XX-XX.
[n] A. Mostacci et al., “Characterization of ps-spaced Comb Beams at SPARC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD055, pp. 1527-1529.
[n] Y. Jongen and G. Ryckewaert, “The Louvain-la-Neuve Injector Cyclotron Project”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-09, pp. 618-621.
[n] J. Safranek, G. Portmann, and A. Terebilo, “MATLAB-BASED LOCO”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE003, pp. 1184-1186.
[n] L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516.
[n] S. Magyary et al., “Operating Experience with a New Accelerator Control System Based upon Microprocessors”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2201-2204.
[n] R. Nelson, B. Oerter, T. Shea, and C. Sibley, “SNS Timing System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper FRAT001, pp. XX-XX.
[n] P. B. Cheblakov, S. E. Karnaev, and J. H. De Long, “NSLS-II Booster Timing System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS015, pp. 1003-1005.
[n] M. A. Fedorov, G. K. Brunton, C. M. Estes, J. M. Fisher, C. D. Marshall, and E. A. Stout, “Analyzing Off-normals in Large Distributed Control Systems using Deep Packet Inspection and Data Mining Techniques”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC086, pp. 1278-1280.
[n] A. D. Casey et al., “Modernization Challenges for the IT Infrastructure at the National Ignition Facility”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 867. doi:10.18429/JACoW-ICALEPCS2019-WEAPP02
[n] P. Niknejadi et al., “Status of the Transverse Diagnostics at FLASHForward”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1630-1633. doi:10.18429/JACoW-IPAC2018-TUPML040
[n] A. M. Sessler, “Laser Accelerators”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3145-3150.
[n] S. Ramberger et al., “CERN Linac4 Drift Tube Linac Manufacturing and Assembly”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP036, pp. 923-925.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Wolf et al., “Expansion of the MTCA Based Direct Sampling LLRF at MedAustron for Hadron Synchrotron Applications”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP013, pp. 63-65.
- M. S. Zisman, R. A. Bell, W. Barletta, and J. M. Dorfan, “PEP-II Design Update and R&D Results”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2010-2013.
- J. Staples et al., “A Deuteron Linac for a High-Intensity Neutron Source”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C07, pp. 148-152.
- A. Galdi et al., “Towards the Optimization Of Photocathode Properties Via Surface Science Techniques: A Study On Cs3Sb Thin Film Growth”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 224-227.
- M. Uesaka, T. Hosokai, K. Kinoshita, and A. Zhidkov, “Generation of Femtosecond Electron Bunches and Hard-X-Rays by Ultra-Intense Laser Wake Field Acceleration in a Gas Jet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB090, pp. 2258-2260.
- R. M. Jones, N. M. Kroll, R. H. Miller, R. D. Ruth, and J. W. Wang, “Advanced Damped Detuned Structure Development at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W014, pp. 548-550.
- S. Saraf, N. Balakrishnan, and J. B. Greer, “Control Systems Design for LCLS-II Temperature Monitoring and Injector Equipment Protection System at SLAC”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOPHA127, pp. XX-XX.
- A. Mostacci et al., “Characterization of ps-spaced Comb Beams at SPARC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD055, pp. 1527-1529.
- Y. Jongen and G. Ryckewaert, “The Louvain-la-Neuve Injector Cyclotron Project”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-09, pp. 618-621.
- J. Safranek, G. Portmann, and A. Terebilo, “MATLAB-BASED LOCO”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE003, pp. 1184-1186.
- L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516.
- S. Magyary et al., “Operating Experience with a New Accelerator Control System Based upon Microprocessors”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2201-2204.
- R. Nelson, B. Oerter, T. Shea, and C. Sibley, “SNS Timing System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper FRAT001, pp. XX-XX.
- P. B. Cheblakov, S. E. Karnaev, and J. H. De Long, “NSLS-II Booster Timing System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS015, pp. 1003-1005.
- M. A. Fedorov, G. K. Brunton, C. M. Estes, J. M. Fisher, C. D. Marshall, and E. A. Stout, “Analyzing Off-normals in Large Distributed Control Systems using Deep Packet Inspection and Data Mining Techniques”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC086, pp. 1278-1280.
- A. D. Casey et al., “Modernization Challenges for the IT Infrastructure at the National Ignition Facility”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 867.
- P. Niknejadi et al., “Status of the Transverse Diagnostics at FLASHForward”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1630-1633.
- A. M. Sessler, “Laser Accelerators”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3145-3150.
- S. Ramberger et al., “CERN Linac4 Drift Tube Linac Manufacturing and Assembly”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP036, pp. 923-925.
Back to search