Favourites
For Word
[n] H. Frese, G. Hochweller, W. Krechlok, and R. Schmitz, “FPSS-A Fast Packet Switching System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2377-2380.
[n] A. S. Fisher et al., “Design of an X-ray Imaging System for the Low-Energy Ring of PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT154, pp. 2819-2821.
[n] D. Lipka, J. B?ñhr, F. Stephan, D. Richter, and K. Fl?Âttmann, “Measurement of the Longitudinal Phase Space at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI062, pp. 1792-1794.
[n] J. Unger, A. Fedotov, G. Hoffstaetter, J. Kewisch, and S. Seletskiy, “Dynamic aperture correction for Ring Electron Cooler”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS117, unpublished.
[n] N. Chauvin et al., “30 kW Beam Commissioning of the High-Intensity Proton Accelerator IPHI: Experiments, Simulations and Space Charge”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper TUC1I2, unpublished.
[n] H. Huang et al., “A p-Carbon CNI Polarimeter for RHIC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAR5, pp. 471-473.
[n] S. A. Wolbers et al., “Tevatron Beam Position Monitor Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPC004, pp. 410-412.
[n] I. Draganic, H. Andrews, J. Gioia, J. Hollabaugh, and M. Chavez, “High vacuum measurements at a linear inductive accelerator module”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR65, unpublished.
[n] S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
[n] M. G. Minty et al., “Energy Change of a Depolarizing Resonance Due to a Type-3 Siberian Snake”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2506-2509.
[n] D. Kr?ñmer, “Baseline Design for the Facility for Antiproton and Ion Research (FAIR) Finalized”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH076, pp. 205-207.
[n] V. H. Ranjbar, E. C. Aschenauer, H. Huang, A. Marusic, F. M?®ot, and V. Schoefer, “Modeling RHIC Spin Tilt as Lattice Imperfections”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1884-1885. doi:10.18429/JACoW-IPAC2022-WEPOPT020
[n] J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 479-482.
[n] A. J. Otter and P. A. Reeve, “Magnets for TRIUMF's KAON factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2363-2366.
[n] D. E. Lobb, “An Axi-Symmetric High Flux Muon Channel”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-16, pp. 2020-2023.
[n] W. Manwaring, “Ramping Controls for the IUCF Storage Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1258-1261.
[n] U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1132-1135.
[n] K. Batchelor et al., “Operational Experience on the Brookhaven National Laboratory Accelerator Test Facility”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 736-739.
[n] V. Chimenti, A. Clozza, H. Hsieh, and C. Vaccarezza, “DAPhiNE Vacuum System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1561-1564.
[n] K. Halbach, “Effect of Drift Tube Tolerances on the Electric Field Distribution along the Length of an Alvarez Cavity”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-7, pp. 1141-1149.
[n] S. Yammine et al., “Hardware Commissioning of the HL-LHC Inner Triplet String Facility at CERN: Individual System and Short Circuit Tests”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3853-3856. doi:10.18429/JACoW-IPAC2024-THPS50
[n] W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1216-1219.
[n] E. W. Blackmore et al., “Improved Beam Quality at TRIUMF”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3218-3221.
[n] T. Saito, M. Inoue, A. Shimizu, H. Tamura, and I. Miura, “Aluminium RF Cavity for the RCNP Ring Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J13, pp. 381-384.
[n] A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2898-2901.
[n] M. Burns et al., “Cell Design for the DARHT Linear Induction Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2958-2961.
[n] R. L. Poirier, T. Enegren, and C. Haddock, “Perpendicular Biased Ferrite Tuned RF Cavity for the TRIUMF KAON Factory Booster Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 171-174.
[n] J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
[n] M. Barton et al., “Performance Report on the Post Conversion AGS”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 226-231.
[n] X. J. Wang et al., “Experimental Characterization of a SASE FEL in the Exponential Gain and Saturation Regimes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP052, pp. 1204-1206.
[n] T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
[n] T. J. P. Ellison, M. S. Ball, and B. J. Hamilton, “Betatron Ping" Tune Measurement System for the IUCF Cooler Synchrotron/Storage Ring"”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2243-2246.
[n] G. Ciovati et al., “Cavity Production and Testing of the First C75 Cryomodule for CEBAF”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 250. doi:10.18429/JACoW-SRF2021-MOPCAV001
[n] I. Thomson, M. B. Christensen, M. H. Gibson, and G. J. G. Janssens, “The Sensitivity of Microwave Bipolar Transistors and Amplifiers to Ionizing Radiation”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4298-4307.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Frese, G. Hochweller, W. Krechlok, and R. Schmitz, “FPSS-A Fast Packet Switching System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2377-2380.
- A. S. Fisher et al., “Design of an X-ray Imaging System for the Low-Energy Ring of PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT154, pp. 2819-2821.
- D. Lipka, J. B?ñhr, F. Stephan, D. Richter, and K. Fl?Âttmann, “Measurement of the Longitudinal Phase Space at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI062, pp. 1792-1794.
- J. Unger, A. Fedotov, G. Hoffstaetter, J. Kewisch, and S. Seletskiy, “Dynamic aperture correction for Ring Electron Cooler”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS117, unpublished.
- N. Chauvin et al., “30 kW Beam Commissioning of the High-Intensity Proton Accelerator IPHI: Experiments, Simulations and Space Charge”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUC1I2, unpublished.
- H. Huang et al., “A p-Carbon CNI Polarimeter for RHIC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THAR5, pp. 471-473.
- S. A. Wolbers et al., “Tevatron Beam Position Monitor Upgrade”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPC004, pp. 410-412.
- I. Draganic, H. Andrews, J. Gioia, J. Hollabaugh, and M. Chavez, “High vacuum measurements at a linear inductive accelerator module”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR65, unpublished.
- S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
- M. G. Minty et al., “Energy Change of a Depolarizing Resonance Due to a Type-3 Siberian Snake”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2506-2509.
- D. Kr?ñmer, “Baseline Design for the Facility for Antiproton and Ion Research (FAIR) Finalized”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH076, pp. 205-207.
- V. H. Ranjbar, E. C. Aschenauer, H. Huang, A. Marusic, F. M?®ot, and V. Schoefer, “Modeling RHIC Spin Tilt as Lattice Imperfections”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1884-1885.
- J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 479-482.
- A. J. Otter and P. A. Reeve, “Magnets for TRIUMF's KAON factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2363-2366.
- D. E. Lobb, “An Axi-Symmetric High Flux Muon Channel”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-16, pp. 2020-2023.
- W. Manwaring, “Ramping Controls for the IUCF Storage Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1258-1261.
- U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1132-1135.
- K. Batchelor et al., “Operational Experience on the Brookhaven National Laboratory Accelerator Test Facility”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 736-739.
- V. Chimenti, A. Clozza, H. Hsieh, and C. Vaccarezza, “DAPhiNE Vacuum System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1561-1564.
- K. Halbach, “Effect of Drift Tube Tolerances on the Electric Field Distribution along the Length of an Alvarez Cavity”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper K-7, pp. 1141-1149.
- S. Yammine et al., “Hardware Commissioning of the HL-LHC Inner Triplet String Facility at CERN: Individual System and Short Circuit Tests”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS50, pp. 3853-3856.
- W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1216-1219.
- E. W. Blackmore et al., “Improved Beam Quality at TRIUMF”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3218-3221.
- T. Saito, M. Inoue, A. Shimizu, H. Tamura, and I. Miura, “Aluminium RF Cavity for the RCNP Ring Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J13, pp. 381-384.
- A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2898-2901.
- M. Burns et al., “Cell Design for the DARHT Linear Induction Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2958-2961.
- R. L. Poirier, T. Enegren, and C. Haddock, “Perpendicular Biased Ferrite Tuned RF Cavity for the TRIUMF KAON Factory Booster Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 171-174.
- J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
- M. Barton et al., “Performance Report on the Post Conversion AGS”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 226-231.
- X. J. Wang et al., “Experimental Characterization of a SASE FEL in the Exponential Gain and Saturation Regimes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP052, pp. 1204-1206.
- T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
- T. J. P. Ellison, M. S. Ball, and B. J. Hamilton, “Betatron Ping" Tune Measurement System for the IUCF Cooler Synchrotron/Storage Ring"”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2243-2246.
- G. Ciovati et al., “Cavity Production and Testing of the First C75 Cryomodule for CEBAF”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 250.
- I. Thomson, M. B. Christensen, M. H. Gibson, and G. J. G. Janssens, “The Sensitivity of Microwave Bipolar Transistors and Amplifiers to Ionizing Radiation”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4298-4307.
Back to search