Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1190-1193.
[n] J. Sebek, A. Hill, J. Judkins, A. Krasnykh, S. Park, and H. Schwarz, “SPEAR 2 RF System Loads”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH072, pp. 939-941.
[n] M. Cavellier, W. Beeckman, F. Forest, and J. D. Holzmann, “Turnkey Systems Cost Optimization by Iterative Design of Magnets and Power Supplies”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2239-2240. doi:10.18429/JACoW-IPAC2015-TUPWI001
[n] Z. Mart?â et al., “Fast Orbit Response Matrix Measurements at ALBA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 365-367. doi:10.18429/JACoW-IPAC2017-MOPAB102
[n] M. Liu, X. L. Dai, and C. X. Yin, “Stable Transmission of RF Signals and Timing Events With Accuracy at Femtoseconds”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 491-493. doi:10.18429/JACoW-IBIC2016-TUPG61
[n] P. Gross, R. Doelling, H. Klein, J. Pozimski, T. Weis, and J. Wiegand, “An Electron Beam Probe for Ion Beam Diagnosis”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 806-809.
[n] J. A. Martin et al., “Superconducting Conversion of the Oak Ridge Isochronous Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2092-2095.
[n] M. Liepe et al., “Progress on Superconducting RF Work for the Cornell ERL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC073, pp. 2381-2383.
[n] M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “A New Timing System: the Real-time Synchronized Data Bus”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA032, pp. 1396-1398.
[n] M. Therasse et al., “First HIE-ISOLDE Cryo-module Assembly at CERN”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB106, pp. 874-878.
[n] J. H. Li et al., “The Conceptual Design of the China White Neutron Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2127-2130. doi:10.18429/JACoW-IPAC2014-WEPRO075
[n] M. Stirbet et al., “High Power RF Tests on Fundamental Power Couplers for the SNS Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO016, pp. 2283-2285.
[n] A. L. Vikharev et al., “First High-Power Experiments on a Two-Channel X-Band Active RF Pulse Compressor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE030, pp. 1147-1149.
[n] F. J. Decker, “Channeling Crystals for Positron Production”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2002-2005.
[n] K. Fl?Âttmann, “Polarized and Unpolarized Positron Sources for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH2-03, pp. 681-685.
[n] J.-P. Lavieville, P. Lebasque, W. Beeckman, and O. Cosson, “Adjustable Pulse Duration Fast Kicker for the CRYRING Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD069, pp. 3671-3673.
[n] E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
[n] D. Janssen and V. Volkov, “Design of a Superconducting Cavity for a SRF Injector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS044, pp. 2472-2474.
[n] K. Fuchsberger, T. Baer, R. Schmidt, and J. Wenninger, “LHC Orbit Correction Reproducibility and Related Machine Protection”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP010, pp. 3746-3748.
[n] G. Cuni et al., “BL13-XALOC, MX experiments at Alba: Current Status and Ongoing Improvements”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC061, pp. 714-717.
[n] T. Vsevolozhskaya et al., “Liquid Metal Target for NLC Positron Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH126, pp. 1505-1507.
[n] R. Nagai et al., “Demonstration of High-flux Photon Generation from an ERL-based Laser Compton Photon Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1607-1609. doi:10.18429/JACoW-IPAC2015-TUPJE002
[n] M. T. Heron et al., “The Diamond Light Source Control System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH113, pp. 3068-3070.
[n] L. Ferrucci, C. Pagani, and L. Serafini, “Short RF Pulse Propagation in a Traveling Wave Structure”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-45, pp. 640-642.
[n] J. Y. Tang et al., “SNS Vacuum Instrumentation and Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP062, pp. XX-XX.
[n] D. Zyuzin, R. Maier, Y. Senichev, S. N. Andrianov, A. N. Ivanov, and M. Berz, “Comparison of Different Numerical Modelling Methods for Beam Dynamics in Electrostatic Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC071, pp. 1335-1337.
[n] E. F. Daly, D. Bostic, A. Lisin, M. Palrang, C. Perkins, and K. Skarpaas, “Stretchforming Vacuum Chambers for the PEP-II B-Factory High Energy Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP10, pp. 2057-2059.
[n] R. Cee et al., “Beam Diagnostics of High Intense Ion Beams on the Heidelberg High Current Injector”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B13, pp. 1705-1707.
For LaTeX
Use Complete Form
For BibTeX
References
- R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1190-1193.
- J. Sebek, A. Hill, J. Judkins, A. Krasnykh, S. Park, and H. Schwarz, “SPEAR 2 RF System Loads”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH072, pp. 939-941.
- M. Cavellier, W. Beeckman, F. Forest, and J. D. Holzmann, “Turnkey Systems Cost Optimization by Iterative Design of Magnets and Power Supplies”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2239-2240.
- Z. Mart?â et al., “Fast Orbit Response Matrix Measurements at ALBA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 365-367.
- M. Liu, X. L. Dai, and C. X. Yin, “Stable Transmission of RF Signals and Timing Events With Accuracy at Femtoseconds”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 491-493.
- P. Gross, R. Doelling, H. Klein, J. Pozimski, T. Weis, and J. Wiegand, “An Electron Beam Probe for Ion Beam Diagnosis”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 806-809.
- J. A. Martin et al., “Superconducting Conversion of the Oak Ridge Isochronous Cyclotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2092-2095.
- M. Liepe et al., “Progress on Superconducting RF Work for the Cornell ERL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC073, pp. 2381-2383.
- M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “A New Timing System: the Real-time Synchronized Data Bus”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA032, pp. 1396-1398.
- M. Therasse et al., “First HIE-ISOLDE Cryo-module Assembly at CERN”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB106, pp. 874-878.
- J. H. Li et al., “The Conceptual Design of the China White Neutron Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2127-2130.
- M. Stirbet et al., “High Power RF Tests on Fundamental Power Couplers for the SNS Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO016, pp. 2283-2285.
- A. L. Vikharev et al., “First High-Power Experiments on a Two-Channel X-Band Active RF Pulse Compressor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE030, pp. 1147-1149.
- F. J. Decker, “Channeling Crystals for Positron Production”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2002-2005.
- K. Fl?Âttmann, “Polarized and Unpolarized Positron Sources for Linear Colliders”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH2-03, pp. 681-685.
- J.-P. Lavieville, P. Lebasque, W. Beeckman, and O. Cosson, “Adjustable Pulse Duration Fast Kicker for the CRYRING Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD069, pp. 3671-3673.
- E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
- D. Janssen and V. Volkov, “Design of a Superconducting Cavity for a SRF Injector”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS044, pp. 2472-2474.
- K. Fuchsberger, T. Baer, R. Schmidt, and J. Wenninger, “LHC Orbit Correction Reproducibility and Related Machine Protection”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP010, pp. 3746-3748.
- G. Cuni et al., “BL13-XALOC, MX experiments at Alba: Current Status and Ongoing Improvements”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC061, pp. 714-717.
- T. Vsevolozhskaya et al., “Liquid Metal Target for NLC Positron Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH126, pp. 1505-1507.
- R. Nagai et al., “Demonstration of High-flux Photon Generation from an ERL-based Laser Compton Photon Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1607-1609.
- M. T. Heron et al., “The Diamond Light Source Control System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH113, pp. 3068-3070.
- L. Ferrucci, C. Pagani, and L. Serafini, “Short RF Pulse Propagation in a Traveling Wave Structure”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-45, pp. 640-642.
- J. Y. Tang et al., “SNS Vacuum Instrumentation and Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP062, pp. XX-XX.
- D. Zyuzin, R. Maier, Y. Senichev, S. N. Andrianov, A. N. Ivanov, and M. Berz, “Comparison of Different Numerical Modelling Methods for Beam Dynamics in Electrostatic Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC071, pp. 1335-1337.
- E. F. Daly, D. Bostic, A. Lisin, M. Palrang, C. Perkins, and K. Skarpaas, “Stretchforming Vacuum Chambers for the PEP-II B-Factory High Energy Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP10, pp. 2057-2059.
- R. Cee et al., “Beam Diagnostics of High Intense Ion Beams on the Heidelberg High Current Injector”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B13, pp. 1705-1707.
Back to search