Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Szumega et al., “Characterization of an IRRAD beam profile monitor at the CERN T8 beamline and possible improvements via cross-analysis with multiwire proportional chamber”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2921-2923. doi:10.18429/JACoW-IPAC2025-THPM111
[n] O. Chimalpopoca et al., “Engineering and Fabrication of the High Gradient Structure for Compact Ion Therapy Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 267-269. doi:10.18429/JACoW-NAPAC2019-MOPLO15
[n] L. Nevay et al., “BDSIM v1.7.0 developments for the modelling of accelerators and their environment”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2821-2824. doi:10.18429/JACoW-IPAC2023-WEPA074
[n] S. Heifets et al., “Impedance Study for the PEP-II B-factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC01, pp. 2317-2318.
[n] W. Wittmer et al., “SLAC Linac Preparations for FACET”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP007, pp. 61-63.
[n] K. Nakamura, R. Liou, and M. Gundersen, “High Density Plasma Source for Plasma Lens Experiments”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3537-3540.
[n] Z. Patel et al., “The Cryogenic Undulator Upgrade Programme at Diamond Light Source”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 211-214. doi:10.18429/JACoW-FLS2023-WE4P36
[n] L. Andolfato et al., “The ELT primary mirror fault detection, isolation, and recovery software”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1372-1379. doi:10.18429/JACoW-ICALEPCS2025-THBR001
[n] C. Li and Y.-C. Chae, “CETASim: a numerical tool for beam collective effect study in storage rings”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 456-458. doi:10.18429/JACoW-IPAC2025-MOPM060
[n] G. Huffman, D. Boilard, and D. Stone, “Power Limits for Accelerator Tubes from UHF to Ka Band”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0033, pp. 180-182.
[n] F. Ravotti et al., “The IRRAD Proton Irradiation Facility Data Management, Analytics, Control and Beam Diagnostic systems: current performance and outlook beyond the CERN LS3”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper TUPD013, unpublished.
[n] A. Edwards et al., “RFD crab cavity HOM evolution: dressed cavities through to cryomodule testing at 2 K”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP30, unpublished.
[n] M. Dehn et al., “The MAMI-C Accelerator: 25 Years of Operation and Strategies for the Next Decade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1816-1818. doi:10.18429/JACoW-IPAC2017-TUPIK054
[n] M. Pande et al., “Performance evaluation and enhancement in kW level SSAs”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB010, unpublished.
[n] H. Wang, J. Henry, and F. Marhauser, “Critical Dipole Modes in JLAB Upgrade Cavities”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP009, pp. 776-778.
[n] A. Nicoletti and M. Martino, “Data-Driven Controller Design for High Precision Pulsed Power Converters for Bumper Magnets of the PS Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1928-1930. doi:10.18429/JACoW-IPAC2017-TUPIK096
[n] H. Li et al., “The Integration and RF Conditioning of the ESS Double-Spoke Prototype Cryomodule at FREIA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2952-2955. doi:10.18429/JACoW-IPAC2019-WEPRB061
[n] S. Rimjaem and P. Jaikaew, “Progress on infrared/terahertz free-electron laser and ultrafast laser facility at Chiang Mai University”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS098, unpublished.
[n] O. O. Andreassen et al., “Integrating COTS Equipment in the CERN Accelerator Domain”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1137. doi:10.18429/JACoW-ICALEPCS2019-WEPHA026
[n] A. Katrusiak, O. Shelbaya, R. Baartman, O. Kester, and C. Ruiz, “Autofocusing accelerator beams”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3473-3476. doi:10.18429/JACoW-IPAC2024-THPG87
[n] G. Romagnoli et al., “Engineering studies on collimators for CERN’s experimental areas”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR69, unpublished.
[n] N. Stapley and W. Sliwinski, “Applying Agile Project Management for Accelerator Controls Software”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB05, pp. 612-614.
[n] A. Kosrmlj, R. Sabjan, I. Verstovsek, K. Zagar, and G. Pajor, “Systematic Production of Beamline and Other Turnkey Control Systems”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB14, pp. 632-634.
[n] M. Buttner, J. Lauener, K. Sigerud, M. Sobczak, N. Stapley, and P. Charrue, “The DIAMON Project -- Monitoring and Diagnostics for the CERN Controls Infrastructure”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA35, pp. 588-590.
[n] W. H. Park et al., “A DC/DC Converter Test Board and Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP537, pp. XX-XX.
[n] G.-T. Park et al., “Status Update of a Harmonic Kicker Development for JLEIC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3047-3050. doi:10.18429/JACoW-IPAC2019-WEPRB099
[n] F. Ravotti et al., “The IRRAD Proton Irradiation Facility Data Management, Analytics, Control and Beam Diagnostic systems: current performance and outlook beyond the CERN LS3”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 356-362. doi:10.18429/JACoW-ICALEPCS2025-TUMG003
For LaTeX
Use Complete Form
For BibTeX
References
- J. Szumega et al., “Characterization of an IRRAD beam profile monitor at the CERN T8 beamline and possible improvements via cross-analysis with multiwire proportional chamber”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM111, pp. 2921-2923.
- O. Chimalpopoca et al., “Engineering and Fabrication of the High Gradient Structure for Compact Ion Therapy Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 267-269.
- L. Nevay et al., “BDSIM v1.7.0 developments for the modelling of accelerators and their environment”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA074, pp. 2821-2824.
- S. Heifets et al., “Impedance Study for the PEP-II B-factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC01, pp. 2317-2318.
- W. Wittmer et al., “SLAC Linac Preparations for FACET”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP007, pp. 61-63.
- K. Nakamura, R. Liou, and M. Gundersen, “High Density Plasma Source for Plasma Lens Experiments”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3537-3540.
- Z. Patel et al., “The Cryogenic Undulator Upgrade Programme at Diamond Light Source”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper WE4P36, pp. 211-214.
- L. Andolfato et al., “The ELT primary mirror fault detection, isolation, and recovery software”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1372-1379.
- C. Li and Y.-C. Chae, “CETASim: a numerical tool for beam collective effect study in storage rings”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, pp. 456-458.
- G. Huffman, D. Boilard, and D. Stone, “Power Limits for Accelerator Tubes from UHF to Ka Band”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0033, pp. 180-182.
- F. Ravotti et al., “The IRRAD Proton Irradiation Facility Data Management, Analytics, Control and Beam Diagnostic systems: current performance and outlook beyond the CERN LS3”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper TUPD013, unpublished.
- A. Edwards et al., “RFD crab cavity HOM evolution: dressed cavities through to cryomodule testing at 2 K”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP30, unpublished.
- M. Dehn et al., “The MAMI-C Accelerator: 25 Years of Operation and Strategies for the Next Decade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1816-1818.
- M. Pande et al., “Performance evaluation and enhancement in kW level SSAs”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB010, unpublished.
- H. Wang, J. Henry, and F. Marhauser, “Critical Dipole Modes in JLAB Upgrade Cavities”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP009, pp. 776-778.
- A. Nicoletti and M. Martino, “Data-Driven Controller Design for High Precision Pulsed Power Converters for Bumper Magnets of the PS Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1928-1930.
- H. Li et al., “The Integration and RF Conditioning of the ESS Double-Spoke Prototype Cryomodule at FREIA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2952-2955.
- S. Rimjaem and P. Jaikaew, “Progress on infrared/terahertz free-electron laser and ultrafast laser facility at Chiang Mai University”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS098, unpublished.
- O. O. Andreassen et al., “Integrating COTS Equipment in the CERN Accelerator Domain”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1137.
- A. Katrusiak, O. Shelbaya, R. Baartman, O. Kester, and C. Ruiz, “Autofocusing accelerator beams”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG87, pp. 3473-3476.
- G. Romagnoli et al., “Engineering studies on collimators for CERN’s experimental areas”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR69, unpublished.
- N. Stapley and W. Sliwinski, “Applying Agile Project Management for Accelerator Controls Software”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB05, pp. 612-614.
- A. Kosrmlj, R. Sabjan, I. Verstovsek, K. Zagar, and G. Pajor, “Systematic Production of Beamline and Other Turnkey Control Systems”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB14, pp. 632-634.
- M. Buttner, J. Lauener, K. Sigerud, M. Sobczak, N. Stapley, and P. Charrue, “The DIAMON Project -- Monitoring and Diagnostics for the CERN Controls Infrastructure”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA35, pp. 588-590.
- W. H. Park et al., “A DC/DC Converter Test Board and Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP537, pp. XX-XX.
- G.-T. Park et al., “Status Update of a Harmonic Kicker Development for JLEIC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3047-3050.
- F. Ravotti et al., “The IRRAD Proton Irradiation Facility Data Management, Analytics, Control and Beam Diagnostic systems: current performance and outlook beyond the CERN LS3”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 356-362.
Back to search