[n] C. Chang et al., “First Results of Energy Measurements with a Compact Compton Backscattering Setup at ANKA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 876-878. doi:10.18429/JACoW-IPAC2015-MOPHA040
[n] N. N. Alexeev et al., “Investigation of the Nonlinear Transformation of an Ion Beam in the Plasma Lens”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC074, pp. 2190-2192.
[n] G. Turemen et al., “Manufacturing and the LLRF Tests of the SANAEM RFQ”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 964-967. doi:10.18429/JACoW-IPAC2016-MOPOY051
[n] F. Zakerhosseini, H. Afarideh, S. Sabounchi, J.-S. Chai, and M. Ghergherehchi, “Heat Transfer Study of PIG Ion Source for 10 MeV Cyclotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1256-1258. doi:10.18429/JACoW-IPAC2016-TUPMR013
[n] T. Natsui, Y. Ogawa, M. Yoshida, and X. Zhou, “Quasi-traveling Wave Side Couple RF Gun Commissioning for SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 667-669. doi:10.18429/JACoW-IPAC2014-MOPRI033
[n] G. S. Zanyan, V. Sahakyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Storage Ring Design for CANDLE project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 188-190. doi:10.18429/JACoW-IPAC2014-MOPRO047
[n] F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
[n] S. S. Bulanov, E. Esarey, Q. Ji, W. Leemans, T. Schenkel, and S. Steinke, “Advanced Acceleration Mechanisms for Laser Driven Ions by PW-lasers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2082-2084. doi:10.18429/JACoW-IPAC2016-WEOAB01
[n] S. Ahmadian, F. AbbasiDavani, F. Ghasemi, and M. Shafiee, “A Design of Thermionic Electron Gun for Traveling Wave Electron-linac in order to Inject Beam into Booster Synchrotron Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC066, pp. 286-288.
[n] S. Artikova, F. Naito, and M. Yoshida, “The Accelerator Design of Muon g-2 Experiment at J-PARC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI003, pp. 1334-1336.
[n] V. Andreev, N. N. Alexeev, A. I. Balabin, M. M. Kats, and A. A. Metreveli, “Upgrade of Heavy Ion Injector for ITEP-TWAC Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3283-3285. doi:10.18429/JACoW-IPAC2014-THPME029
[n] R. A. Marsh, S. G. Anderson, C. P. J. Barty, D. J. Gibson, and F. V. Hartemann, “Modeling Multi-bunch X-band Photoinjector Challenges”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP042, pp. 658-660.
[n] W. X. Zhou et al., “The Remote Control System for LAPECR1”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA022, pp. 3192-3194.
[n] Z. G. Yin et al., “Design and Commissioning of the RF System of CYCIAE 14 Cyclotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI026, pp. 2759-2761.
[n] S. Marsching et al., “Commissioning of a New Beam-position Monitoring System at ANKA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR021, pp. 825-827.
[n] V. G. Ziemann and L. Hermansson, “Tracking the Helium Balance in FREIA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1202-1204. doi:10.18429/JACoW-IPAC2016-TUPMB047
[n] D. Kleiven, B. Auchmann, V. Raginel, R. Schmidt, A. P. Verweij, and D. Wollmann, “Experimental Setup to Measure the Damage Limits of Superconducting Magnets due to Beam Impact at CERN's HiRadMat Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4200-4202. doi:10.18429/JACoW-IPAC2016-THPOY044
[n] N. Hayashi, S. Hatakeyama, and K. Yamamoto, “Pulse Based Data Archive System and Analysis for Current and Beam Loss Monitors in the J-PARC RCS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3800-3802. doi:10.18429/JACoW-IPAC2014-THPRI016
[n] S. Kato, M. Kinsho, K. Yamamoto, and M. Yoshimoto, “Development of Transportation System for Low Energy Electron Group”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD073, pp. 532-534.
[n] H. Takahashi, T. Kojima, T. Narita, K. Nishiyama, H. Sakaki, and K. Tsutsumi, “Development Status of PPS, MPS and TS for IFMIF/EVEDA Prototype Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS084, pp. 1734-1736.
[n] H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019.
[n] M. Kokole, B. Diviacco, T. Milharcic, M. Zambelli, G. Soregaroli, and M. Tedeschi, “Magnetic Characterization of FEL-2 Undulators for the FERMI@Elettra Free-electron Laser”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC170, pp. 3296-3298.
[n] H. Kaji et al., “Construction and Commissioning of Event Timing System at SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1829-1832. doi:10.18429/JACoW-IPAC2014-TUPRI109
[n] R. Bartolini, R. T. Fielder, G. Rehm, and V. V. Smaluk, “Analysis of Multi-bunch Instabilities at the Diamond Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1685-1687. doi:10.18429/JACoW-IPAC2016-TUPOR013
[n] D. V. Senkov, A. M. Batrakov, A. D. Chernyakin, V. A. Kiselev, A. V. Pavlenko, and A. N. Zhuravlev, “Pulse Generators for Septums and Bumps of Injection and Extraction Systems of NSLS-II Booster”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA029, pp. 726-728.
[n] A. Kuramoto and H. Hayano, “Alignment Detection Study using Beam Induced HOM at STF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME019, pp. 509-511.
[n] H. S. Kim, Y.-S. Cho, H.-J. Kwon, and S. P. Yun, “Beam Test of the New Beamline for Radio-Isotope Production at KOMAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1349-1351. doi:10.18429/JACoW-IPAC2016-TUPMR044
[n] F. Schlander, K. Aulenbacher, R. G. Heine, D. Simon, and T. Stengler, “1.3 GHz SRF Cryomodules for the Mainz Energy-recovering Superconducting Accelerator MESA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2853-2855. doi:10.18429/JACoW-IPAC2015-WEPMA041
Use Complete Form