Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Burke, M. Jenkins, J. Ollier, and M. Procter, “Container stripping: enhanced classification of materials within cargo containers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3681-3683. doi:10.18429/JACoW-IPAC2024-THPR71
[n] S. Chen, R. B. Hogan, A. Michalczyk, A. C. Starritt, and Y. E. Tan, “Hardware and Firmware Development for Enhanced Orbit Diagnostics at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3802-3804. doi:10.18429/JACoW-IPAC2019-THPRB004
[n] J. De Chant et al., “Transport and dosimetry of laser-driven proton beams for radiobiology at the BELLA center”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 610-613. doi:10.18429/JACoW-IPAC2024-MOPR72
[n] J. C. Cornell, D. T. Fourie, and G. C. W. Lloyd, “A Neutron Beam Facility at NAC”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-08, pp. 594-597.
[n] J. Kamiya, Y. Hikichi, M. Kinsho, A. Miura, and N. Ogiwara, “Non-Distructive 2-D Beam Profile Monitor Using Gas Sheet in J-PARC LINAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2177-2179. doi:10.18429/JACoW-IPAC2018-WEPAL014
[n] I. A. Aguilar et al., “Commissioning TRIUMF'S 2C Solid Target Facility Controls”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA27, pp. 371-373.
[n] J. Dwivedi et al., “Restoration of RF Cavity for Synchrotron Storage Ring INDUS-1”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16003B, pp. XX-XX.
[n] T. Yan, “Computation of Nonlinear One-Turn Maps from Measurement with Model-Independent Analysis”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL4, pp. 363-365.
[n] R. B. Wehrle, J. H. Norem, W. F. Praeg, R. H. Swanstrom, and K. M. Thompson, “Prototype Sector Magnets for the GeV Electron Microtron (GEM)”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2859-2862.
[n] M. A. Paciotti, J. N. Bradbury, R. H. Heffner, M. Leon, D. Rink, and O. M. Rivera, “Muon Beam Polarization at the LAMPF Biomedical Channel”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3338-3341.
[n] R. C. Wolgast and J. W. Davis, “Tests of a Fail-Safe Vacuum Beam Line Using Acoustic Delay and a Fast Closing Valve”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 954-956.
[n] S. L. Shope et al., “RADLAC II/SMILE Performance with a Magnetically Insulated Voltage Adder”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3129-3132.
[n] S. Y. Lee, K. M. Fung, and K. Y. Ng, “Feasibility Study of Storage Ring Based High Gain FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH112, pp. 2730-2732.
[n] M. Madert, “Status of the High Current Injector Project”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP38, pp. 743-745.
[n] S. Machida, Y. Mori, and R. Ueno, “Beam Optics Design of an FFAG Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B20, pp. 557-559.
[n] S. H. Moon and M. Chung, “High-Intensity Beam Dynamics Simulation of the IFMIF-like Accelerators”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 373-376. doi:10.18429/JACoW-HB2018-THP2WB02
[n] D. Perez, R. Shinohara, S. Bagchi, C. Huang, E. Simakov, and G. Wang, “Multiscale material design of robust semiconductor photocathodes under strong fields”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA017, unpublished.
[n] P. Lotrus and G. A. Durand, “Saclay GBAR Command Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC040, pp. 650-653.
[n] Y. Honda et al., “Demonstration of Multi-Pulse X-ray Generation via Laser-Compton Scattering Using Pulsed-Laser Super-Cavity”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP065, pp. 545-547.
[n] B. Epsztein and J. P. Mangin, “Transients in Electron Linacs”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-07, pp. 332-336.
[n] M. Mouat, E. Klassen, K. S. Lee, J. J. Pon, and P. J. Yogendran, “Update On The Central Control System of TRIUMF's 500 MeV Cyclotron”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU018, pp. 469-472.
[n] T. H. Luo et al., “Final Assembly and Testing of MICE RF Modules at LBNL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4377-4379. doi:10.18429/JACoW-IPAC2017-THPIK118
[n] R. E. Pollock, D. L. Friesel, and D. W. Devins, “A Design Study for Split Beam Operation of the Indiana University Cyclotron Facility”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 393-399.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Burke, M. Jenkins, J. Ollier, and M. Procter, “Container stripping: enhanced classification of materials within cargo containers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR71, pp. 3681-3683.
- S. Chen, R. B. Hogan, A. Michalczyk, A. C. Starritt, and Y. E. Tan, “Hardware and Firmware Development for Enhanced Orbit Diagnostics at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3802-3804.
- J. De Chant et al., “Transport and dosimetry of laser-driven proton beams for radiobiology at the BELLA center”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR72, pp. 610-613.
- J. C. Cornell, D. T. Fourie, and G. C. W. Lloyd, “A Neutron Beam Facility at NAC”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-08, pp. 594-597.
- J. Kamiya, Y. Hikichi, M. Kinsho, A. Miura, and N. Ogiwara, “Non-Distructive 2-D Beam Profile Monitor Using Gas Sheet in J-PARC LINAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2177-2179.
- I. A. Aguilar et al., “Commissioning TRIUMF'S 2C Solid Target Facility Controls”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA27, pp. 371-373.
- J. Dwivedi et al., “Restoration of RF Cavity for Synchrotron Storage Ring INDUS-1”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16003B, pp. XX-XX.
- T. Yan, “Computation of Nonlinear One-Turn Maps from Measurement with Model-Independent Analysis”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDL4, pp. 363-365.
- R. B. Wehrle, J. H. Norem, W. F. Praeg, R. H. Swanstrom, and K. M. Thompson, “Prototype Sector Magnets for the GeV Electron Microtron (GEM)”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2859-2862.
- M. A. Paciotti, J. N. Bradbury, R. H. Heffner, M. Leon, D. Rink, and O. M. Rivera, “Muon Beam Polarization at the LAMPF Biomedical Channel”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3338-3341.
- R. C. Wolgast and J. W. Davis, “Tests of a Fail-Safe Vacuum Beam Line Using Acoustic Delay and a Fast Closing Valve”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 954-956.
- S. L. Shope et al., “RADLAC II/SMILE Performance with a Magnetically Insulated Voltage Adder”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3129-3132.
- S. Y. Lee, K. M. Fung, and K. Y. Ng, “Feasibility Study of Storage Ring Based High Gain FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH112, pp. 2730-2732.
- M. Madert, “Status of the High Current Injector Project”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP38, pp. 743-745.
- S. Machida, Y. Mori, and R. Ueno, “Beam Optics Design of an FFAG Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B20, pp. 557-559.
- S. H. Moon and M. Chung, “High-Intensity Beam Dynamics Simulation of the IFMIF-like Accelerators”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 373-376.
- D. Perez, R. Shinohara, S. Bagchi, C. Huang, E. Simakov, and G. Wang, “Multiscale material design of robust semiconductor photocathodes under strong fields”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA017, unpublished.
- P. Lotrus and G. A. Durand, “Saclay GBAR Command Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC040, pp. 650-653.
- Y. Honda et al., “Demonstration of Multi-Pulse X-ray Generation via Laser-Compton Scattering Using Pulsed-Laser Super-Cavity”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP065, pp. 545-547.
- B. Epsztein and J. P. Mangin, “Transients in Electron Linacs”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VI-07, pp. 332-336.
- M. Mouat, E. Klassen, K. S. Lee, J. J. Pon, and P. J. Yogendran, “Update On The Central Control System of TRIUMF's 500 MeV Cyclotron”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU018, pp. 469-472.
- T. H. Luo et al., “Final Assembly and Testing of MICE RF Modules at LBNL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4377-4379.
- R. E. Pollock, D. L. Friesel, and D. W. Devins, “A Design Study for Split Beam Operation of the Indiana University Cyclotron Facility”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 393-399.
Back to search