Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Angal-Kalinin et al., “Commissioning of the Indus-1 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B01, pp. 687-689.
[n] J. Beebe-Wang, M. Blaskiewicz, J. D. Galambos, J. Holmes, A. Luccio, and D. Olsen, “Beam Dynamics Simulation Code for the Oak Ridge Spallation Neutron Source Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP01C, pp. 1210-1212.
[n] D. Trbojevic and E. Courant, “Low Emittance Lattices for Electron Storage Rings Revisited”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1000-1003.
[n] T. L. Lavine et al., “SLC Polarized Beam Source Ultra-high-vacuum Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2284-2286.
[n] H. Guler et al., “Power Coupler Design for the LUCRECE Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3732-3735. doi:10.18429/JACoW-IPAC2018-THPAL041
[n] K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
[n] K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 809-814.
[n] N. T. Callaway, R. W. Garnett, K. W. Jones, M. A. Oothoudt, and B. D. Ray, “Availability Results for the LANSCE Accelerator Complex”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W023, pp. 1165-1167.
[n] A. Glazov et al., “20 MeV Cyclotron for Isotope Production”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper II-04, pp. 123-125.
[n] R. L. Poirier, T. Enegren, and C. Haddock, “Perpendicular Biased Ferrite Tuned RF Cavity for the TRIUMF KAON Factory Booster Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 171-174.
[n] E. Bravin, B. Dehning, and G. Mugnai, “Energy Calibration at LEP using Nuclear Magnetic Resonance Probes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05H, pp. 388-390.
[n] R. Banwari et al., “300 kV/ 6 kW Power Supply System for Self-shielded Low Energy DC Accelerator at RRCAT Indore”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA039, pp. 679-681.
[n] K. L. F. Bane et al., “Impedance and Single Bunch Instability Calculations for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS061, pp. 4141-4143.
[n] T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
[n] J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 758-761. doi:10.18429/JACoW-NAPAC2016-WEPOA30
[n] S. A. Kahn, H. Guler, C. Lu, K. T. McDonald, E. J. Prebys, and S. E. Vahsen, “The Instrumentation Channel for the MUCOOL Experiment”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP33, pp. 3026-3028.
[n] E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE120, pp. 2337-2339.
[n] A. V. Zlobin, V. V. Kashikhin, and J. B. Strait, “Aperture Limitations for 2nd Generation Nb3Sn LHC IR Quadrupoles”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE018, pp. 1975-1977.
[n] H.-D. Nuhn et al., “A 2-4 nm Linac Coherent Light Source (LCLS) Using the SLAC Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1445-1448.
[n] N. Delerue et al., “The Synchronization System of the Thomx Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2243-2246. doi:10.18429/JACoW-IPAC2018-WEPAL035
[n] S. J. Park et al., “Design of BPM PU for Low-Beta Proton Beam Using Magic Code”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT14, pp. XX-XX.
[n] J. E. Allinger et al., “Tests of a 3 Meter Curved Superconducting Beam Transport Dipole Magnet”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3231-3234.
[n] J. A. Holmes, V. Danilov, J. D. Galambos, A. V. Fedotov, and R. L. Gluckstern, “Resonant Beam Response in the PSR Accumulator Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH305, pp. 3188-3190.
[n] A. J. Kimber, J. W. Gray, and A. Morris, “Redesign of the ISIS Main Magnet Power Supply Storage Choke”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT140, pp. 1455-1457.
[n] A. Harvey, “Mineral-Insulated Conductors for Magnet Coils”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper G-6, pp. 707-718.
[n] G. S?®n?®cal et al., “GANIL High Intensity Transport Safety System”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-04, pp. 291-293.
[n] B. H. Choi, K. S. Kim, Y. S. Cho, J. M. Han, W. S. Song, and Y. J. Kim, “A 3.0MeV KOMAC/KTF RFQ Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD01, pp. 542-544.
[n] G. F. Dell and G. Parzen, “Tracking Studies on the Effects of Magnet Multipoles on the Aperture of the RHIC Heavy Ion Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1620-1623.
[n] J. M. Brennan et al., “Commissioning the New High Power RF System for the AGS with High Intensity Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1897-1900.
[n] D. Walters, J. Noonan, J. Gagliano, G. Harris, and V. Svirtun, “An Ancillary Pumping System for the APS Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P001, pp. 3580-3582.
[n] S. Sierra, C. Lievin, P. Rouillon, H. Guler, W. Kaabi, and A. Verguet, “Automatic RF Conditioning Test Bench of Fundamental Power Couplers for the European XFEL Accelerator”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB095, pp. 1367-1369.
[n] R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 145-148. doi:10.18429/JACoW-ICALEPCS2015-MOPGF025
[n] J. P. S. Martins, S. Farina, J. H. Lee, and D. P. Piso, “MicroTCA.4 Integration at ESS: From the Front-End Electronics to the EPICS OPI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1692-1694. doi:10.18429/JACoW-ICALEPCS2017-THPHA133
[n] P. Gras, W. Funk, L. Gross, D. Vintache, and F. Drouhin, “Front-End Electronics Configuration System for CMS”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEDT005, pp. XX-XX.
[n] V. Bharadwaj et al., “Computer Controls Programming for Deceleration Beam in the Fermilab Antiproton Accumulator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 964-967.
[n] K. Bane, A. Chao, and T. Weiland, “A Simple Model for the Energy Loss of a Bunched Beam Traversing a Cavity”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2605-2608.
[n] J. Tuozzolo, J. Brodowski, G. Danby, J. Jackson, and W. Meng, “Magnets for the National Spallation Neutron Source Accumulator Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P003, pp. 3233-3235.
[n] R. S. Larsen et al., “The ILC Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAA01, pp. 271-275.
[n] J. T. Maniscalco, P. N. Koufalis, and M. Liepe, “Modeling of the Frequency and Field Dependence of the Surface Resistance of Impurity-Doped Niobium”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2471-2474. doi:10.18429/JACoW-IPAC2018-WEPMF046
[n] A. Febel, H. Gerke, M. Tigner, H. Wiedemann, and B. H. Wilk, “The Proposed Desy Proton-Electron Colliding Beam Experiment”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 782-786.
[n] G. T. Danby, J. W. Jackson, and S. T. Lin, “hree Dimensional Properties of Magnetic Beam Transport Elements”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 442-450.
[n] K. Halbach et al., “A Permanent Magnet Undulator for SPEAR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3136-3139.
[n] J. Klabunde, P. Sp?ñdtke, A. A. Kolomiets, and S. G. Yaramishev, “Beam Dynamics Simulation in a Four-Rod RFQ”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-08, pp. 710-712.
[n] W. C. Turner et al., “Reduction of Beam Corkscrew Motion on the Eta-II Linear Induction Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU447, pp. 435-437.
[n] T. Garvey, M. Omeich, M. Jablonka, J. M. Joly, and H. Long, “Simulations and Measurements of the TTF Phase-1 Injector Gun”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA14, pp. 935-937.
[n] E. Plouviez and F. Uberto, “A Fast Local Feedback System to Correct the Beam Position Deviation in the ESRF Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP029L, pp. 1872-1874.
[n] F. Krienen and J. A. MacLachlan, “Antriproton Collection from a Production Target”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2711-2717.
[n] D. Shu et al., “Mechanical Design of a Diamond Crystal Hard X-Ray Self-Seeding Monochromator for PAL-XFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3782-3785. doi:10.18429/JACoW-IPAC2019-THPGW089
[n] E.-C. Huang, P. Anisimov, and L. Rybarcyk, “Benchmarking HPSim with the LANSCE Linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2480-2482. doi:10.18429/JACoW-IPAC2023-TUPM112
For LaTeX
Use Complete Form
For BibTeX
References
- D. Angal-Kalinin et al., “Commissioning of the Indus-1 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B01, pp. 687-689.
- J. Beebe-Wang, M. Blaskiewicz, J. D. Galambos, J. Holmes, A. Luccio, and D. Olsen, “Beam Dynamics Simulation Code for the Oak Ridge Spallation Neutron Source Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP01C, pp. 1210-1212.
- D. Trbojevic and E. Courant, “Low Emittance Lattices for Electron Storage Rings Revisited”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1000-1003.
- T. L. Lavine et al., “SLC Polarized Beam Source Ultra-high-vacuum Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2284-2286.
- H. Guler et al., “Power Coupler Design for the LUCRECE Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3732-3735.
- K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
- K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 809-814.
- N. T. Callaway, R. W. Garnett, K. W. Jones, M. A. Oothoudt, and B. D. Ray, “Availability Results for the LANSCE Accelerator Complex”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W023, pp. 1165-1167.
- A. Glazov et al., “20 MeV Cyclotron for Isotope Production”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper II-04, pp. 123-125.
- R. L. Poirier, T. Enegren, and C. Haddock, “Perpendicular Biased Ferrite Tuned RF Cavity for the TRIUMF KAON Factory Booster Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 171-174.
- E. Bravin, B. Dehning, and G. Mugnai, “Energy Calibration at LEP using Nuclear Magnetic Resonance Probes”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP05H, pp. 388-390.
- R. Banwari et al., “300 kV/ 6 kW Power Supply System for Self-shielded Low Energy DC Accelerator at RRCAT Indore”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA039, pp. 679-681.
- K. L. F. Bane et al., “Impedance and Single Bunch Instability Calculations for the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS061, pp. 4141-4143.
- T. Bertuccio, K. Komisarcik, H. O. Meyer, W. Manwaring, and W. Smith, “IUCF Liquid Hydrogen Target System”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J46, pp. 486-488.
- J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 758-761.
- S. A. Kahn, H. Guler, C. Lu, K. T. McDonald, E. J. Prebys, and S. E. Vahsen, “The Instrumentation Channel for the MUCOOL Experiment”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP33, pp. 3026-3028.
- E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE120, pp. 2337-2339.
- A. V. Zlobin, V. V. Kashikhin, and J. B. Strait, “Aperture Limitations for 2nd Generation Nb3Sn LHC IR Quadrupoles”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE018, pp. 1975-1977.
- H.-D. Nuhn et al., “A 2-4 nm Linac Coherent Light Source (LCLS) Using the SLAC Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1445-1448.
- N. Delerue et al., “The Synchronization System of the Thomx Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2243-2246.
- S. J. Park et al., “Design of BPM PU for Low-Beta Proton Beam Using Magic Code”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT14, pp. XX-XX.
- J. E. Allinger et al., “Tests of a 3 Meter Curved Superconducting Beam Transport Dipole Magnet”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3231-3234.
- J. A. Holmes, V. Danilov, J. D. Galambos, A. V. Fedotov, and R. L. Gluckstern, “Resonant Beam Response in the PSR Accumulator Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH305, pp. 3188-3190.
- A. J. Kimber, J. W. Gray, and A. Morris, “Redesign of the ISIS Main Magnet Power Supply Storage Choke”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT140, pp. 1455-1457.
- A. Harvey, “Mineral-Insulated Conductors for Magnet Coils”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper G-6, pp. 707-718.
- G. S?®n?®cal et al., “GANIL High Intensity Transport Safety System”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-04, pp. 291-293.
- B. H. Choi, K. S. Kim, Y. S. Cho, J. M. Han, W. S. Song, and Y. J. Kim, “A 3.0MeV KOMAC/KTF RFQ Linac”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUD01, pp. 542-544.
- G. F. Dell and G. Parzen, “Tracking Studies on the Effects of Magnet Multipoles on the Aperture of the RHIC Heavy Ion Collider”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1620-1623.
- J. M. Brennan et al., “Commissioning the New High Power RF System for the AGS with High Intensity Beam”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1897-1900.
- D. Walters, J. Noonan, J. Gagliano, G. Harris, and V. Svirtun, “An Ancillary Pumping System for the APS Vacuum System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P001, pp. 3580-3582.
- S. Sierra, C. Lievin, P. Rouillon, H. Guler, W. Kaabi, and A. Verguet, “Automatic RF Conditioning Test Bench of Fundamental Power Couplers for the European XFEL Accelerator”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB095, pp. 1367-1369.
- R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 145-148.
- J. P. S. Martins, S. Farina, J. H. Lee, and D. P. Piso, “MicroTCA.4 Integration at ESS: From the Front-End Electronics to the EPICS OPI”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1692-1694.
- P. Gras, W. Funk, L. Gross, D. Vintache, and F. Drouhin, “Front-End Electronics Configuration System for CMS”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEDT005, pp. XX-XX.
- V. Bharadwaj et al., “Computer Controls Programming for Deceleration Beam in the Fermilab Antiproton Accumulator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 964-967.
- K. Bane, A. Chao, and T. Weiland, “A Simple Model for the Energy Loss of a Bunched Beam Traversing a Cavity”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2605-2608.
- J. Tuozzolo, J. Brodowski, G. Danby, J. Jackson, and W. Meng, “Magnets for the National Spallation Neutron Source Accumulator Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P003, pp. 3233-3235.
- R. S. Larsen et al., “The ILC Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOAA01, pp. 271-275.
- J. T. Maniscalco, P. N. Koufalis, and M. Liepe, “Modeling of the Frequency and Field Dependence of the Surface Resistance of Impurity-Doped Niobium”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2471-2474.
- A. Febel, H. Gerke, M. Tigner, H. Wiedemann, and B. H. Wilk, “The Proposed Desy Proton-Electron Colliding Beam Experiment”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 782-786.
- G. T. Danby, J. W. Jackson, and S. T. Lin, “hree Dimensional Properties of Magnetic Beam Transport Elements”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 442-450.
- K. Halbach et al., “A Permanent Magnet Undulator for SPEAR”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3136-3139.
- J. Klabunde, P. Sp?ñdtke, A. A. Kolomiets, and S. G. Yaramishev, “Beam Dynamics Simulation in a Four-Rod RFQ”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-08, pp. 710-712.
- W. C. Turner et al., “Reduction of Beam Corkscrew Motion on the Eta-II Linear Induction Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU447, pp. 435-437.
- T. Garvey, M. Omeich, M. Jablonka, J. M. Joly, and H. Long, “Simulations and Measurements of the TTF Phase-1 Injector Gun”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA14, pp. 935-937.
- E. Plouviez and F. Uberto, “A Fast Local Feedback System to Correct the Beam Position Deviation in the ESRF Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP029L, pp. 1872-1874.
- F. Krienen and J. A. MacLachlan, “Antriproton Collection from a Production Target”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2711-2717.
- D. Shu et al., “Mechanical Design of a Diamond Crystal Hard X-Ray Self-Seeding Monochromator for PAL-XFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3782-3785.
- E.-C. Huang, P. Anisimov, and L. Rybarcyk, “Benchmarking HPSim with the LANSCE Linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM112, pp. 2480-2482.
Back to search