Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. A. Lundy et al., “High-Gradient Superconducting Quadrupoles”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3707-3710.
[n] K. Hatanaka et al., “Developments of HTS Magnets at RCNP”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPSH011, pp. 242-244.
[n] S.-J. Huang and Y.-T. Hsieh, “Development of a global tune geedback system for beam stability at the Taiwan Light Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB107, unpublished.
[n] W. H. McNeill and R. G. Little, “Effect of Acceleration and Drift Region Configuration upon the Propagation of Intense Electron Beams”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 499-501.
[n] A. Sublet et al., “Thin Film Coating Optimization for HIE-ISOLDE SRF Cavities: Coating Parameters Study and Film Characterization”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP077, pp. 623-626.
[n] S. M. Lidia and K. Murphy, “Error Analysis for Pepperpot Emittance Measurements Redux: Correlated Phase Spaces”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF17, pp. 579-583.
[n] J. S. Moenich and J. J. Peerson, “Pressure Differential Gate Valve”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 130-131.
[n] K. Kaspar and H. G. K?Ânig, “Development of the Fast Feedback System for the GSI SIS Cavities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A08, pp. 1841-1843.
[n] S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA002, pp. 6-9.
[n] A. Goto et al., “Injector AVF Cyclotron at RIKEN”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper B-07, pp. 51-54.
[n] R. Frankel, “Variable Mode Solid State Magnet Cycle Timer”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 427-430.
[n] M. Steinhorst et al., “Low Level RF ERL Experience at the S-DALINAC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 52-55. doi:10.18429/JACoW-ERL2019-TUCOZBS05
[n] F. H. G. Lothrop, “The Chromonitor, A Colorful Dynamic Graphic Display Terminal”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 558-561.
[n] T. Yorita et al., “Developments of Ion Sources, LEBT and Injection Systems for Cyclotrons at RCNP”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 190-192. doi:10.18429/JACoW-Cyclotrons2016-TUP11
[n] D. A. Alesini et al., “The SPARX Project : R&D Activity towards X-rays FEL Sources”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS11, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- R. A. Lundy et al., “High-Gradient Superconducting Quadrupoles”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3707-3710.
- K. Hatanaka et al., “Developments of HTS Magnets at RCNP”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPSH011, pp. 242-244.
- S.-J. Huang and Y.-T. Hsieh, “Development of a global tune geedback system for beam stability at the Taiwan Light Source”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB107, this conference.
- W. H. McNeill and R. G. Little, “Effect of Acceleration and Drift Region Configuration upon the Propagation of Intense Electron Beams”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 499-501.
- A. Sublet et al., “Thin Film Coating Optimization for HIE-ISOLDE SRF Cavities: Coating Parameters Study and Film Characterization”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP077, pp. 623-626.
- S. M. Lidia and K. Murphy, “Error Analysis for Pepperpot Emittance Measurements Redux: Correlated Phase Spaces”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF17, pp. 579-583.
- J. S. Moenich and J. J. Peerson, “Pressure Differential Gate Valve”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 130-131.
- K. Kaspar and H. G. K?Ânig, “Development of the Fast Feedback System for the GSI SIS Cavities”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A08, pp. 1841-1843.
- S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA002, pp. 6-9.
- A. Goto et al., “Injector AVF Cyclotron at RIKEN”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper B-07, pp. 51-54.
- R. Frankel, “Variable Mode Solid State Magnet Cycle Timer”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 427-430.
- M. Steinhorst et al., “Low Level RF ERL Experience at the S-DALINAC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 52-55.
- F. H. G. Lothrop, “The Chromonitor, A Colorful Dynamic Graphic Display Terminal”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 558-561.
- T. Yorita et al., “Developments of Ion Sources, LEBT and Injection Systems for Cyclotrons at RCNP”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 190-192.
- D. A. Alesini et al., “The SPARX Project : R&D Activity towards X-rays FEL Sources”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS11, pp. XX-XX.
Back to search