Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Assmann, J. B. Jeanneret, and D. Kaltchev, “STATUS OF ROBUSTNESS STUDIES FOR THE LHC COLLIMATION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEAU05, pp. XX-XX.
[n] D. Kaltchev, “Two-Dimensional Beam-Beam Invariant with Applications to HL-LHC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3301-3304. doi:10.18429/JACoW-IPAC2021-WEPAB280
[n] J. C. Sheppard, R. C. York, B. E. Norum, and J. S. McCarthy, “Design of an Electron Beam Spectral Modification System”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H04, pp. 266-269.
[n] P. Brunelle and A. Nadji, “Performances of the SOLEIL Lattice in the Presence of Errors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP11G, pp. 882-884.
[n] M. Tischer et al., “Status of the PETRA III Damping Wigglers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS121, pp. 3565-3567.
[n] M. Bergamaschi et al., “Feasibility Study of ChDR Diagnostic Device in the LHC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2139-2142. doi:10.18429/JACoW-IPAC2021-TUPAB283
[n] S. H. Kim et al., “Development of L-band Electron Accelerator for Irradiation Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA127, pp. 821-823.
[n] M. A. Plum et al., “SNS Ring Commissioning Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH131, pp. 351-353.
[n] E. Bravin et al., “Wire Grid and Wire Scanner Monitors Design for the CERN LINAC 4”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP101, pp. 650-652.
[n] A. Suraci et al., “Instrumentation, Field Network and Process Automation for the Cryogenic System of the LHC Test String”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP065, pp. XX-XX.
[n] L. Nielsen, N. Bourcey, V. Parma, P. Rohmig, J.-B. Bergot, and E. Roy, “Thermal Performance of the LHC Short Straight Section Cryostat”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE024, pp. 2526-2528.
[n] H. Tian, M. Kelley, C. Reece, L. Plucinski, K. Smith, and S. Wang, “Surface Studies of Niobium Chemically Polished Under Conditions for SRF Cavity Production”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA10, pp. 193-193.
[n] J. M. Jowett, W. Kalbreier, and S. Myers, “Preparations for High-Luminosity LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 403-406.
[n] E. Plouviez and N. Michel, “Cleaning of Parastic Bunches in the ESRF Booster Synchrotron for Time Structure Modes of Operation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF032, pp. 2341-2343.
[n] A. Hamdi, M. Luong, and M. Werner, “VDHL Design and Simulation of a Fast Beam Loss Interlock for TTF2”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT073, pp. 2020-2022.
[n] S. S. Park, Y. J. Han, S. H. Kim, S.-C. Kim, and S.-H. Nam, “Operational Analysis of PLS 2-GeV Electron Linac Klystron-modulator System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF051, pp. 1720-1722.
[n] A. Garonna et al., “Status of the Proton Beam Commissioning at the MedAustron Ion Beam Therapy Centre”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 28-30. doi:10.18429/JACoW-IPAC2015-MOBB1
[n] K. Bertsche and J. Palkovic, “Beam Profile Measurement in the Presence of Noise”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB19, pp. 2572-2573.
[n] E. Cenni et al., “Vertical Test Results on ESS Medium and High Beta Elliptical Cavity Prototypes Equipped with Helium Tank”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 948-950. doi:10.18429/JACoW-IPAC2017-MOPVA041
[n] K. Yokoya, “APS Wilson Award Talk”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THZD1, unpublished.
[n] P. Brunelle et al., “Status of the SOLEIL Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP088G, pp. 670-672.
[n] G. Lambert et al., “Seeding the FEL of the SCSS Phase 1 Facility with the 13th Laser Harmonic of a Ti: Sa Laser (61.5 nm) Produced in Xe Gas”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOOC004, pp. XX-XX.
[n] J. M. Weber et al., “ALS-U Instrumentation Overview”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3427-3429. doi:10.18429/JACoW-IPAC2021-WEPAB321
[n] J. B. Donahue et al., “LANSCE Short-Pulse Spallation Source Target Upgrade”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P013, pp. 190-192.
[n] M. H. Rashid and A. Chakrabarti, “Beam Optical Simulation in a Proposed Magnetic Einzel Lens”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT003, pp. 323-325.
[n] M. Fouaidy et al., “Copper Plasma Sprayed Niobium Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C21, pp. 606-614.
[n] B. Visentin, J.-P. Charrier, Y. Gasser, and S. Regnaud, “Fast Argon-Baking Process for Mass Production of Niobium Superconducting RF Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH141, pp. 381-383.
[n] S.-C. Kim, Y. J. Han, S. H. Kim, S.-H. Nam, and S. S. Park, “Measurement of Fast High Voltage Pulse and High Noisy DC Siganla for Modulator at the PLS Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF050, pp. 1717-1719.
[n] M. G. Ibison, K. M. Hock, D. J. Holder, and M. Korostelev, “Development of Tomographic Reconstruction Methods for Studies of Transverse Phase Space in the EMMA FFAG Injection Line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD031, pp. 4346-4348.
[n] C. Takahashi et al., “Implementation of Model Predictive Control for Slow Orbit Feedback Control in MAX IV Accelerators Using PyTango Framework”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 116-122. doi:10.18429/JACoW-ICALEPCS2023-MO3AO02
[n] R. W. Hamm, D. W. Mueller, and R. G. Sturgess, “A 30-kV Proton Injector for PIGMI”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H17, pp. 309-312.
[n] M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
[n] D. Hopkins, T. Orzechowski, G. Westenskow, D. Yu, and S. Yu, “Phase and Amplitude Stabilization of Short-Pulsed, High-Power Microwave Amplifiers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1335-1338.
[n] H. H. Braun, M. Luong, I. Wilson, and W. Wuensch, “A Very-High-Gradient Test of a 30 GHz Single-Cell Cavity”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUOCF101, pp. 271-273.
[n] E. Plouviez and F. Uberto, “A Fast Local Feedback System to Correct the Beam Position Deviation in the ESRF Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP029L, pp. 1872-1874.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Assmann, J. B. Jeanneret, and D. Kaltchev, “STATUS OF ROBUSTNESS STUDIES FOR THE LHC COLLIMATION”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEAU05, pp. XX-XX.
- D. Kaltchev, “Two-Dimensional Beam-Beam Invariant with Applications to HL-LHC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3301-3304.
- J. C. Sheppard, R. C. York, B. E. Norum, and J. S. McCarthy, “Design of an Electron Beam Spectral Modification System”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H04, pp. 266-269.
- P. Brunelle and A. Nadji, “Performances of the SOLEIL Lattice in the Presence of Errors”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP11G, pp. 882-884.
- M. Tischer et al., “Status of the PETRA III Damping Wigglers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS121, pp. 3565-3567.
- M. Bergamaschi et al., “Feasibility Study of ChDR Diagnostic Device in the LHC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2139-2142.
- S. H. Kim et al., “Development of L-band Electron Accelerator for Irradiation Source”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA127, pp. 821-823.
- M. A. Plum et al., “SNS Ring Commissioning Results”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH131, pp. 351-353.
- E. Bravin et al., “Wire Grid and Wire Scanner Monitors Design for the CERN LINAC 4”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP101, pp. 650-652.
- A. Suraci et al., “Instrumentation, Field Network and Process Automation for the Cryogenic System of the LHC Test String”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP065, pp. XX-XX.
- L. Nielsen, N. Bourcey, V. Parma, P. Rohmig, J.-B. Bergot, and E. Roy, “Thermal Performance of the LHC Short Straight Section Cryostat”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE024, pp. 2526-2528.
- H. Tian, M. Kelley, C. Reece, L. Plucinski, K. Smith, and S. Wang, “Surface Studies of Niobium Chemically Polished Under Conditions for SRF Cavity Production”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA10, pp. 193-193.
- J. M. Jowett, W. Kalbreier, and S. Myers, “Preparations for High-Luminosity LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 403-406.
- E. Plouviez and N. Michel, “Cleaning of Parastic Bunches in the ESRF Booster Synchrotron for Time Structure Modes of Operation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF032, pp. 2341-2343.
- A. Hamdi, M. Luong, and M. Werner, “VDHL Design and Simulation of a Fast Beam Loss Interlock for TTF2”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT073, pp. 2020-2022.
- S. S. Park, Y. J. Han, S. H. Kim, S.-C. Kim, and S.-H. Nam, “Operational Analysis of PLS 2-GeV Electron Linac Klystron-modulator System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF051, pp. 1720-1722.
- A. Garonna et al., “Status of the Proton Beam Commissioning at the MedAustron Ion Beam Therapy Centre”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 28-30.
- K. Bertsche and J. Palkovic, “Beam Profile Measurement in the Presence of Noise”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB19, pp. 2572-2573.
- E. Cenni et al., “Vertical Test Results on ESS Medium and High Beta Elliptical Cavity Prototypes Equipped with Helium Tank”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 948-950.
- K. Yokoya, “APS Wilson Award Talk”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THZD1, unpublished.
- P. Brunelle et al., “Status of the SOLEIL Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP088G, pp. 670-672.
- G. Lambert et al., “Seeding the FEL of the SCSS Phase 1 Facility with the 13th Laser Harmonic of a Ti: Sa Laser (61.5 nm) Produced in Xe Gas”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOOC004, pp. XX-XX.
- J. M. Weber et al., “ALS-U Instrumentation Overview”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3427-3429.
- J. B. Donahue et al., “LANSCE Short-Pulse Spallation Source Target Upgrade”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P013, pp. 190-192.
- M. H. Rashid and A. Chakrabarti, “Beam Optical Simulation in a Proposed Magnetic Einzel Lens”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT003, pp. 323-325.
- M. Fouaidy et al., “Copper Plasma Sprayed Niobium Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C21, pp. 606-614.
- B. Visentin, J.-P. Charrier, Y. Gasser, and S. Regnaud, “Fast Argon-Baking Process for Mass Production of Niobium Superconducting RF Cavities”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH141, pp. 381-383.
- S.-C. Kim, Y. J. Han, S. H. Kim, S.-H. Nam, and S. S. Park, “Measurement of Fast High Voltage Pulse and High Noisy DC Siganla for Modulator at the PLS Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF050, pp. 1717-1719.
- M. G. Ibison, K. M. Hock, D. J. Holder, and M. Korostelev, “Development of Tomographic Reconstruction Methods for Studies of Transverse Phase Space in the EMMA FFAG Injection Line”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD031, pp. 4346-4348.
- C. Takahashi et al., “Implementation of Model Predictive Control for Slow Orbit Feedback Control in MAX IV Accelerators Using PyTango Framework”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO3AO02, pp. 116-122.
- R. W. Hamm, D. W. Mueller, and R. G. Sturgess, “A 30-kV Proton Injector for PIGMI”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H17, pp. 309-312.
- M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
- D. Hopkins, T. Orzechowski, G. Westenskow, D. Yu, and S. Yu, “Phase and Amplitude Stabilization of Short-Pulsed, High-Power Microwave Amplifiers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1335-1338.
- H. H. Braun, M. Luong, I. Wilson, and W. Wuensch, “A Very-High-Gradient Test of a 30 GHz Single-Cell Cavity”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUOCF101, pp. 271-273.
- E. Plouviez and F. Uberto, “A Fast Local Feedback System to Correct the Beam Position Deviation in the ESRF Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP029L, pp. 1872-1874.
Back to search