Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Colling, D. J. Dunning, B. D. Fell, T. H. Pacey, and Y. M. Saveliev, “Mechanical Design of a Dielectric Wakefield Dechirper System for CLARA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1912-1915. doi:10.18429/JACoW-IPAC2019-TUPRB108
[n] V. Gorchenko et al., “Nuclotron Main Magnet Power Supply Control System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02L, pp. 1694-1698.
[n] F. V. Podgorny, B. I. Grishanov, and A. S. Kasaev, “SOS-diode Based Pulser for the Injection System of the Collider VEPP-2000”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT089, pp. 743-745.
[n] L. N. Blumberg, J. B. Murphy, and M. F. Reusch, “Lattice Properties of the Phase I BNL X-Ray Lithography Source Obtained from Fits to Magnetic Measurement Data”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2664-2667.
[n] T. Suzuki, Y. Chin, K. Satoh, K. Takata, and K. Yokoya, “Collective Beam Instabilities Caused by RF Cavities in TRISTAN”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2563-2566.
[n] H. Eickhoff, B. Franczak, U. Krause, C. Riedel, and R. Steiner, “Accelerator Aspects of the Cancer Therapy Project at the GSI Darmstadt”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP052G, pp. 2641-2643.
[n] V. Kobets, A. Govorov, V. Monchinsky, A. V. Butenko, D. E. Donets, and A. O. Sidorin, “Modernization the Modulator of the RF-Generator Ion Linear Accelerator LU-20”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB01, pp. 155-156.
[n] R. Thomas, A. Ghosh, D. McChesney, and A. Jain, “Testing and Evaluation of Superconducting Cables for the LHC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP99, pp. 3188-3190.
[n] M. B?Âge, J. Chrin, P. Pollet, T. Schilcher, and V. Schlott, “Orbit Control at the SLS Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI030, pp. 2067-2069.
[n] J. M. Brennan et al., “Design of Ferrite Loaded High Voltage Barrier Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22G, pp. 1829-1831.
[n] H. E. Ahn, Y. S. Cho, and B. H. Choi, “Partial Beam Extraction Scheme of Negative Hydrogen Ion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA76, pp. 1255-1257.
[n] K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Investigation on Double Dipole Four-Vane RFQ Structure”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA22, pp. 1028-1030.
[n] M. M. Gordon and E. M. Fabrici, “Beam Extraction System for the K=500 Superconducting Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-13, pp. 2101-2106.
[n] J. G. Alessi et al., “Performance of the New AGS RFQ Preinjector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 999-1002.
[n] M. Shafiee, E. Ebrahimi, and S. A. H. Feghhi, “Design of Magnetic BPM and Error Corrections”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD25, pp. 359-361.
[n] M. Hahn and R. Kersevan, “Status of NEG Coating at ESRF”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAD005, pp. 422-424.
[n] B. Goddard et al., “The Effects of LHC Civil Engineering on the SPS and LEP Machines”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP16H, pp. 412-414.
[n] G. Valentino, R. W. Assmann, S. Redaelli, and N. J. Sammut, “LHC Collimator Alignment Operational Tool”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC120, pp. 860-863.
[n] G. Karady and H. A. Thiessen, “Accelerator Magnet Power Supply Using Storage Generator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1416-1419.
[n] W. H. C. Theuws, J. I. M. Botman, and H. L. Hagedoorn, “Continuous Electron-Energy Variation of the Eindhoven Racetrack Microtron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W020, pp. 1036-1038.
[n] K. Satoh, “New Wall Current Beam Position Monitor”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3364-3367.
[n] A. V. Filippas et al., “Optics for the IASA CW RTM”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP046G, pp. 557-559.
[n] B. C. Knapp, E. A. Knapp, G. J. Lucas, D. E. Nagle, and J. M. Potter, “Electrical Behavior of Long Linac Tanks and a New Tank-Coupling Scheme”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 623-627.
[n] J. Gareyte, “Accelerator Physics Issues of the LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper FRY02A, pp. 168-174.
[n] M. Ge, M. Liepe, D. Gonnella, and J. Sears, “Cool Down Studies for the LCLS-II Project”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 470-472. doi:10.18429/JACoW-LINAC2018-TUPO058
[n] H. H. Tsai et al., “The Current Status of the Cryogenic System Design and Construction for TPS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA076, pp. 3846-3848.
[n] A. S. Alimov et al., “Generating High-Brightness Electron Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP19, pp. 2301-2303.
[n] K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Design and Measurement of Double Gap Buncher Cavity Proposed for Reduction of X- ray Radiation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA23, pp. 1031-1033.
[n] C. Bauer, Th. Kr?Âll, J. Leske, N. Pietralla, and J. van de Walle, “REX-ISOLDE Facility and the Importance of Beam Time Structure to Data Acquisition and Processing - the Experimentalist's View”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP119, pp. 5059-5061.
[n] E. A. Knapp, “Design, Construction, and Testing of RF Structures for a Proton Linear Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 118-128.
[n] H. Braun, H. Herminghaus, and A. Streun, “The Gun/Chopper System for the MAINZ Microtron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 997-1000.
[n] V. I. Shvedunov et al., “High-Brightness Racetrack Microtron Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH161, pp. 1601-1603.
[n] J. Norem and Z. Insepov, “Triggers for RF Breakdown”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF050, pp. 1063-1065.
[n] M. Bickley, B. A. Bowling, D. A. Bryan, J. van Zeijts, K. S. White, and S. Witherspoon, “Using Servers to Enhance Control System Capability”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP33, pp. 732-734.
[n] C. Jensen, B. Hanna, and R. Reilly, “A Fast Injection Kicker System for the Tevatron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH025, pp. 3723-3725.
[n] V. Sajaev and L. Emery, “Determination and Correction of the Linear Lattice of the APS Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI001, pp. 742-744.
[n] M. Mu??oz and D. Einfeld, “Optics for the ALBA Lattice”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE069, pp. 3777-3779.
[n] M. Kim and M. Kwon, “LabVIEW-EPICS Interfaces in KSTAR Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP519, pp. XX-XX.
[n] W. H. C. Theuws, “The 75 MeV Racetrack Microtron Eindhoven”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP18, pp. 92-94.
[n] D. Reschke, L. Lilje, and H. Weise, “Analysis of RF Results of Recent Nine-Cell Cavities at DESY”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO051, pp. 342-346.
[n] T. Quast, A. Firsov, K. Holldack, S. Khan, and R. Mitzner, “Upgrade of the BESSY Femtoslicing Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN016, pp. 950-952.
[n] P. Messmer et al., “Particle-in-Cell Simulations of Lower-Density CM-Scale Capillary Channels”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE032, pp. 2248-2250.
[n] R. Campbell, A. Hawkins, W. North, L. Solheim, C. Wolcott, and A. Zolfaghari, “Trigger Control and Fault Reaction Circuitry for the Solid-State Switch Modulator Deck at the MIT-Bates S-Band Transmitter”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP17, pp. 1515-1517.
[n] M. W. Bruker, K. Aulenbacher, J. Dietrich, A. Hofmann, and T. Weilbach, “Secondary Electron Measurements at the HIM Electron Cooler Test Set-Up”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF08, pp. 48-50.
[n] D. L. Bruhwiler, J. R. Cary, D. A. Dimitrov, E. Esarey, and W. P. Leemans, “Simulation of Ionization Effects for High-Density Positron Drivers in Future Plasma Wakefield Experiments”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB012, pp. 734-736.
[n] B. W. Allardyce, R. Hohbach, G. Le Dallic, and F. Nitsch, “The CERN Synchro-Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J33, pp. 442-444.
[n] C. J. Kost, D. A. Dohan, and M. Mouat, “Application of High Level Programs in a Controls Environment”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 719-722.
[n] E. Schneidmiller and M. V. Yurkov, “An Option of Frequency Doubler at the European XFEL for Generation of Circularly Polarized Radiation in the Wavelength Range Down to 1 - 2.5 nm”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPC06, pp. 123-126.
[n] V. Shevtsov, V. Aleksandrov, Y. Jongen, Yu. Kazarinov, and D. Vandeplassche, “Design Study of the Axial Injection System of C400 Cyclotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS119, pp. 1786-1788.
[n] J. H. Park, H. Bluem, J. Rathke, T. Schultheiss, and A. M. M. Todd, “High-Charge Femtosecond Electron Generations for Ultrafast, High-Brightness Electron Beam Applications”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM04, pp. 634-636.
[n] O. Brovko et al., “Conceptual Design of a 240 MeV Superferric Separated Orbit Cyclotron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP4, pp. 2262-2264.
[n] A. Arnold et al., “RF Performance Results of the 2nd ELBE SRF Gun”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB055, pp. 1227-1230.
[n] R. Bossart and W. Scandale, “Measurement of the Betatron Phase Advance and Betatron Amplitude Ratio at the SPPS Collider”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 760-763.
[n] D. Howard et al., “Bevalac Injector Final Stage RF Amplifier Upgrades”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 742-745.
[n] P. Pugnat, F. Rodriguez-Mateos, S. Sanfilippo, R. Schmidt, A. Siemko, and F. Sonnemann, “Quench Heater Experiments on the LHC Main Superconducting Magnets”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A04, pp. 2154-2156.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Colling, D. J. Dunning, B. D. Fell, T. H. Pacey, and Y. M. Saveliev, “Mechanical Design of a Dielectric Wakefield Dechirper System for CLARA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1912-1915.
- V. Gorchenko et al., “Nuclotron Main Magnet Power Supply Control System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02L, pp. 1694-1698.
- F. V. Podgorny, B. I. Grishanov, and A. S. Kasaev, “SOS-diode Based Pulser for the Injection System of the Collider VEPP-2000”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT089, pp. 743-745.
- L. N. Blumberg, J. B. Murphy, and M. F. Reusch, “Lattice Properties of the Phase I BNL X-Ray Lithography Source Obtained from Fits to Magnetic Measurement Data”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2664-2667.
- T. Suzuki, Y. Chin, K. Satoh, K. Takata, and K. Yokoya, “Collective Beam Instabilities Caused by RF Cavities in TRISTAN”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2563-2566.
- H. Eickhoff, B. Franczak, U. Krause, C. Riedel, and R. Steiner, “Accelerator Aspects of the Cancer Therapy Project at the GSI Darmstadt”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP052G, pp. 2641-2643.
- V. Kobets, A. Govorov, V. Monchinsky, A. V. Butenko, D. E. Donets, and A. O. Sidorin, “Modernization the Modulator of the RF-Generator Ion Linear Accelerator LU-20”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB01, pp. 155-156.
- R. Thomas, A. Ghosh, D. McChesney, and A. Jain, “Testing and Evaluation of Superconducting Cables for the LHC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP99, pp. 3188-3190.
- M. B?Âge, J. Chrin, P. Pollet, T. Schilcher, and V. Schlott, “Orbit Control at the SLS Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI030, pp. 2067-2069.
- J. M. Brennan et al., “Design of Ferrite Loaded High Voltage Barrier Cavity”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP22G, pp. 1829-1831.
- H. E. Ahn, Y. S. Cho, and B. H. Choi, “Partial Beam Extraction Scheme of Negative Hydrogen Ion”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA76, pp. 1255-1257.
- K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Investigation on Double Dipole Four-Vane RFQ Structure”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA22, pp. 1028-1030.
- M. M. Gordon and E. M. Fabrici, “Beam Extraction System for the K=500 Superconducting Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-13, pp. 2101-2106.
- J. G. Alessi et al., “Performance of the New AGS RFQ Preinjector”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 999-1002.
- M. Shafiee, E. Ebrahimi, and S. A. H. Feghhi, “Design of Magnetic BPM and Error Corrections”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD25, pp. 359-361.
- M. Hahn and R. Kersevan, “Status of NEG Coating at ESRF”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAD005, pp. 422-424.
- B. Goddard et al., “The Effects of LHC Civil Engineering on the SPS and LEP Machines”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP16H, pp. 412-414.
- G. Valentino, R. W. Assmann, S. Redaelli, and N. J. Sammut, “LHC Collimator Alignment Operational Tool”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC120, pp. 860-863.
- G. Karady and H. A. Thiessen, “Accelerator Magnet Power Supply Using Storage Generator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1416-1419.
- W. H. C. Theuws, J. I. M. Botman, and H. L. Hagedoorn, “Continuous Electron-Energy Variation of the Eindhoven Racetrack Microtron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W020, pp. 1036-1038.
- K. Satoh, “New Wall Current Beam Position Monitor”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3364-3367.
- A. V. Filippas et al., “Optics for the IASA CW RTM”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP046G, pp. 557-559.
- B. C. Knapp, E. A. Knapp, G. J. Lucas, D. E. Nagle, and J. M. Potter, “Electrical Behavior of Long Linac Tanks and a New Tank-Coupling Scheme”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 623-627.
- J. Gareyte, “Accelerator Physics Issues of the LHC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper FRY02A, pp. 168-174.
- M. Ge, M. Liepe, D. Gonnella, and J. Sears, “Cool Down Studies for the LCLS-II Project”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 470-472.
- H. H. Tsai et al., “The Current Status of the Cryogenic System Design and Construction for TPS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA076, pp. 3846-3848.
- A. S. Alimov et al., “Generating High-Brightness Electron Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP19, pp. 2301-2303.
- K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Design and Measurement of Double Gap Buncher Cavity Proposed for Reduction of X- ray Radiation”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA23, pp. 1031-1033.
- C. Bauer, Th. Kr?Âll, J. Leske, N. Pietralla, and J. van de Walle, “REX-ISOLDE Facility and the Importance of Beam Time Structure to Data Acquisition and Processing - the Experimentalist's View”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP119, pp. 5059-5061.
- E. A. Knapp, “Design, Construction, and Testing of RF Structures for a Proton Linear Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 118-128.
- H. Braun, H. Herminghaus, and A. Streun, “The Gun/Chopper System for the MAINZ Microtron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 997-1000.
- V. I. Shvedunov et al., “High-Brightness Racetrack Microtron Injector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH161, pp. 1601-1603.
- J. Norem and Z. Insepov, “Triggers for RF Breakdown”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF050, pp. 1063-1065.
- M. Bickley, B. A. Bowling, D. A. Bryan, J. van Zeijts, K. S. White, and S. Witherspoon, “Using Servers to Enhance Control System Capability”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP33, pp. 732-734.
- C. Jensen, B. Hanna, and R. Reilly, “A Fast Injection Kicker System for the Tevatron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH025, pp. 3723-3725.
- V. Sajaev and L. Emery, “Determination and Correction of the Linear Lattice of the APS Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI001, pp. 742-744.
- M. Mu??oz and D. Einfeld, “Optics for the ALBA Lattice”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE069, pp. 3777-3779.
- M. Kim and M. Kwon, “LabVIEW-EPICS Interfaces in KSTAR Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP519, pp. XX-XX.
- W. H. C. Theuws, “The 75 MeV Racetrack Microtron Eindhoven”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP18, pp. 92-94.
- D. Reschke, L. Lilje, and H. Weise, “Analysis of RF Results of Recent Nine-Cell Cavities at DESY”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO051, pp. 342-346.
- T. Quast, A. Firsov, K. Holldack, S. Khan, and R. Mitzner, “Upgrade of the BESSY Femtoslicing Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN016, pp. 950-952.
- P. Messmer et al., “Particle-in-Cell Simulations of Lower-Density CM-Scale Capillary Channels”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE032, pp. 2248-2250.
- R. Campbell, A. Hawkins, W. North, L. Solheim, C. Wolcott, and A. Zolfaghari, “Trigger Control and Fault Reaction Circuitry for the Solid-State Switch Modulator Deck at the MIT-Bates S-Band Transmitter”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP17, pp. 1515-1517.
- M. W. Bruker, K. Aulenbacher, J. Dietrich, A. Hofmann, and T. Weilbach, “Secondary Electron Measurements at the HIM Electron Cooler Test Set-Up”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF08, pp. 48-50.
- D. L. Bruhwiler, J. R. Cary, D. A. Dimitrov, E. Esarey, and W. P. Leemans, “Simulation of Ionization Effects for High-Density Positron Drivers in Future Plasma Wakefield Experiments”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB012, pp. 734-736.
- B. W. Allardyce, R. Hohbach, G. Le Dallic, and F. Nitsch, “The CERN Synchro-Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J33, pp. 442-444.
- C. J. Kost, D. A. Dohan, and M. Mouat, “Application of High Level Programs in a Controls Environment”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 719-722.
- E. Schneidmiller and M. V. Yurkov, “An Option of Frequency Doubler at the European XFEL for Generation of Circularly Polarized Radiation in the Wavelength Range Down to 1 - 2.5 nm”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPC06, pp. 123-126.
- V. Shevtsov, V. Aleksandrov, Y. Jongen, Yu. Kazarinov, and D. Vandeplassche, “Design Study of the Axial Injection System of C400 Cyclotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS119, pp. 1786-1788.
- J. H. Park, H. Bluem, J. Rathke, T. Schultheiss, and A. M. M. Todd, “High-Charge Femtosecond Electron Generations for Ultrafast, High-Brightness Electron Beam Applications”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM04, pp. 634-636.
- O. Brovko et al., “Conceptual Design of a 240 MeV Superferric Separated Orbit Cyclotron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP4, pp. 2262-2264.
- A. Arnold et al., “RF Performance Results of the 2nd ELBE SRF Gun”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB055, pp. 1227-1230.
- R. Bossart and W. Scandale, “Measurement of the Betatron Phase Advance and Betatron Amplitude Ratio at the SPPS Collider”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 760-763.
- D. Howard et al., “Bevalac Injector Final Stage RF Amplifier Upgrades”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 742-745.
- P. Pugnat, F. Rodriguez-Mateos, S. Sanfilippo, R. Schmidt, A. Siemko, and F. Sonnemann, “Quench Heater Experiments on the LHC Main Superconducting Magnets”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A04, pp. 2154-2156.
Back to search