Favourites
For Word
[n] R. E. Timm, “Control of Ion Sources for the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 613-616.
[n] W. Liu, W.-H. Huang, C.-X. Tang, and D. Wu, “Optimum of Terahertz Smith-Purcell Radiation Generated the Periodical Ultrashort Bunched Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE033, pp. 2215-2217.
[n] E. S. Masunov and A. V. Samoshin, “Using Smooth Approximation for Beam Dynamics Investigation in Superconducting Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN084, pp. 1568-1570.
[n] S. Koscielniak, “Correction of Field Errors in ISAC RFQ”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP133G, pp. 1298-1300.
[n] D. Reggiani, “Extraction, Transport and Collimation of the PSI 1.3 MW Proton Beam”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3A03, pp. 373-377.
[n] K. Yamamoto, N. Hayashi, and M. Kinsho, “Residual Dose with 400 MeV Injection Energy at J-PARC Rapid Cycling Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3379-3381. doi:10.18429/JACoW-IPAC2014-THPME063
[n] S. O. Schriber, “To be pi or not to be pi: That is the Dilemma”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO028, pp. 2280-2282.
[n] V. V. Altsybeyev and D. A. Ovsyannikov, “Optimization of Beam Parameters in APF Channel”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP130, pp. 722-725.
[n] P. R. Sarma, R. K. Bhandari, and S. K. Pattanayak, “Improvement of Field Quality of Glaser Magnets Used for Focusing Ion Beams”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-05, pp. 466-469.
[n] K. Ziegler, “Invited Paper: Running in of VICKSI and First Operating Experience”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-01, pp. 1872-1878.
[n] I. A. Ivanenko, I. V. Kalagin, V. I. Kazacha, and N. Yu. Kazarinov, “Getting Uniform Ion Density on Target in High-Energy Beam Line of Cyclotron U-400M with Two”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT007, pp. 335-337.
[n] G. Bellomo and P. Pierini, “Beam Dynamics in a Proposed 350 MHZ SC Linac for Waste Transmutation and Energy Production”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP01F, pp. 1103-1105.
[n] E. Bargall?â et al., “Value Engineering of an Accelerator Design During Construction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 592-594. doi:10.18429/JACoW-IPAC2017-MOPIK040
[n] F. Sonnemann and F. Rodriguez-Mateos, “Quench Heater Studies for the LHC Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH094, pp. 3451-3453.
[n] E. Marin, A. Latina, F. Plassard, D. Schulte, and R. Tomas, “CLIC Tuning Performance Under Realistic Error Conditions”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2403-2406. doi:10.18429/JACoW-IPAC2017-TUPVA130
[n] K. Hedblom, “Beam Dynamics in Synchrotrons with Two RF Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 965-968.
[n] M. G. Abbott, G. Rehm, and I. S. Uzun, “Architecture of Transverse Multi-Bunch Feedback Processor at Diamond”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 298-301. doi:10.18429/JACoW-ICALEPCS2015-MOPGF097
[n] E. D. Hudson and F. E. McDaniel, “Magnet System for 4- MeV Experimental Separated-Orbit Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 456-460.
[n] M. Billing, N. Mistry, L. Phillips, and D. Thomas, “Some Aspects of the Vacuum System for the Proposed Storage Ring CESR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1370-1373.
[n] J. Shi, S. Ohnuma, and G. Wang, “Multi-parameter Sorting of Dipoles for Large Superconducting Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1051-1054.
[n] A. Tikhomirov, M. El-Shazly, G. Gulbekian, and R. Oganessian, “Modeling of the Beam Transmission Efficiency Dependent on the Charge Exchange with the Residual Gas for the CI-100 Cyclotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH086, pp. 3042-3044.
[n] C.-J. Jing, W. Gai, S. H. Gold, A. K. Kinkead, R. Konecny, and J. G. Power, “Progress on High Power Tests of Dielectric-Loaded Accelerating Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE017, pp. 1566-1568.
[n] R. Nagaoka, P. Elleaume, L. Farvacque, and J. M. Filhol, “Correction of Linear Coupling on the basis of Response Matrix Modelling and X-Ray Pinhole Measurement”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP71, pp. 3119-3121.
[n] J. N. Galayda, R. N. Heese, and S. Krinsky, “Inhomogeneities in Magnetic Field due to Variations of Lamination Gap Heights”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2815-2818.
[n] D. P. May, F. P. Abegglen, G. J. Derrig, and G. J. Kim, “Commissioning of the Texas AM ECR Ion Source High B Upgrade”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-04, pp. 381-384.
[n] S. R. Koscielniak, “Minimum Cost Lattices for Nonscaling FFAGs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS071, pp. 1660-1662.
[n] A. P. Soumbaev, A. S. Kayukov, V. A. Shvets, O. V. Strekalovsky, and M. M. Korjovkina, “Plans for A Control System for The LUE200 Linac in JINR”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH440, pp. 689-691.
[n] L. Pr?ªstegaard et al., “Status of the Canadian Light Source Booster Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI095, pp. 611-613.
For LaTeX
Use Complete Form
For BibTeX
References
- R. E. Timm, “Control of Ion Sources for the Zero Gradient Synchrotron (ZGS)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 613-616.
- W. Liu, W.-H. Huang, C.-X. Tang, and D. Wu, “Optimum of Terahertz Smith-Purcell Radiation Generated the Periodical Ultrashort Bunched Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE033, pp. 2215-2217.
- E. S. Masunov and A. V. Samoshin, “Using Smooth Approximation for Beam Dynamics Investigation in Superconducting Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN084, pp. 1568-1570.
- S. Koscielniak, “Correction of Field Errors in ISAC RFQ”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP133G, pp. 1298-1300.
- D. Reggiani, “Extraction, Transport and Collimation of the PSI 1.3 MW Proton Beam”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3A03, pp. 373-377.
- K. Yamamoto, N. Hayashi, and M. Kinsho, “Residual Dose with 400 MeV Injection Energy at J-PARC Rapid Cycling Synchrotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3379-3381.
- S. O. Schriber, “To be pi or not to be pi: That is the Dilemma”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO028, pp. 2280-2282.
- V. V. Altsybeyev and D. A. Ovsyannikov, “Optimization of Beam Parameters in APF Channel”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP130, pp. 722-725.
- P. R. Sarma, R. K. Bhandari, and S. K. Pattanayak, “Improvement of Field Quality of Glaser Magnets Used for Focusing Ion Beams”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-05, pp. 466-469.
- K. Ziegler, “Invited Paper: Running in of VICKSI and First Operating Experience”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-01, pp. 1872-1878.
- I. A. Ivanenko, I. V. Kalagin, V. I. Kazacha, and N. Yu. Kazarinov, “Getting Uniform Ion Density on Target in High-Energy Beam Line of Cyclotron U-400M with Two”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT007, pp. 335-337.
- G. Bellomo and P. Pierini, “Beam Dynamics in a Proposed 350 MHZ SC Linac for Waste Transmutation and Energy Production”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP01F, pp. 1103-1105.
- E. Bargall?â et al., “Value Engineering of an Accelerator Design During Construction”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 592-594.
- F. Sonnemann and F. Rodriguez-Mateos, “Quench Heater Studies for the LHC Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH094, pp. 3451-3453.
- E. Marin, A. Latina, F. Plassard, D. Schulte, and R. Tomas, “CLIC Tuning Performance Under Realistic Error Conditions”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2403-2406.
- K. Hedblom, “Beam Dynamics in Synchrotrons with Two RF Systems”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 965-968.
- M. G. Abbott, G. Rehm, and I. S. Uzun, “Architecture of Transverse Multi-Bunch Feedback Processor at Diamond”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 298-301.
- E. D. Hudson and F. E. McDaniel, “Magnet System for 4- MeV Experimental Separated-Orbit Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 456-460.
- M. Billing, N. Mistry, L. Phillips, and D. Thomas, “Some Aspects of the Vacuum System for the Proposed Storage Ring CESR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1370-1373.
- J. Shi, S. Ohnuma, and G. Wang, “Multi-parameter Sorting of Dipoles for Large Superconducting Rings”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1051-1054.
- A. Tikhomirov, M. El-Shazly, G. Gulbekian, and R. Oganessian, “Modeling of the Beam Transmission Efficiency Dependent on the Charge Exchange with the Residual Gas for the CI-100 Cyclotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH086, pp. 3042-3044.
- C.-J. Jing, W. Gai, S. H. Gold, A. K. Kinkead, R. Konecny, and J. G. Power, “Progress on High Power Tests of Dielectric-Loaded Accelerating Structures”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE017, pp. 1566-1568.
- R. Nagaoka, P. Elleaume, L. Farvacque, and J. M. Filhol, “Correction of Linear Coupling on the basis of Response Matrix Modelling and X-Ray Pinhole Measurement”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP71, pp. 3119-3121.
- J. N. Galayda, R. N. Heese, and S. Krinsky, “Inhomogeneities in Magnetic Field due to Variations of Lamination Gap Heights”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2815-2818.
- D. P. May, F. P. Abegglen, G. J. Derrig, and G. J. Kim, “Commissioning of the Texas AM ECR Ion Source High B Upgrade”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-04, pp. 381-384.
- S. R. Koscielniak, “Minimum Cost Lattices for Nonscaling FFAGs”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS071, pp. 1660-1662.
- A. P. Soumbaev, A. S. Kayukov, V. A. Shvets, O. V. Strekalovsky, and M. M. Korjovkina, “Plans for A Control System for The LUE200 Linac in JINR”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH440, pp. 689-691.
- L. Pr?ªstegaard et al., “Status of the Canadian Light Source Booster Synchrotron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI095, pp. 611-613.
Back to search