Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Kikutani, S. Kurokawa, Y. Minagawa, and M. Tobiyama, “A Systematic Study of a Transverse Feedback System with a Two-Tap FIR Filter”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP057L, pp. 1896-1898.
[n] K. Nakajima et al., “A Short Pulse X-Ray Generation via Thomson Scattering of Ultrashort Laser Pulses by Relativistic Electron Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V014, pp. 760-762.
[n] V. Rieker, J. J. Bateman, R. Corsini, L. A. Dyks, W. Farabolini, and P. Korysko, “VHEE High Dose Rate Dosimetry Studies in CLEAR”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3026-3029. doi:10.18429/JACoW-IPAC2022-THPOMS031
[n] S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548.
[n] W. J. Leonhardt, J. R. Cullen, and P. F. Gill, “Stress Rupture Considerations in the Design of Large Aperture, Low Mass Composite Vacuum Windows”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P002, pp. 3583-3585.
[n] F. M?®ot, P. N. Joshi, J. P. Lidestri, M. R. Subramanian, and N. Tsoupas, “Tracking Dynamic Aperture in the iRCMS Hadrontherapy Synchrotron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2442-2444. doi:10.18429/JACoW-IPAC2022-THPOST005
[n] M. A. Nozdrin et al., “Hollow Photocathode Prototype for e-Gun”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD84, pp. 242-244.
[n] I. Ander, Z. Korm?íny, P. Kov?ícs, T. Lakatos, and I. Sz??cs, “Renewal and Automation of the ATOMKI MGC-20 Cyclotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7A07, pp. 1844-1846.
[n] M. Bieler, E. Lohrmann, A. Meseck, G. Nawrath, M. Seidel, and F. Willeke, “Design of a High Power Synchrotron Radiation Absorber for HERA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THCR6, pp. 554-556.
[n] P. Musumeci, C. Pellegrini, J. B. Rosenzweig, A. A. Varfolomeev, S. Tolmachev, and T. Yarovoi, “On the IFEL Experiment at the UCLA NEPTUNE Lab”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH143, pp. 4008-4010.
[n] T. T. Arkan et al., “200 MV Record Voltage of vCM and LCLS-II-HE Cryomodules Production Start Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 95-97. doi:10.18429/JACoW-LINAC2022-MOPOPA13
[n] L. A. Dyks, P. Burrows, R. Corsini, and P. Korysko, “The Design of a Second Beamline for the CLEAR User Facility at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2479-2482. doi:10.18429/JACoW-IPAC2022-THPOST018
[n] S. Chaurize et al., “Optimization of the Booster Notch System at Fermilab”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2002-2004. doi:10.18429/JACoW-IPAC2017-TUPIK117
[n] G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 474-477. doi:10.18429/JACoW-IPAC2025-MOPM066
[n] W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
[n] F. Valentini, M. Munoz-Codoceo, and P. Ninin, “Versatile Service for the Protection of Experimental Areas at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1634-1638. doi:10.18429/JACoW-ICALEPCS2017-THPHA108
[n] M. Kumada and K. Nakajima, “Laser FEL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP112, pp. 2510-2512.
[n] J. Le Duff, “Advanced Accelerator RD at LAL/ORSAY”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE2-02, pp. 285-289.
[n] S. Myers, “High Energy Operation of LEP2”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEBR1, pp. 299-303.
[n] D. K. Morris et al., “Operational Use of Ionization Profile Monitors in the Fermilab Main Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP222, pp. 519-521.
[n] D. E. Suddeth, “Air-Filled Ion Chamber Beam Loss Monitors for the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 602-605.
[n] N. Tsoupas et al., “Electromagnetic Study and Measurements of the iRCMS Cell”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 403-405. doi:10.18429/JACoW-IPAC2019-MOPGW123
[n] K. Vetter, W. X. Cheng, J. Mead, B. Podobedov, and Y. Tian, “The BNL EBPM Electronics, High Performance for Next Generation Storage Rings”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. XX-XX. doi:10.18429/JACoW-NAPAC2016-MOA2IO02
[n] J. Dietrich et al., “Non-destructive Beam Position and Profile Measurements Using Light Emitted by Residual Gas in a Cyclotron Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC022, pp. 1095-1097.
[n] A. V. Bubley et al., “Compass for Measuring the Magnetic Lines Straightness at the Cooling Section in Vacuum”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO12, pp. 121-123.
[n] A. Faus-Golfe and J. Le Duff, “A Versatile TBA Lattice for a Tau-Charm Factory with and without Beam Monochromatization”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 479-482.
[n] K. Nakajima et al., “High Energy-Gain Laser Wakefield Acceleration”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V048, pp. 648-650.
[n] N. Delerue et al., “The Synchronization System of the Thomx Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2243-2246. doi:10.18429/JACoW-IPAC2018-WEPAL035
[n] M. Diwan, S. Kahn, and R. B. Palmer, “A Solenoidal Capture System For Neutrino Production”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP32, pp. 3023-3025.
[n] H. Yim, D. H. An, G. Hahn, and Y.-S. Kim, “Lattice Study of a Compact Synchrotron for Carbon Therapy”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-07, pp. 303-305.
[n] H. Dollard, D. R. Heywood, D. E. Marquardt, D. P. Gurd, and R. R. Johnson, “CAMAC Controls Applications at TRIUMF”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 485-490.
[n] G. Wu, D. Capista, and S. Pruss, “A New Study of the Main Ring Physical Aperture”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2252-2254.
[n] B. C. Brown et al., “Fermilab Recycler Collimation System Design”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 726-728. doi:10.18429/JACoW-NAPAC2016-WEPOA16
[n] L. Ristori et al., “Development and Performance of RFD Crab Cavity Prototypes for HL-LHC AUP”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 531-535. doi:10.18429/JACoW-SRF2023-TUPTB046
[n] I. Igor et al., “VIL410, CPI's 1.3 GHz, 25 kW CW IOT Amplifier System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2305-2307. doi:10.18429/JACoW-IPAC2014-WEPME023
[n] S. Hashimoto et al., “First Observation of Quasiperiodic Undulator Radiation”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP061G, pp. 2549-2551.
[n] P. Lapostolle, “Recent Developments on Beam Dynamics in Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EI-01, pp. 317-326.
[n] J. L. Biarrotte et al., “704 MHz Superconducting Cavities for a High-Intensity Proton Accelerator”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP005, pp. 384-389.
[n] P. Belochitskii et al., “Beam Optics Issues for the Antiproton Decelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V011, pp. 1382-1384.
[n] V. Zubko et al., “Stability of Fast-cycling Dipole for SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF066, pp. 1756-1758.
[n] J. Beebe-Wang et al., “A Particle-in-Cell Model for Space Charge Dynamics in Rings”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP24C, pp. 1109-1111.
[n] P. J. Tallerico, M. L. Crow, A. Guthrie, G. Johnson, and J. Schubert, “The Conventional Facilities Requirements for the SNS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH066, pp. 3377-3379.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Kikutani, S. Kurokawa, Y. Minagawa, and M. Tobiyama, “A Systematic Study of a Transverse Feedback System with a Two-Tap FIR Filter”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP057L, pp. 1896-1898.
- K. Nakajima et al., “A Short Pulse X-Ray Generation via Thomson Scattering of Ultrashort Laser Pulses by Relativistic Electron Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V014, pp. 760-762.
- V. Rieker, J. J. Bateman, R. Corsini, L. A. Dyks, W. Farabolini, and P. Korysko, “VHEE High Dose Rate Dosimetry Studies in CLEAR”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3026-3029.
- S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548.
- W. J. Leonhardt, J. R. Cullen, and P. F. Gill, “Stress Rupture Considerations in the Design of Large Aperture, Low Mass Composite Vacuum Windows”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P002, pp. 3583-3585.
- F. M?®ot, P. N. Joshi, J. P. Lidestri, M. R. Subramanian, and N. Tsoupas, “Tracking Dynamic Aperture in the iRCMS Hadrontherapy Synchrotron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2442-2444.
- M. A. Nozdrin et al., “Hollow Photocathode Prototype for e-Gun”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD84, pp. 242-244.
- I. Ander, Z. Korm?íny, P. Kov?ícs, T. Lakatos, and I. Sz??cs, “Renewal and Automation of the ATOMKI MGC-20 Cyclotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7A07, pp. 1844-1846.
- M. Bieler, E. Lohrmann, A. Meseck, G. Nawrath, M. Seidel, and F. Willeke, “Design of a High Power Synchrotron Radiation Absorber for HERA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THCR6, pp. 554-556.
- P. Musumeci, C. Pellegrini, J. B. Rosenzweig, A. A. Varfolomeev, S. Tolmachev, and T. Yarovoi, “On the IFEL Experiment at the UCLA NEPTUNE Lab”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH143, pp. 4008-4010.
- T. T. Arkan et al., “200 MV Record Voltage of vCM and LCLS-II-HE Cryomodules Production Start Fermilab”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 95-97.
- L. A. Dyks, P. Burrows, R. Corsini, and P. Korysko, “The Design of a Second Beamline for the CLEAR User Facility at CERN”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2479-2482.
- S. Chaurize et al., “Optimization of the Booster Notch System at Fermilab”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2002-2004.
- G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM066, pp. 474-477.
- W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
- F. Valentini, M. Munoz-Codoceo, and P. Ninin, “Versatile Service for the Protection of Experimental Areas at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1634-1638.
- M. Kumada and K. Nakajima, “Laser FEL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP112, pp. 2510-2512.
- J. Le Duff, “Advanced Accelerator RD at LAL/ORSAY”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE2-02, pp. 285-289.
- S. Myers, “High Energy Operation of LEP2”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEBR1, pp. 299-303.
- D. K. Morris et al., “Operational Use of Ionization Profile Monitors in the Fermilab Main Injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP222, pp. 519-521.
- D. E. Suddeth, “Air-Filled Ion Chamber Beam Loss Monitors for the Zero Gradient Synchrotron (ZGS)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 602-605.
- N. Tsoupas et al., “Electromagnetic Study and Measurements of the iRCMS Cell”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 403-405.
- K. Vetter, W. X. Cheng, J. Mead, B. Podobedov, and Y. Tian, “The BNL EBPM Electronics, High Performance for Next Generation Storage Rings”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. XX-XX.
- J. Dietrich et al., “Non-destructive Beam Position and Profile Measurements Using Light Emitted by Residual Gas in a Cyclotron Beam Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC022, pp. 1095-1097.
- A. V. Bubley et al., “Compass for Measuring the Magnetic Lines Straightness at the Cooling Section in Vacuum”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO12, pp. 121-123.
- A. Faus-Golfe and J. Le Duff, “A Versatile TBA Lattice for a Tau-Charm Factory with and without Beam Monochromatization”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 479-482.
- K. Nakajima et al., “High Energy-Gain Laser Wakefield Acceleration”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V048, pp. 648-650.
- N. Delerue et al., “The Synchronization System of the Thomx Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2243-2246.
- M. Diwan, S. Kahn, and R. B. Palmer, “A Solenoidal Capture System For Neutrino Production”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP32, pp. 3023-3025.
- H. Yim, D. H. An, G. Hahn, and Y.-S. Kim, “Lattice Study of a Compact Synchrotron for Carbon Therapy”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-07, pp. 303-305.
- H. Dollard, D. R. Heywood, D. E. Marquardt, D. P. Gurd, and R. R. Johnson, “CAMAC Controls Applications at TRIUMF”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 485-490.
- G. Wu, D. Capista, and S. Pruss, “A New Study of the Main Ring Physical Aperture”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2252-2254.
- B. C. Brown et al., “Fermilab Recycler Collimation System Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 726-728.
- L. Ristori et al., “Development and Performance of RFD Crab Cavity Prototypes for HL-LHC AUP”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB046, pp. 531-535.
- I. Igor et al., “VIL410, CPI's 1.3 GHz, 25 kW CW IOT Amplifier System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2305-2307.
- S. Hashimoto et al., “First Observation of Quasiperiodic Undulator Radiation”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP061G, pp. 2549-2551.
- P. Lapostolle, “Recent Developments on Beam Dynamics in Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EI-01, pp. 317-326.
- J. L. Biarrotte et al., “704 MHz Superconducting Cavities for a High-Intensity Proton Accelerator”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP005, pp. 384-389.
- P. Belochitskii et al., “Beam Optics Issues for the Antiproton Decelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V011, pp. 1382-1384.
- V. Zubko et al., “Stability of Fast-cycling Dipole for SIS300 Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF066, pp. 1756-1758.
- J. Beebe-Wang et al., “A Particle-in-Cell Model for Space Charge Dynamics in Rings”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP24C, pp. 1109-1111.
- P. J. Tallerico, M. L. Crow, A. Guthrie, G. Johnson, and J. Schubert, “The Conventional Facilities Requirements for the SNS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH066, pp. 3377-3379.
Back to search