Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. K. Cooper and G. P. Lawrence, “Beam Emittance Growth in a Proton Storage Ring Employing Charge Exchange Injection”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1916-1919.
[n] S. G. Tantawi, T. G. Lee, R. D. Ruth, A. E. Vlieks, and M. Zolotorev, “Design of a Multi-Megawatt X-Band Solid State Microwave Switch”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ27, pp. 1584-1586.
[n] J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO018
[n] J. Miertusova, F. Mazzolini, F. Pradal, and L. Rumiz, “Performance of Insertion Device Vacuum Chambers at ELETTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO026, pp. 2577-2579.
[n] M. G. Minty, R. Akre, F. J. Decker, and J. Turner, “Operation and Performance of Bunch Precompression for Increased Current Transmission at the SLC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B013, pp. 1569-1571.
[n] T. Fieguth et al., “PEP-II Injection Transport Construction Status and Commissioning Plans”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAQ15, pp. 1876-1878.
[n] H. Ludewig et al., “Collimator Systems for the SNS Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THCR4, pp. 548-550.
[n] V. Avagyan, H. Gagiyan, S. Nagdalyan, and A. Petrosyan, “Vacuum Chamber Design Considerations for CANDLE Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO027, pp. 2532-2534.
[n] R. J. Faehl, B. B. Godfrey, and W. R. Shanahan, “A Phase Modulated Collective Ion Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4226-4229.
[n] J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
[n] G. T. Danby, J. E. Allinger, and J. W. Jackson, “Economical Cryogenic Pulsed Synchrotrons for Very High Energies”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 685-690.
[n] L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1142-1148. doi:10.18429/JACoW-ICALEPCS2017-THBPA02
[n] E. B. Blum and R. Nawrocky, “Tune Measurement in the NSLS Booster Synchrotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2246-2249.
[n] P. K. Den Hartog, J. Gagliano, G. A. Goeppner, J. Noonan, E. Trakhtenberg, and G. Wiemerslage, “Vacuum System of the APS: Operation Experience and Status Report”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPB003, pp. 607-609.
[n] U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1132-1135.
[n] V. Variale et al., “First Test Results of a Residual Gas Beam Profile Monitor”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P053, pp. 2169-2170.
[n] W. A. Ryan and T. J. Shea, “An Sampling Detector for the RHIC BPM Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ04, pp. 2455-2457.
[n] L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
[n] A. W. Maschke, “Relativistic Heavy Ions for Fusion Applications”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1825-1826.
[n] C. Courtois et al., “Intensity Control in GANIL's Experimental Rooms”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF31, pp. 587-589.
[n] J. W. Lewellen, D. Gorelov, D. Perez, M. E. Schneider, and E. I. Simakov, “A Coupon Tester for Normal Conducting High-Gradient Materials”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1147-1150. doi:10.18429/JACoW-IPAC2021-MOPAB371
[n] Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
[n] W. Chou, “Cost Consideration and a Possible Construction Timeline of the CEPC-SPPC”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT2A3, pp. 95-98.
[n] S. Krinsky and J. M. Wang, “Longitudinal Instabilities of Long Gaussian Bunches”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2495-2498.
[n] J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
[n] F. Belloni, D. Doria, A. Lorusso, V. Nassisi, and L. Torrisi, “Development of an Ion Source via Laser Ablation Plasma”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH139, pp. 3119-3121.
[n] R. L. Poirier, T. Enegren, and C. Haddock, “Perpendicular Biased Ferrite Tuned RF Cavity for the TRIUMF KAON Factory Booster Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 171-174.
[n] J. J. Barnard et al., “Progress in Heavy Ion Driven Inertial Fusion Energy: From Scaled Experiments to the Integrated Research Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAA005, pp. 314-318.
[n] K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
[n] X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n] A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2898-2901.
[n] F. Matichard, “System and Subsystem Engineering of Long Baseline Detectors”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper TUIO01, pp. XX-XX.
[n] J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 758-761. doi:10.18429/JACoW-NAPAC2016-WEPOA30
[n] G. Ambrosio et al., “Design and Development of Nb3Sn Single-Layer Common Coil Dipole Magnet for VLHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH079, pp. 3409-3411.
[n] H.-D. Nuhn et al., “A 2-4 nm Linac Coherent Light Source (LCLS) Using the SLAC Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1445-1448.
[n] J. L. Conradie, A. H. Botha, and J. G. de Villiers, “A Flat-Topping System for the NAC Separated-Sector Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-17, pp. 215-218.
[n] F. Zimmermann et al., “An RF Bunch-Length Monitor for the SLC Final Focus”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P060, pp. 2189-2191.
[n] J. L. Conradie, “THE ACCELERATOR FACILITIES OF THE NATIONAL RESEARCH FOUNDATION IN SOUTH AFRICA”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCAU01, pp. XX-XX.
[n] J. Safranek and M. Lee, “Calibration of the X-Ray Ring Quadrupoles, BPMs, and Orbit Correctors using the Measured Orbit Response Matrix”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1027-1030.
[n] C. H. Kuo, Y. K. Chen, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, and K. H. Hu, “New Bunch-by-Bunch Feedback System for the TLS”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD23, pp. 353-355.
[n] R. Boni, A. Gallo, F. Marcellini, and G. Vignola, “Operational Experience with the DA NE Radio-Frequency Systems”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP84, pp. 866-868.
For LaTeX
Use Complete Form
For BibTeX
References
- R. K. Cooper and G. P. Lawrence, “Beam Emittance Growth in a Proton Storage Ring Employing Charge Exchange Injection”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1916-1919.
- S. G. Tantawi, T. G. Lee, R. D. Ruth, A. E. Vlieks, and M. Zolotorev, “Design of a Multi-Megawatt X-Band Solid State Microwave Switch”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ27, pp. 1584-1586.
- J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244.
- J. Miertusova, F. Mazzolini, F. Pradal, and L. Rumiz, “Performance of Insertion Device Vacuum Chambers at ELETTRA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO026, pp. 2577-2579.
- M. G. Minty, R. Akre, F. J. Decker, and J. Turner, “Operation and Performance of Bunch Precompression for Increased Current Transmission at the SLC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B013, pp. 1569-1571.
- T. Fieguth et al., “PEP-II Injection Transport Construction Status and Commissioning Plans”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAQ15, pp. 1876-1878.
- H. Ludewig et al., “Collimator Systems for the SNS Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THCR4, pp. 548-550.
- V. Avagyan, H. Gagiyan, S. Nagdalyan, and A. Petrosyan, “Vacuum Chamber Design Considerations for CANDLE Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO027, pp. 2532-2534.
- R. J. Faehl, B. B. Godfrey, and W. R. Shanahan, “A Phase Modulated Collective Ion Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4226-4229.
- J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
- G. T. Danby, J. E. Allinger, and J. W. Jackson, “Economical Cryogenic Pulsed Synchrotrons for Very High Energies”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 685-690.
- L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1142-1148.
- E. B. Blum and R. Nawrocky, “Tune Measurement in the NSLS Booster Synchrotron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2246-2249.
- P. K. Den Hartog, J. Gagliano, G. A. Goeppner, J. Noonan, E. Trakhtenberg, and G. Wiemerslage, “Vacuum System of the APS: Operation Experience and Status Report”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPB003, pp. 607-609.
- U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1132-1135.
- V. Variale et al., “First Test Results of a Residual Gas Beam Profile Monitor”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P053, pp. 2169-2170.
- W. A. Ryan and T. J. Shea, “An Sampling Detector for the RHIC BPM Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ04, pp. 2455-2457.
- L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
- A. W. Maschke, “Relativistic Heavy Ions for Fusion Applications”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1825-1826.
- C. Courtois et al., “Intensity Control in GANIL's Experimental Rooms”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF31, pp. 587-589.
- J. W. Lewellen, D. Gorelov, D. Perez, M. E. Schneider, and E. I. Simakov, “A Coupon Tester for Normal Conducting High-Gradient Materials”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1147-1150.
- Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714.
- W. Chou, “Cost Consideration and a Possible Construction Timeline of the CEPC-SPPC”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT2A3, pp. 95-98.
- S. Krinsky and J. M. Wang, “Longitudinal Instabilities of Long Gaussian Bunches”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2495-2498.
- J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
- F. Belloni, D. Doria, A. Lorusso, V. Nassisi, and L. Torrisi, “Development of an Ion Source via Laser Ablation Plasma”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH139, pp. 3119-3121.
- R. L. Poirier, T. Enegren, and C. Haddock, “Perpendicular Biased Ferrite Tuned RF Cavity for the TRIUMF KAON Factory Booster Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 171-174.
- J. J. Barnard et al., “Progress in Heavy Ion Driven Inertial Fusion Energy: From Scaled Experiments to the Integrated Research Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOAA005, pp. 314-318.
- K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
- X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4298-4300.
- A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2898-2901.
- F. Matichard, “System and Subsystem Engineering of Long Baseline Detectors”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper TUIO01, pp. XX-XX.
- J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 758-761.
- G. Ambrosio et al., “Design and Development of Nb3Sn Single-Layer Common Coil Dipole Magnet for VLHC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH079, pp. 3409-3411.
- H.-D. Nuhn et al., “A 2-4 nm Linac Coherent Light Source (LCLS) Using the SLAC Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1445-1448.
- J. L. Conradie, A. H. Botha, and J. G. de Villiers, “A Flat-Topping System for the NAC Separated-Sector Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-17, pp. 215-218.
- F. Zimmermann et al., “An RF Bunch-Length Monitor for the SLC Final Focus”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P060, pp. 2189-2191.
- J. L. Conradie, “THE ACCELERATOR FACILITIES OF THE NATIONAL RESEARCH FOUNDATION IN SOUTH AFRICA”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCAU01, pp. XX-XX.
- J. Safranek and M. Lee, “Calibration of the X-Ray Ring Quadrupoles, BPMs, and Orbit Correctors using the Measured Orbit Response Matrix”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1027-1030.
- C. H. Kuo, Y. K. Chen, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, and K. H. Hu, “New Bunch-by-Bunch Feedback System for the TLS”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD23, pp. 353-355.
- R. Boni, A. Gallo, F. Marcellini, and G. Vignola, “Operational Experience with the DA NE Radio-Frequency Systems”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP84, pp. 866-868.
Back to search