Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. D. Liu, Z. Y. Guo, Q. Qin, J. Q. Wang, and J. Xing, “Simulation of the Electron Cloud Instability for BEPCII”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15007, pp. XX-XX.
[n] S. Machida et al., “High Intensity Beam Studies Using the KURRI FFAGs”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT031, pp. 387-389.
[n] D. E. Suddeth, D. R. Schmitt, R. E. Timm, and A. J. Wright, “Pole Face Winding (PFW) Equipment for Eddy Current Correction at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 397-399.
[n] R. C. Vondrasek, J. Carr, R. C. Pardo, and R. Scott, “Initial Results of the ECR Charge Breeder for the 252Cf Fission Source Project (CARIBU) at ATLAS”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper WE-07, pp. 118-122.
[n] B. Popovic et al., “Fabrication and testing of mode couplers for a 180 GHz colinear wakefield accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 485-488. doi:10.18429/JACoW-IPAC2024-MOPR15
[n] L. David and E. L?®corch?®, “Software Trends for Both the GANIL SPIRAL Control”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper H-04, pp. 564-566.
[n] V. Bharadwaj et al., “Operation of the FERMILAB Accumulator for Medium Energy Proton-Antiproton Physics”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 617-620.
[n] C. Liu et al., “Local and global betatron coupling correction based on beam position measurements in RHIC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPC05, unpublished.
[n] T. Toyama et al., “Performance of the Main Ring BPM during the Beam Commissioning at J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE012, pp. 981-983.
[n] R. R. Lindberg and K. Kim, “Power Variations of an X-ray FEL Oscillator in Saturation”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 114-117. doi:10.18429/JACoW-FEL2019-TUP028
[n] D. Naito, A. Motomura, N. Yamamoto, S. Sakanaka, and T. Takahashi, “Commissioning of the digital LLRF system at the KEK Photon Factory 2.5 GeV ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3442-3445. doi:10.18429/JACoW-IPAC2024-THPG71
[n] J. Dehen, W. Barth, H. Deitinghoff, and A. Schempp, “Transport of Ions in a RFQ Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 967-970.
[n] G. M. Wang et al., “Beam Diagnostics using BPM Signals from Injected and Stored Beams in a Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP132, pp. 2369-2371.
[n] A. Blas et al., “The New CERN PS Transverse Damper”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP075, pp. 2183-2185.
[n] M. E. Angoletta et al., “Longitudinal Beam Diagnostic from a Distributed Electrostatic Pick-Up in CERN's ELENA Ring”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF28, pp. 883-886.
[n] Y. Mori, M. Muto, and K. Okabe, “An Intense Neutron Source with Emittance Recovery Internal Target (ERIT) Using Ionization Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP067, pp. 3512-3514.
[n] A. Wambersie, “Radiobiological and Clinical Bases of Particle Therapy (Review)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 268-271.
[n] B. Krasch, F. Abusaif, A. Grau, N. Glamann, R. Nast, and D. Saez de Jauregui, “Design study of a compact superconducting undulator based on laser-structured HTS tapes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3781-3784. doi:10.18429/JACoW-IPAC2024-THPS22
[n] G. LeBlanc, Å. Andersson, M. Eriksson, M. Georgsson, L.-J. Lindgren, and S. Werin, “The MAX-III Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH015, pp. 2474-2475.
[n] R. W. Mueller et al., “Proton Model of a Heavy-Ion RFQ Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2862-2865.
[n] M. Yakopov et al., “Upgrade of the European XFEL Phase Shifters”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1479. doi:10.18429/JACoW-ICALEPCS2019-WEPHA165
[n] T. Uesugi, Y. Mori, and Y. Ishi, “Short pulsed beam extraction from Kurns FFAG”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 952-954. doi:10.18429/JACoW-IPAC2023-MOPL178
[n] T. Xin et al., “A GPU Based 3D Particle Tracking Code for Multipacting Simulation”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB060, pp. 242-245.
[n] N. Baboi, G. B. Bowden, V. A. Dolgashev, R. M. Jones, S. G. Tantawi, and J. W. Wang, “Coaxial Wire Measurements in NLC Accelerating Structures”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI119, pp. 1440-1442.
[n] A. V. Bogomyagkov, E. B. Levichev, and S. V. Sinyatkin, “Status of Novosibirsk Super Tau Charm Factory”, in Proc. IPAC'20, Caen, France, May 2020, paper WEZZPLM01, pp. XX-XX.
[n] E. Pozdeyev, N. K. Bultman, G. Machicoane, G. Morgan, X. Rao, and Q. Zhao, “Status of the FRIB Front End”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOAB1, pp. 734-736.
[n] Y. Jiao, D. Ji, and G. Xu, “Latest Design and Optimization of the PEPX-type Lattice for HEPS”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper THPMH1, pp. 110-112.
[n] T. Shintake et al., “Status of SCSS: Spring-8 Compact SASE Source Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI116, pp. 840-842.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. D. Liu, Z. Y. Guo, Q. Qin, J. Q. Wang, and J. Xing, “Simulation of the Electron Cloud Instability for BEPCII”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15007, pp. XX-XX.
- S. Machida et al., “High Intensity Beam Studies Using the KURRI FFAGs”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT031, pp. 387-389.
- D. E. Suddeth, D. R. Schmitt, R. E. Timm, and A. J. Wright, “Pole Face Winding (PFW) Equipment for Eddy Current Correction at the Zero Gradient Synchrotron (ZGS)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 397-399.
- R. C. Vondrasek, J. Carr, R. C. Pardo, and R. Scott, “Initial Results of the ECR Charge Breeder for the 252Cf Fission Source Project (CARIBU) at ATLAS”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper WE-07, pp. 118-122.
- B. Popovic et al., “Fabrication and testing of mode couplers for a 180 GHz colinear wakefield accelerator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR15, pp. 485-488.
- L. David and E. L?®corch?®, “Software Trends for Both the GANIL SPIRAL Control”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper H-04, pp. 564-566.
- V. Bharadwaj et al., “Operation of the FERMILAB Accumulator for Medium Energy Proton-Antiproton Physics”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 617-620.
- C. Liu et al., “Local and global betatron coupling correction based on beam position measurements in RHIC”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC05, unpublished.
- T. Toyama et al., “Performance of the Main Ring BPM during the Beam Commissioning at J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE012, pp. 981-983.
- R. R. Lindberg and K. Kim, “Power Variations of an X-ray FEL Oscillator in Saturation”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 114-117.
- D. Naito, A. Motomura, N. Yamamoto, S. Sakanaka, and T. Takahashi, “Commissioning of the digital LLRF system at the KEK Photon Factory 2.5 GeV ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG71, pp. 3442-3445.
- J. Dehen, W. Barth, H. Deitinghoff, and A. Schempp, “Transport of Ions in a RFQ Accelerator”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 967-970.
- G. M. Wang et al., “Beam Diagnostics using BPM Signals from Injected and Stored Beams in a Storage Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP132, pp. 2369-2371.
- A. Blas et al., “The New CERN PS Transverse Damper”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP075, pp. 2183-2185.
- M. E. Angoletta et al., “Longitudinal Beam Diagnostic from a Distributed Electrostatic Pick-Up in CERN's ELENA Ring”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF28, pp. 883-886.
- Y. Mori, M. Muto, and K. Okabe, “An Intense Neutron Source with Emittance Recovery Internal Target (ERIT) Using Ionization Cooling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP067, pp. 3512-3514.
- A. Wambersie, “Radiobiological and Clinical Bases of Particle Therapy (Review)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 268-271.
- B. Krasch, F. Abusaif, A. Grau, N. Glamann, R. Nast, and D. Saez de Jauregui, “Design study of a compact superconducting undulator based on laser-structured HTS tapes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS22, pp. 3781-3784.
- G. LeBlanc, Å. Andersson, M. Eriksson, M. Georgsson, L.-J. Lindgren, and S. Werin, “The MAX-III Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH015, pp. 2474-2475.
- R. W. Mueller et al., “Proton Model of a Heavy-Ion RFQ Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2862-2865.
- M. Yakopov et al., “Upgrade of the European XFEL Phase Shifters”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1479.
- T. Uesugi, Y. Mori, and Y. Ishi, “Short pulsed beam extraction from Kurns FFAG”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL178, pp. 952-954.
- T. Xin et al., “A GPU Based 3D Particle Tracking Code for Multipacting Simulation”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB060, pp. 242-245.
- N. Baboi, G. B. Bowden, V. A. Dolgashev, R. M. Jones, S. G. Tantawi, and J. W. Wang, “Coaxial Wire Measurements in NLC Accelerating Structures”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI119, pp. 1440-1442.
- A. V. Bogomyagkov, E. B. Levichev, and S. V. Sinyatkin, “Status of Novosibirsk Super Tau Charm Factory”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper WEZZPLM01, pp. XX-XX.
- E. Pozdeyev, N. K. Bultman, G. Machicoane, G. Morgan, X. Rao, and Q. Zhao, “Status of the FRIB Front End”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOAB1, pp. 734-736.
- Y. Jiao, D. Ji, and G. Xu, “Latest Design and Optimization of the PEPX-type Lattice for HEPS”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper THPMH1, pp. 110-112.
- T. Shintake et al., “Status of SCSS: Spring-8 Compact SASE Source Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI116, pp. 840-842.
Back to search