Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. M. Zwaska, S. E. Kopp, W. Pellico, and R. C. Webber, “Synchronization of the Fermilab Booster and Main Injector for Multiple Batch Injection”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT130, pp. 2771-2773.
[n] A. D. Wu et al., “Low Temperature and Low Pressure Plasma for the HWR Superconducting Cavity In-situ Cleaning”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 595-597. doi:10.18429/JACoW-SRF2017-TUPB087
[n] S. Ahmed et al., “Beam Dynamics Studies of Parallel-Bar Deflecting Cavities”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUODN3, pp. 790-792.
[n] D. T. Palmer et al., “Microwave Measurements of the BNL/SLAC/UCLA 1.6 Cell Photocathode RF Gun”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB13, pp. 982-984.
[n] R. M. Zwaska, “Electron Cloud Studies at the Fermilab Main Injector”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA19, pp. 112-112.
[n] J. V. Lebacqz, A. J. Dudas, and W. R. Fowkes, “The Trirotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3891-3894.
[n] J. E. Unger, J. A. Crittenden, G. H. Hoffstaetter, and D. Marx, “Impacts of an ATS Lattice on EIC Dynamic Aperture”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2373-2375. doi:10.18429/JACoW-IPAC2022-WEPOMS052
[n] A. D. Wu et al., “Vertical Test Results of Plasma In-situ Cleaning on Low Beta HWR Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 408-411. doi:10.18429/JACoW-LINAC2018-TUPO036
[n] Y. L. Huang, J. Guo, R. A. Rimmer, H. Wang, and S. Wang, “Ultra-Fast Harmonic Resonant Kicker Design for the MEIC Electron Circular Cooler Ring”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 75-79. doi:10.18429/JACoW-ERL2015-WEICLH2063
[n] J. Osborn, J. Tanabe, D. Yee, and F. Younger, “Design of the PEP-II Interaction Region Septum Quadrupole”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P039, pp. 3321-3323.
[n] D. T. Palmer et al., “Emittance Studies of the BNL/SLAC/UCLA 1.6 Cell Photocathode RF Gun”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C010, pp. 2687-2689.
[n] D. Giove, P. Gmaj, L. Lo Monaco, G. Raia, and L. Rossi, “Test and Calibration of the Magnetic Measurement System for the Superconducting Cyclotron at LNS, Catania”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 936-939.
[n] Y. T. Huang, C.-C. Chang, J.-R. Chen, G.-Y. Hsiung, and S-N. Hsu, “Laser-Beam Welding for a TPS Beam-Position Monitor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3679-3681. doi:10.18429/JACoW-IPAC2016-THPMY013
[n] J. Qin, M. Bauer, and S. McIntryre, “Use of the Cell Accelerator Platform for Synchrotron Data Analysis”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOMA01, pp. 4-8.
[n] Isao Tanihata, “Role of Cyclotrons in Recent Nuclear Physics”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-1, pp. XX-XX.
[n] L. Calabretta et al., “Beam Transfer Lines for the Tandem-Superconducting Cyclotron at Laboratorio Nazionale Del Sud”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1012-1015.
[n] M. Pham Tu, K. Mbaye, L. Wartski, and J. Halbritter, “Niobium Nitride Coated Superconducting Cavities”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87F03, pp. XX-XX.
[n] B. Liu, Y. L. Chi, M. Gu, and C. Zhang, “New Electron Gun System for BEPCII”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPPE059, unpublished.
[n] J. McKeown, J. S. Fraser, and G. E. McMichael, “Field Control in a Standing Wave Structure at High Average Beam Power”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper E09, pp. 291-295.
[n] J. Halbritter, P. Kneisel, and K. Saito, “Additional Losses in High Purity Niobium Cavities Related to Slow Cooldown and Hydrogen Segregation”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I08, pp. XX-XX.
[n] A. I. Balabin and G. N. Kropachev, “Sign-Alternating Phasing in Accelerating Systems of RF Rectangular Aperture Quadrupoles”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-53, pp. 484-486.
[n] M. Marchetto, M. Comunian, E. Fagotti, A. Palmieri, and A. Pisent, “Study of a High-current 176 MHz RFQ as a Deuteron Injector for the SPES Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT066, pp. 1306-1308.
[n] C. H. Yu et al., “INTERACTION REGION DESIGN AND REALIZATION FOR BEPCII”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH09, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- R. M. Zwaska, S. E. Kopp, W. Pellico, and R. C. Webber, “Synchronization of the Fermilab Booster and Main Injector for Multiple Batch Injection”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT130, pp. 2771-2773.
- A. D. Wu et al., “Low Temperature and Low Pressure Plasma for the HWR Superconducting Cavity In-situ Cleaning”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 595-597.
- S. Ahmed et al., “Beam Dynamics Studies of Parallel-Bar Deflecting Cavities”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUODN3, pp. 790-792.
- D. T. Palmer et al., “Microwave Measurements of the BNL/SLAC/UCLA 1.6 Cell Photocathode RF Gun”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB13, pp. 982-984.
- R. M. Zwaska, “Electron Cloud Studies at the Fermilab Main Injector”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA19, pp. 112-112.
- J. V. Lebacqz, A. J. Dudas, and W. R. Fowkes, “The Trirotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3891-3894.
- J. E. Unger, J. A. Crittenden, G. H. Hoffstaetter, and D. Marx, “Impacts of an ATS Lattice on EIC Dynamic Aperture”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2373-2375.
- A. D. Wu et al., “Vertical Test Results of Plasma In-situ Cleaning on Low Beta HWR Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 408-411.
- Y. L. Huang, J. Guo, R. A. Rimmer, H. Wang, and S. Wang, “Ultra-Fast Harmonic Resonant Kicker Design for the MEIC Electron Circular Cooler Ring”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 75-79.
- J. Osborn, J. Tanabe, D. Yee, and F. Younger, “Design of the PEP-II Interaction Region Septum Quadrupole”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P039, pp. 3321-3323.
- D. T. Palmer et al., “Emittance Studies of the BNL/SLAC/UCLA 1.6 Cell Photocathode RF Gun”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2C010, pp. 2687-2689.
- D. Giove, P. Gmaj, L. Lo Monaco, G. Raia, and L. Rossi, “Test and Calibration of the Magnetic Measurement System for the Superconducting Cyclotron at LNS, Catania”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 936-939.
- Y. T. Huang, C.-C. Chang, J.-R. Chen, G.-Y. Hsiung, and S-N. Hsu, “Laser-Beam Welding for a TPS Beam-Position Monitor”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3679-3681.
- J. Qin, M. Bauer, and S. McIntryre, “Use of the Cell Accelerator Platform for Synchrotron Data Analysis”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOMA01, pp. 4-8.
- Isao Tanihata, “Role of Cyclotrons in Recent Nuclear Physics”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper A-1, pp. XX-XX.
- L. Calabretta et al., “Beam Transfer Lines for the Tandem-Superconducting Cyclotron at Laboratorio Nazionale Del Sud”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1012-1015.
- M. Pham Tu, K. Mbaye, L. Wartski, and J. Halbritter, “Niobium Nitride Coated Superconducting Cavities”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87F03, pp. XX-XX.
- B. Liu, Y. L. Chi, M. Gu, and C. Zhang, “New Electron Gun System for BEPCII”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE059, unpublished.
- J. McKeown, J. S. Fraser, and G. E. McMichael, “Field Control in a Standing Wave Structure at High Average Beam Power”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper E09, pp. 291-295.
- J. Halbritter, P. Kneisel, and K. Saito, “Additional Losses in High Purity Niobium Cavities Related to Slow Cooldown and Hydrogen Segregation”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I08, pp. XX-XX.
- A. I. Balabin and G. N. Kropachev, “Sign-Alternating Phasing in Accelerating Systems of RF Rectangular Aperture Quadrupoles”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-53, pp. 484-486.
- M. Marchetto, M. Comunian, E. Fagotti, A. Palmieri, and A. Pisent, “Study of a High-current 176 MHz RFQ as a Deuteron Injector for the SPES Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT066, pp. 1306-1308.
- C. H. Yu et al., “INTERACTION REGION DESIGN AND REALIZATION FOR BEPCII”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH09, pp. XX-XX.
Back to search