Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Saito et al., “Development of Transformative Cavity Processing - Superiority of Electropolishing on High Gradient Performance over Buffered Chemical Polishing at Low Frequency (322 MHz)”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 145-150. doi:10.18429/JACoW-SRF2023-MOPMB026
[n] T. Shintake et al., “C-Band Linac RF-System for e+e- Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA20, pp. 1099-1101.
[n] B. Podobedov, “New Storage Ring Light Sources on the Horizon”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TOAB008, unpublished.
[n] J. Snuverink, A. Adelmann, C. Baumgarten, and M. Frey, “Precise Modelling and Large Scale Multiobjective Optimisation of Cyclotrons”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 284-284. doi:10.18429/JACoW-CYCLOTRONS2019-THA01
[n] M. Harvey et al., “Realization of a Custom Designed FPGA Based Embedded Controller”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB25, pp. 451-453.
[n] S. Chouhan, D. A. Harder, G. Rakowsky, J. Skaritka, and T. Tanabe, “Research and Development of Variable Polarization Superconducting Undulator at the NSLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB010, pp. 734-736.
[n] R. O. Hettel, “SPEAR 3 - The First Year of Operation”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB006, pp. 505-509.
[n] V. B. Reva et al., “The Electron Cooling for High Energy”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1831-1833. doi:10.18429/JACoW-IPAC2021-TUPAB182
[n] M. Yan, A.-S. Müller, M. J. Nasse, M. Schuh, and M. Schwarz, “Optimization of THz Radiation Pulses at Flute”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3067-3069. doi:10.18429/JACoW-IPAC2016-WEPOY037
[n] G. J. Caporaso and D. L. Birx, “Brightness Measurements on the Livermore High Brightness Test Stand”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2608-2611.
[n] A. V. Otboev et al., “Feasibility Study of the Erlangen Synchrotron Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE012, pp. 724-726.
[n] G. Vandoni et al., “Joint Development of Superferric Corrector Magnets for HL-LHC”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP8031, unpublished.
[n] M. Blaskiewicz, “Stochastic Cooling for Bunched Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAC003, pp. 310-314.
[n] D. Teytelman, “Beam Loading Compensation for Super B-Factories”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAC002, pp. 154-158.
[n] D. Thompson and W. Blokland, “A Shared Memory Interface between LabVIEW and EPICS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU514, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Saito et al., “Development of Transformative Cavity Processing - Superiority of Electropolishing on High Gradient Performance over Buffered Chemical Polishing at Low Frequency (322 MHz)”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB026, pp. 145-150.
- T. Shintake et al., “C-Band Linac RF-System for e+e- Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA20, pp. 1099-1101.
- B. Podobedov, “New Storage Ring Light Sources on the Horizon”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAB008, unpublished.
- J. Snuverink, A. Adelmann, C. Baumgarten, and M. Frey, “Precise Modelling and Large Scale Multiobjective Optimisation of Cyclotrons”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 284-284.
- M. Harvey et al., “Realization of a Custom Designed FPGA Based Embedded Controller”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB25, pp. 451-453.
- S. Chouhan, D. A. Harder, G. Rakowsky, J. Skaritka, and T. Tanabe, “Research and Development of Variable Polarization Superconducting Undulator at the NSLS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAB010, pp. 734-736.
- R. O. Hettel, “SPEAR 3 - The First Year of Operation”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAB006, pp. 505-509.
- V. B. Reva et al., “The Electron Cooling for High Energy”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1831-1833.
- M. Yan, A.-S. Müller, M. J. Nasse, M. Schuh, and M. Schwarz, “Optimization of THz Radiation Pulses at Flute”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3067-3069.
- G. J. Caporaso and D. L. Birx, “Brightness Measurements on the Livermore High Brightness Test Stand”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2608-2611.
- A. V. Otboev et al., “Feasibility Study of the Erlangen Synchrotron Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE012, pp. 724-726.
- G. Vandoni et al., “Joint Development of Superferric Corrector Magnets for HL-LHC”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP8031, this conference.
- M. Blaskiewicz, “Stochastic Cooling for Bunched Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAC003, pp. 310-314.
- D. Teytelman, “Beam Loading Compensation for Super B-Factories”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAC002, pp. 154-158.
- D. Thompson and W. Blokland, “A Shared Memory Interface between LabVIEW and EPICS”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU514, pp. XX-XX.
Back to search
