Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Hatanaka, K. Sato, T. Saito, A. Okada, H. Inoue, and K. Hiramoto, “Design Study on a Cooler-Synchrotron at RCNP ”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D064, pp. 241-243.
[n] J. T. M. Chrin, “An Update on CAFE, a C++ Channel Access Client Library, and its Scripting Language Extensions”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1013-1016. doi:10.18429/JACoW-ICALEPCS2015-WEPGF132
[n] E. Trakhtenberg, J. Erdmann, and B. Powers, “Undulator for the LCLS Project - Changes in the Magnet Structure Design”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT081, pp. 4075-4077.
[n] V. C. Palladino and L. Coney, “Status of the MICE Muon Ionization Cooling Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP057, pp. 1680-1682.
[n] T. J. Schultheiss, J. W. Rathke, P. N. Ostroumov, and A. A. Kolomiets, “RF, Thermal and Structural Analysis of The 57.5 MHz CW RFQ for The RIA Driver LINAC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU467, pp. 470-472.
[n] R. Connolly, J. M. Fite, S. Jao, S. Tepikian, and C. Trabocchi, “Residual-Gas-Ionization Beam Profile Monitors in RHIC”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM010, pp. 116-118.
[n] Y. Li et al., “CesrTA Vacuum System Modifications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP005, pp. 357-359.
[n] J. S. Sokolowski, M. Birk, P. H. Ceperley, H. F. Glavish, S. S. Hanna, and M. Samuel, “Status Report on Stanford's Superconducting Heavy Ion Linac Project”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1141-1144.
[n] F. Saeidi, Z. Azami, E. Ahmadi, K. Noori, and A. Tafrihi, “Conceptual design of multipole injection kicker magnets for the ILSF storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3643-3645. doi:10.18429/JACoW-IPAC2023-WEPM039
[n] D. Mihailescu Stoica, D. Domont-Yankulova, H. Klingbeil, and D. E. M. Lens, “On the Impact of Empty Buckets on the Ferrite Cavity Control Loop Dynamics in High Intensity Hadron Synchrotrons”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3954-3956. doi:10.18429/JACoW-IPAC2017-THPAB100
[n] M. Eriksson et al., “Challenge of MAX IV Towards a Multi-Purpose Highly Brilliant Light Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOBS4, pp. 737-741.
[n] C. C. Hall et al., “Study of CSR Effects in the Jefferson Laboratory FEL Driver”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO27, pp. 58-62.
[n] C. C. Hall, S. Biedron, and S. V. Milton, “Study of 2D CSR Effects in a Compression Chicane”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1181-1183. doi:10.18429/JACoW-NAPAC2016-THPOA37
[n] S. Kazakov et al., “Fast L-band Waveguide Phase Shifter”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP093, pp. 769-771.
[n] A. Favale, “The Transfer of Accelerator Technology to Industry”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH2-01, pp. 587-590.
[n] J. L. Abelleira, R. Tomas, F. Zimmermann, and H. Garcia, “Final-Focus Optics for the LHeC Electron Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR023, pp. 1861-1863.
[n] V. S. Skachkov, “A Variable Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B17, pp. 2122-2124.
[n] S. Nakata and C. Tsukishima, “Design of the Injection System by Half Resonance into a Superconducting Electron Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 260-263.
[n] A. V. Pavlenko, A. M. Batrakov, and I. V. Ilyin, “Electronics for Precise Measurements of Accelerator Pulsed Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA033, pp. 3216-3218.
[n] S. A. Belomestnykh et al., “Superconducting 112 MHz QWR Electron Gun”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO054, pp. 223-225.
[n] J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
[n] S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz, 550 kW Pulsed Klystron for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE019, pp. 1122-1124.
[n] D. E. Johnson, “Design of the Main Injector Extraction Beamlines”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA69, pp. 1243-1245.
[n] B. K. Scheidt, “Detailled Experience of Synchrotron Light Extraction System with Slotted Mirror at the ESRF”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM001, pp. XX-XX.
[n] G. Velev et al., “Fermilab Superconducting Nb?Sn High Field Magnet R&D Program”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4338-4341. doi:10.18429/JACoW-IPAC2019-THPTS099
[n] M. J. P. Adam and C. Bodnarchuk, “Combined Fixed Mask, Photon Shutter, Safety Shutter, and Collimator Design for BXDS IVU at the CLS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 309-311. doi:10.18429/JACoW-MEDSI2016-WEPE01
[n] S. V. Shchelkunov, J. L. Hirshfield, S. Kazakov, N. Solyak, V. P. Yakovlev, and V. E. Teryaev, “High-Power Low-Voltage Multi-Beam Klystrons for ILC and Project-X”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO19, pp. 978-980.
[n] A. Rijllart et al., “Industrial Controls for Test Systems From Superconducting Strands TILL Magnet Fiducialisation In the Tunnel for the LHC Project”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_005.
[n] D. D. Cosic and M. Vi, “Experiment Automation Using EPICS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 625-627. doi:10.18429/JACoW-ICALEPCS2021-WEPV005
[n] P. Lebrun, L. Michelotti, and J.-F. Ostiguy, “Recent Studies of Dispersion Matched Steering for the ILC Bunch Compressor and Main Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN104, pp. 2954-2956.
[n] V. Talanov and M. Wohlmuther, “Numerical and Experimental Study for the Characterization of the Spallation Target Performance of the Ultracold Neutron Source at the Paul Scherrer Institut”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO085, pp. 3960-3962.
[n] V. K. Grishin et al., “X-Ray Radiation by Relativistic Electrons in Condensed Media on Base of MSU Race-Track Microtron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG12, pp. 105-106.
[n] T. Nakanishi et al., “High Polarization and High Quantum Efficiency Cathode Research for Electron-Positron Linear Colliders (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-09, pp. 378-380.
[n] N. E. Vinogradov et al., “Development of Room Temperature Accelerating Structures for the RIA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB030, pp. 2790-2792.
[n] S. Lidia, F. Sannibale, J. Staples, S. Virostek, and R. Wells, “Development of a High-Brightness VHF Electron Source at LBNL”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 22, pp. 37-40.
[n] J. W. Rathke, T. J. Schultheiss, P. N. Ostroumov, A. A. Kolomiets, and D. L. Schrage, “Preliminary Engineering Design of A 57.5 MHz CW RFQ for The RIA Driver LINAC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU466, pp. 467-469.
[n] S. Ano et al., “First Beam Test Result of RFQ Electric Tune Controller at HIMAC Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP22H, pp. 1330-1332.
[n] Z. Izaola, M. Eguiraun, M. del Campo, and I. Bustinduy, “Implementation of a Workflow Model to Store and Analyze Measured Data at the ESS-Bilbao Ion Source Test Stand”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC168, pp. 2376-2378.
[n] J. T. M. Chrin and M. C. Sloan, “CAFE, A Modern C++ Interface to the EPICS Channel Access Library”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS024, pp. 840-843.
[n] W. Bartmann, J. L. Abelleira, K. Hanke, and M. Kowalska, “Upgrades of the CERN PS Booster Ejection Lines”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 858-860. doi:10.18429/JACoW-IPAC2014-MOPRI102
[n] W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925.
[n] I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX.
[n] K. Gross and J. Adamy, “Comparison of LLRF Control Approaches for High Intensity Hadron Synchrotrons: Design and Performance”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC076, pp. 3464-3466.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Hatanaka, K. Sato, T. Saito, A. Okada, H. Inoue, and K. Hiramoto, “Design Study on a Cooler-Synchrotron at RCNP ”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D064, pp. 241-243.
- J. T. M. Chrin, “An Update on CAFE, a C++ Channel Access Client Library, and its Scripting Language Extensions”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1013-1016.
- E. Trakhtenberg, J. Erdmann, and B. Powers, “Undulator for the LCLS Project - Changes in the Magnet Structure Design”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT081, pp. 4075-4077.
- V. C. Palladino and L. Coney, “Status of the MICE Muon Ionization Cooling Experiment”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP057, pp. 1680-1682.
- T. J. Schultheiss, J. W. Rathke, P. N. Ostroumov, and A. A. Kolomiets, “RF, Thermal and Structural Analysis of The 57.5 MHz CW RFQ for The RIA Driver LINAC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU467, pp. 470-472.
- R. Connolly, J. M. Fite, S. Jao, S. Tepikian, and C. Trabocchi, “Residual-Gas-Ionization Beam Profile Monitors in RHIC”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM010, pp. 116-118.
- Y. Li et al., “CesrTA Vacuum System Modifications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP005, pp. 357-359.
- J. S. Sokolowski, M. Birk, P. H. Ceperley, H. F. Glavish, S. S. Hanna, and M. Samuel, “Status Report on Stanford's Superconducting Heavy Ion Linac Project”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1141-1144.
- F. Saeidi, Z. Azami, E. Ahmadi, K. Noori, and A. Tafrihi, “Conceptual design of multipole injection kicker magnets for the ILSF storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM039, pp. 3643-3645.
- D. Mihailescu Stoica, D. Domont-Yankulova, H. Klingbeil, and D. E. M. Lens, “On the Impact of Empty Buckets on the Ferrite Cavity Control Loop Dynamics in High Intensity Hadron Synchrotrons”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3954-3956.
- M. Eriksson et al., “Challenge of MAX IV Towards a Multi-Purpose Highly Brilliant Light Source”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOBS4, pp. 737-741.
- C. C. Hall et al., “Study of CSR Effects in the Jefferson Laboratory FEL Driver”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO27, pp. 58-62.
- C. C. Hall, S. Biedron, and S. V. Milton, “Study of 2D CSR Effects in a Compression Chicane”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1181-1183.
- S. Kazakov et al., “Fast L-band Waveguide Phase Shifter”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP093, pp. 769-771.
- A. Favale, “The Transfer of Accelerator Technology to Industry”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH2-01, pp. 587-590.
- J. L. Abelleira, R. Tomas, F. Zimmermann, and H. Garcia, “Final-Focus Optics for the LHeC Electron Beam Line”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR023, pp. 1861-1863.
- V. S. Skachkov, “A Variable Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B17, pp. 2122-2124.
- S. Nakata and C. Tsukishima, “Design of the Injection System by Half Resonance into a Superconducting Electron Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 260-263.
- A. V. Pavlenko, A. M. Batrakov, and I. V. Ilyin, “Electronics for Precise Measurements of Accelerator Pulsed Magnets”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA033, pp. 3216-3218.
- S. A. Belomestnykh et al., “Superconducting 112 MHz QWR Electron Gun”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO054, pp. 223-225.
- J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
- S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz, 550 kW Pulsed Klystron for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE019, pp. 1122-1124.
- D. E. Johnson, “Design of the Main Injector Extraction Beamlines”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA69, pp. 1243-1245.
- B. K. Scheidt, “Detailled Experience of Synchrotron Light Extraction System with Slotted Mirror at the ESRF”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM001, pp. XX-XX.
- G. Velev et al., “Fermilab Superconducting Nb?Sn High Field Magnet R&D Program”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4338-4341.
- M. J. P. Adam and C. Bodnarchuk, “Combined Fixed Mask, Photon Shutter, Safety Shutter, and Collimator Design for BXDS IVU at the CLS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 309-311.
- S. V. Shchelkunov, J. L. Hirshfield, S. Kazakov, N. Solyak, V. P. Yakovlev, and V. E. Teryaev, “High-Power Low-Voltage Multi-Beam Klystrons for ILC and Project-X”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO19, pp. 978-980.
- A. Rijllart et al., “Industrial Controls for Test Systems From Superconducting Strands TILL Magnet Fiducialisation In the Tunnel for the LHC Project”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_005.
- D. D. Cosic and M. Vi, “Experiment Automation Using EPICS”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 625-627.
- P. Lebrun, L. Michelotti, and J.-F. Ostiguy, “Recent Studies of Dispersion Matched Steering for the ILC Bunch Compressor and Main Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN104, pp. 2954-2956.
- V. Talanov and M. Wohlmuther, “Numerical and Experimental Study for the Characterization of the Spallation Target Performance of the Ultracold Neutron Source at the Paul Scherrer Institut”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO085, pp. 3960-3962.
- V. K. Grishin et al., “X-Ray Radiation by Relativistic Electrons in Condensed Media on Base of MSU Race-Track Microtron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAG12, pp. 105-106.
- T. Nakanishi et al., “High Polarization and High Quantum Efficiency Cathode Research for Electron-Positron Linear Colliders (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-09, pp. 378-380.
- N. E. Vinogradov et al., “Development of Room Temperature Accelerating Structures for the RIA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB030, pp. 2790-2792.
- S. Lidia, F. Sannibale, J. Staples, S. Virostek, and R. Wells, “Development of a High-Brightness VHF Electron Source at LBNL”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 22, pp. 37-40.
- J. W. Rathke, T. J. Schultheiss, P. N. Ostroumov, A. A. Kolomiets, and D. L. Schrage, “Preliminary Engineering Design of A 57.5 MHz CW RFQ for The RIA Driver LINAC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU466, pp. 467-469.
- S. Ano et al., “First Beam Test Result of RFQ Electric Tune Controller at HIMAC Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP22H, pp. 1330-1332.
- Z. Izaola, M. Eguiraun, M. del Campo, and I. Bustinduy, “Implementation of a Workflow Model to Store and Analyze Measured Data at the ESS-Bilbao Ion Source Test Stand”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC168, pp. 2376-2378.
- J. T. M. Chrin and M. C. Sloan, “CAFE, A Modern C++ Interface to the EPICS Channel Access Library”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS024, pp. 840-843.
- W. Bartmann, J. L. Abelleira, K. Hanke, and M. Kowalska, “Upgrades of the CERN PS Booster Ejection Lines”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 858-860.
- W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925.
- I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX.
- K. Gross and J. Adamy, “Comparison of LLRF Control Approaches for High Intensity Hadron Synchrotrons: Design and Performance”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC076, pp. 3464-3466.
Back to search