Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. S. Alimov et al., “BEAM PARAMETERS MEASUREMENT OF TECHNOLOGICAL 10 MEV LINAC”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH11, pp. XX-XX.
[n] T. Weilbach, K. Aulenbacher, and M. W. Bruker, “Beam Profile Measurement for High Intensity Electron Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA022, pp. 118-120.
[n] J. D. Jarvis, C. A. Brau, J. L. Davidson, N. Ghosh, B. L. Ivanov, and J. L. Kohler, “Resonant Tunneling and Extreme Brightness from Diamond Field Emitters and Carbon Nanotubes”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB46, pp. 504-507.
[n] P. N. Koufalis et al., “Impurity Doping of Superconducting Radio Frequency Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3195-3197. doi:10.18429/JACoW-IPAC2016-THOBB02
[n] M. F. Vorogushin et al., “LINEAR ELECTRON ACCELERATORS FOR RADIATION PROCESSING. CURRENT STATUS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THJO04, pp. XX-XX.
[n] F. C. Arrayo, A. C. Lira, L. H. Oliveira, D. Wisnivesky, and A. R. da Silva, “Power Supply System for the LNLS Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP092G, pp. 2349-2351.
[n] P. J. Van Arsdall, R. Bryant, R. Carey, D. Casavant, L. Lagin, and R. Patterson, “Status of the National Ignition Facility and Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O1_002.
[n] U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
[n] K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3815-3818. doi:10.18429/JACoW-IPAC2017-THPAB047
[n] A. Gover and A. Nause, “Computational Model Analysis for Experimental Observation of Optical Current Noise Suppression below the Shot-Noise Limit”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB05, pp. 451-454.
[n] D. Dong and J. Y. Dong, “Research of the Electro-Gravitational Induction by Using COD Signals in Charged Particle Storage Rings”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 719-720. doi:10.18429/JACoW-IPAC2017-MOPIK080
[n] W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2418-2420. doi:10.18429/JACoW-IPAC2017-TUPVA136
[n] X. Yang et al., “Tuning Quadrupoles for Brighter and Sharper Ultra-fast Electron Diffraction Imaging”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3571-3573. doi:10.18429/JACoW-IPAC2019-THPMP053
[n] E. Ahmadi, F. Saeidi, and H. Ghasem, “Lattice Design for the ILSF Booster Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA023, pp. 121-123.
[n] L. Y. Ji et al., “The Design and Calculation on the Injection and Central Region for CYCIAE-50”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 39-41. doi:10.18429/JACoW-CYCLOTRONS2019-MOP007
[n] M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848.
[n] E. Sombrowski, A. Petrosyan, K. Rehlich, and W. Sch??tte, “jddd, a State-of-the-art Solution for Control Panel Development”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHAUST04, pp. 1189-1192.
[n] D. Raparia, F. W. Guy, J. W. Hurd, K. Saadatmand, and G. Jamieson, “Beam Diagnostic Layout Requirements for SSCL Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2127-2130.
[n] M. Malard, S. Gustafsson, L. Hablot, J. P. Schapira, and A. Serafini, “AGOR Axial Injection, Using a Positive Light Ion Multicusp Source”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F1-04, pp. 182-185.
[n] W. Blokland, C. F. Luck, A. Rakhman, and N. J. Evans, “Injection Foil Temperature Measurements at the SNS Accelerator”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 104-109. doi:10.18429/JACoW-HB2018-TUP2WE01
[n] R. Chehab et al., “First Results Concerning a Crystal Radiator Dedicated to Positron Production by Photons from Channeled Multi-Gev Electrons”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3093-3096.
[n] M. Shirakata et al., “Slow Extraction Control Using the Digital Feedback System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A03, pp. 1921-1923.
[n] J. Bigolas, S. Getka, S. Kulinski, J. Olszewski, M. Pachan, and E. Plawski, “Practical Solution of High Gradient Accelerating Structure for Low Energy Medical Linear Accelerator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A18, pp. 2518-2520.
[n] A. Taghibi Khotbeh-Sara, F. Ghasemi, H. Khalafi, M. Mohseni Kejani, and F. Rahmani, “Feasibility Study on Mo-99 Production Using Hybrid Method Based on High Power Electron Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3462-3465. doi:10.18429/JACoW-IPAC2019-THPMP008
[n] R. M. Caliari, L. M. P. Rodrigues, C. H. Tho, and H. G. P. de Oliveira, “Multipurpose Vacuum Chamber - Automation, Interlock-System and Self-Operating Vacuum Routines”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 41-44. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO20
[n] W. Zhu, T. M. Antonsen, J. Mizrahi, G. S. Nusinovich, and G. Sharon, “Temperature and Stress Rise Induced by Cracks in Accelerating Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP100, pp. 1529-1531.
[n] O. Bagnato, R. Defavari, F. Francisco, and D. Kakizaki, “Mechanical characterization of the BPMs brazing interface for Sirius storage ring”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM013, unpublished.
[n] G. Pei et al., “A 10 MeV L-band Linac for Irradiation Applications in China”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB046, pp. 276-278.
[n] I. B. Enchevich and S. A. Korenev, “Ion Source of Discharge Type”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-08, pp. 334-335.
[n] A. R. Donaldson and R. A. Winje, “The NAL Booster Synchrotron Magnet Power Supply Servo”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 409-411.
[n] O. J. Alford, L. R. Bertolini, A. C. Paul, C. C. Shang, and G. A. Westenskow, “The Mechanical Design for the Second Axis Beam Transport Line for the DARHT Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP125, pp. 3251-3253.
For LaTeX
Use Complete Form
For BibTeX
References
- A. S. Alimov et al., “BEAM PARAMETERS MEASUREMENT OF TECHNOLOGICAL 10 MEV LINAC”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH11, pp. XX-XX.
- T. Weilbach, K. Aulenbacher, and M. W. Bruker, “Beam Profile Measurement for High Intensity Electron Beams”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA022, pp. 118-120.
- J. D. Jarvis, C. A. Brau, J. L. Davidson, N. Ghosh, B. L. Ivanov, and J. L. Kohler, “Resonant Tunneling and Extreme Brightness from Diamond Field Emitters and Carbon Nanotubes”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB46, pp. 504-507.
- P. N. Koufalis et al., “Impurity Doping of Superconducting Radio Frequency Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3195-3197.
- M. F. Vorogushin et al., “LINEAR ELECTRON ACCELERATORS FOR RADIATION PROCESSING. CURRENT STATUS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THJO04, pp. XX-XX.
- F. C. Arrayo, A. C. Lira, L. H. Oliveira, D. Wisnivesky, and A. R. da Silva, “Power Supply System for the LNLS Magnets”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP092G, pp. 2349-2351.
- P. J. Van Arsdall, R. Bryant, R. Carey, D. Casavant, L. Lagin, and R. Patterson, “Status of the National Ignition Facility and Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O1_002.
- U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
- K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3815-3818.
- A. Gover and A. Nause, “Computational Model Analysis for Experimental Observation of Optical Current Noise Suppression below the Shot-Noise Limit”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB05, pp. 451-454.
- D. Dong and J. Y. Dong, “Research of the Electro-Gravitational Induction by Using COD Signals in Charged Particle Storage Rings”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 719-720.
- W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2418-2420.
- X. Yang et al., “Tuning Quadrupoles for Brighter and Sharper Ultra-fast Electron Diffraction Imaging”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3571-3573.
- E. Ahmadi, F. Saeidi, and H. Ghasem, “Lattice Design for the ILSF Booster Synchrotron”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA023, pp. 121-123.
- L. Y. Ji et al., “The Design and Calculation on the Injection and Central Region for CYCIAE-50”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 39-41.
- M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848.
- E. Sombrowski, A. Petrosyan, K. Rehlich, and W. Sch??tte, “jddd, a State-of-the-art Solution for Control Panel Development”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THBHAUST04, pp. 1189-1192.
- D. Raparia, F. W. Guy, J. W. Hurd, K. Saadatmand, and G. Jamieson, “Beam Diagnostic Layout Requirements for SSCL Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2127-2130.
- M. Malard, S. Gustafsson, L. Hablot, J. P. Schapira, and A. Serafini, “AGOR Axial Injection, Using a Positive Light Ion Multicusp Source”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F1-04, pp. 182-185.
- W. Blokland, C. F. Luck, A. Rakhman, and N. J. Evans, “Injection Foil Temperature Measurements at the SNS Accelerator”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 104-109.
- R. Chehab et al., “First Results Concerning a Crystal Radiator Dedicated to Positron Production by Photons from Channeled Multi-Gev Electrons”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3093-3096.
- M. Shirakata et al., “Slow Extraction Control Using the Digital Feedback System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A03, pp. 1921-1923.
- J. Bigolas, S. Getka, S. Kulinski, J. Olszewski, M. Pachan, and E. Plawski, “Practical Solution of High Gradient Accelerating Structure for Low Energy Medical Linear Accelerator”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A18, pp. 2518-2520.
- A. Taghibi Khotbeh-Sara, F. Ghasemi, H. Khalafi, M. Mohseni Kejani, and F. Rahmani, “Feasibility Study on Mo-99 Production Using Hybrid Method Based on High Power Electron Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3462-3465.
- R. M. Caliari, L. M. P. Rodrigues, C. H. Tho, and H. G. P. de Oliveira, “Multipurpose Vacuum Chamber - Automation, Interlock-System and Self-Operating Vacuum Routines”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 41-44.
- W. Zhu, T. M. Antonsen, J. Mizrahi, G. S. Nusinovich, and G. Sharon, “Temperature and Stress Rise Induced by Cracks in Accelerating Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP100, pp. 1529-1531.
- O. Bagnato, R. Defavari, F. Francisco, and D. Kakizaki, “Mechanical characterization of the BPMs brazing interface for Sirius storage ring”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM013, unpublished.
- G. Pei et al., “A 10 MeV L-band Linac for Irradiation Applications in China”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB046, pp. 276-278.
- I. B. Enchevich and S. A. Korenev, “Ion Source of Discharge Type”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-08, pp. 334-335.
- A. R. Donaldson and R. A. Winje, “The NAL Booster Synchrotron Magnet Power Supply Servo”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 409-411.
- O. J. Alford, L. R. Bertolini, A. C. Paul, C. C. Shang, and G. A. Westenskow, “The Mechanical Design for the Second Axis Beam Transport Line for the DARHT Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP125, pp. 3251-3253.
Back to search