Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. A. Yucesan, “Machine Learning for Improved Accelerator Health and Reliability”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper THXD1, unpublished.
[n] M. Grecki, J. Branlard, M. Diomede, M. Herrmann, and C. Schmidt, “Optimization of Piezo Operation for superconducting TESLA cavities at EuXFEL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3051-3053. doi:10.18429/JACoW-IPAC2025-THPS040
[n] A. Opanasenko, G. Shamuilov, K. Pepitone, Z. Tibai, and V. Goryashko, “Emittance oscillations and self-compensation during blow-out beam generation”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL186, unpublished.
[n] K. Ziegler, E. Martin, and R. Cohen, “Design Studies for an Ultra-thin Septum Extraction Channel for the Modified NEVIS Synchrocyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C07, pp. XX-XX.
[n] C. Gaspar et al., “Configuring and Automating an LHC Experiment for Faster and Better Physics Output”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1233-1239. doi:10.18429/JACoW-ICALEPCS2017-THDPL01
[n] W. Merz, R. Flood, E. J. Martin, and M. O'Sullivan, “Early Operating and Reliability Experience with the CEBAF DC Magnet Power Supplies”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP13, pp. 1991-1993.
[n] S. Kwon and S. C. Won, “Gateway for Inter-Network Connection in the Pohang Light Source Control System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1832-1835.
[n] V. V. Kushin and S. V. Plotnikov, “Space Lattice Focusing: On the Way to Extremely Low Accelerated Beam Divergence”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA75, pp. 3564-3566.
[n] T.-C. Tseng et al., “A vibrating wire system for multipole magnets alignment in TPS”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2529-2531. doi:10.18429/JACoW-IPAC2025-THPB014
[n] S. L. Smith, J. Jones, and H. L. Owen, “Optimisation of the DIAMOND Storage Ring Lattice”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE003, pp. 751-753.
[n] V. A. Azhippo et al., “Operation of a 300 MeV Electron Linac in the Short-Beam Mode”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-49, pp. 563-565.
[n] H. D. Glass et al., “Permanent Gradient Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P014, pp. 3263-3265.
[n] S. C. Richter et al., “Bending Radius Limits of Different Coated REBCO Conductor Tapes - An Experimental Investigation with Regard to HTS Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3837-3840. doi:10.18429/JACoW-IPAC2021-THPAB042
[n] J. Pivarc and A. Tikhomirov, “Some Remarks to One Self - Neutralization Model of Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH103, pp. 1909-1911.
[n] R. Lange, G. Knap, and K. Shroff, “A shared virtual machine framework for EPICS hands-on training”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper TUPD059, unpublished.
[n] D. Gibbard, J. Castro-Morales, M. Fedorov, M. Paul, and S. Sauter, “Automated testing of the integrated computer control system at the National Ignition Facility”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1854-1857. doi:10.18429/JACoW-ICALEPCS2025-THPD105
[n] J. van Zeijts, S. Witherspoon, and W. A. Watson, “Design and Implementation of a Slow Orbit Control Package at Thomas Jefferson National Accelerator Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P064, pp. 2386-2388.
[n] L. D. Daily et al., “Simulation of High-Average Power Windows for Accelerator Production of Tritium”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4097, pp. 297-299.
[n] A. N. Dovbnya, V. V. Zakutin, V. F. Zhiglo, A. N. Opanasenko, V. P. Romasko, and S. A. Cherenshchikov, “Experimental Studies on Cold Cathode Magnetron Gun”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA15, pp. 938-938.
[n] D. Kang, D. C. Baars, T. R. Bieler, C. Compton, A. Mapar, and F. Pourboghrat, “Study of Slip and Deformation in High Purity Single Crystal Nb for Accelerator Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB045, pp. 191-195.
[n] W. Assmann, “Beam Dynamics in SLC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7B001, pp. 1331-1335.
[n] L. Michelotti and J. A. Holt, “Accelerator Physics Analysis with Interactive Tools”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 80-83.
[n] J. Marcou, R. R. I. Bosworth, R. Clarken, P. Martin, and A. Moll, “ASCI: A Compute Platform for Researchers at the Australian Synchrotron”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1455-1456. doi:10.18429/JACoW-ICALEPCS2017-THPHA042
[n] J. Pivarc, “Design of ECR Ion Source Vacuum Systems”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3894-3897.
[n] J. Pivarc and M. N. El-Shazly, “Some Remarks to Construction of ECR Ion Source Hexapoles”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA7, pp. 1896-1898.
[n] D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
[n] W. J. Gallagher, “Lenses for High Energy Electron Beams”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 277-279.
[n] M. G and T. E. Levens, “An LHC Protection System Based on Fast Beam Intensity Drops”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 387-390. doi:10.18429/JACoW-IBIC2022-WEP06
[n] F. Fl?®cher, J. Halbritter, R. Hietschold, P. Kneisel, L. List, and O. Stoltz, “Q-Measurements in Superconducting Lead Cavities at 800 MHz”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper H-7, pp. 770-773.
[n] B. Y. Chen et al., “APPLICATION PROGRAMS FOR TPS BEAM TRIP ANALYSIS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4032-4034. doi:10.18429/JACoW-IPAC2019-THPRB091
[n] C.-K. Chan et al., “An IGBT pulser for the nonlinear in-vacuum kicker at Taiwan Photon Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 72-74. doi:10.18429/JACoW-IPAC2025-MOPB002
For LaTeX
Use Complete Form
For BibTeX
References
- Y. A. Yucesan, “Machine Learning for Improved Accelerator Health and Reliability”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper THXD1, unpublished.
- M. Grecki, J. Branlard, M. Diomede, M. Herrmann, and C. Schmidt, “Optimization of Piezo Operation for superconducting TESLA cavities at EuXFEL”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS040, pp. 3051-3053.
- A. Opanasenko, G. Shamuilov, K. Pepitone, Z. Tibai, and V. Goryashko, “Emittance oscillations and self-compensation during blow-out beam generation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL186, unpublished.
- K. Ziegler, E. Martin, and R. Cohen, “Design Studies for an Ultra-thin Septum Extraction Channel for the Modified NEVIS Synchrocyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C07, pp. XX-XX.
- C. Gaspar et al., “Configuring and Automating an LHC Experiment for Faster and Better Physics Output”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1233-1239.
- W. Merz, R. Flood, E. J. Martin, and M. O'Sullivan, “Early Operating and Reliability Experience with the CEBAF DC Magnet Power Supplies”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPP13, pp. 1991-1993.
- S. Kwon and S. C. Won, “Gateway for Inter-Network Connection in the Pohang Light Source Control System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1832-1835.
- V. V. Kushin and S. V. Plotnikov, “Space Lattice Focusing: On the Way to Extremely Low Accelerated Beam Divergence”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA75, pp. 3564-3566.
- T.-C. Tseng et al., “A vibrating wire system for multipole magnets alignment in TPS”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB014, pp. 2529-2531.
- S. L. Smith, J. Jones, and H. L. Owen, “Optimisation of the DIAMOND Storage Ring Lattice”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE003, pp. 751-753.
- V. A. Azhippo et al., “Operation of a 300 MeV Electron Linac in the Short-Beam Mode”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-49, pp. 563-565.
- H. D. Glass et al., “Permanent Gradient Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P014, pp. 3263-3265.
- S. C. Richter et al., “Bending Radius Limits of Different Coated REBCO Conductor Tapes - An Experimental Investigation with Regard to HTS Undulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3837-3840.
- J. Pivarc and A. Tikhomirov, “Some Remarks to One Self - Neutralization Model of Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH103, pp. 1909-1911.
- R. Lange, G. Knap, and K. Shroff, “A shared virtual machine framework for EPICS hands-on training”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper TUPD059, unpublished.
- D. Gibbard, J. Castro-Morales, M. Fedorov, M. Paul, and S. Sauter, “Automated testing of the integrated computer control system at the National Ignition Facility”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1854-1857.
- J. van Zeijts, S. Witherspoon, and W. A. Watson, “Design and Implementation of a Slow Orbit Control Package at Thomas Jefferson National Accelerator Facility”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P064, pp. 2386-2388.
- L. D. Daily et al., “Simulation of High-Average Power Windows for Accelerator Production of Tritium”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4097, pp. 297-299.
- A. N. Dovbnya, V. V. Zakutin, V. F. Zhiglo, A. N. Opanasenko, V. P. Romasko, and S. A. Cherenshchikov, “Experimental Studies on Cold Cathode Magnetron Gun”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA15, pp. 938-938.
- D. Kang, D. C. Baars, T. R. Bieler, C. Compton, A. Mapar, and F. Pourboghrat, “Study of Slip and Deformation in High Purity Single Crystal Nb for Accelerator Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB045, pp. 191-195.
- W. Assmann, “Beam Dynamics in SLC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7B001, pp. 1331-1335.
- L. Michelotti and J. A. Holt, “Accelerator Physics Analysis with Interactive Tools”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 80-83.
- J. Marcou, R. R. I. Bosworth, R. Clarken, P. Martin, and A. Moll, “ASCI: A Compute Platform for Researchers at the Australian Synchrotron”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1455-1456.
- J. Pivarc, “Design of ECR Ion Source Vacuum Systems”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3894-3897.
- J. Pivarc and M. N. El-Shazly, “Some Remarks to Construction of ECR Ion Source Hexapoles”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA7, pp. 1896-1898.
- D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
- W. J. Gallagher, “Lenses for High Energy Electron Beams”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 277-279.
- M. G and T. E. Levens, “An LHC Protection System Based on Fast Beam Intensity Drops”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 387-390.
- F. Fl?®cher, J. Halbritter, R. Hietschold, P. Kneisel, L. List, and O. Stoltz, “Q-Measurements in Superconducting Lead Cavities at 800 MHz”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper H-7, pp. 770-773.
- B. Y. Chen et al., “APPLICATION PROGRAMS FOR TPS BEAM TRIP ANALYSIS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4032-4034.
- C.-K. Chan et al., “An IGBT pulser for the nonlinear in-vacuum kicker at Taiwan Photon Source”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB002, pp. 72-74.
Back to search