JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Chen, Y. B. Leng, L. Y. Yu, and N. Zhang, “The Removal of Interference Noise of ICT using the PCA Method”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 22-25. doi:10.18429/JACoW-IBIC2018-MOOC03
[n]	G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE016, pp. 1972-1974. 
[n]	M. Vidmar, “Noise in Radio/Optical Communications”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 1-5. doi:10.18429/JACoW-IBIC2018-MOOA02
[n]	C. Kwankasem and S. Chunjarean, “Storage Ring Beam Dynamics Modeling with Limited Instrumentation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP029, pp. 4369-4371. 
[n]	M. Cargnelutti and K. B. Scheidt, “Commissioning Results of the New BPM Electronics of the ESRF Booster Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 24-27. doi:10.18429/JACoW-IPAC2015-MOAB3
[n]	J. Pfingstner, E. Adli, C. A. Lindstrom, E. Marin, and D. Schulte, “Considerations for a Drive Beam Scheme for a Plasma Wakefield Linear Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2565-2568. doi:10.18429/JACoW-IPAC2016-WEPMY010
[n]	G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896. 
[n]	F. Bulos et al., “Design of a High Yield Position Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1832-1835. 
[n]	J. B. Strait et al., “Towards a New LHC Interaction Region Design for a Luminosity Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPA006, pp. 42-44. 
[n]	N. Pichoff et al., “The SARAF-LINAC Project Status”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 38-40. doi:10.18429/JACoW-LINAC2016-MOOP01
[n]	S. Chunjarean and S. Shin, “Insertion Devices and Beam Dynamics in the PLS-II Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC072, pp. 2187-2189. 
[n]	D. Chirpaz-Cerbat et al., “Status of the ESS RFQ”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 974-976. doi:10.18429/JACoW-IPAC2016-MOPOY054
[n]	C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2561-2564. doi:10.18429/JACoW-IPAC2016-WEPMY009
[n]	K. Noda et al., “New Treatment Research Facility Project at HIMAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOCRA01, pp. 1324-1326. 
[n]	J. Bae et al., “Multi-photon Photoemission and Ultrafast Electron Heating in Cu Photocathodes at Threshold”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1593-1596. doi:10.18429/JACoW-IPAC2018-TUPML026
[n]	J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 304-308. doi:10.18429/JACoW-MEDSI2016-WECA07
[n]	E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 196-199. doi:10.18429/JACoW-IPAC2018-MOPMF043
[n]	S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724. 
[n]	N. Pichoff et al., “Discussion on SARAF-LINAC Cryomodules”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 80-82. doi:10.18429/JACoW-HB2018-TUA2WC01
[n]	I. Haber et al., “Computer Simulation of the UMER Electron Gun”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH045, pp. 2952-2954. 
[n]	Y. Iwata et al., “Superconducting Gantry and Other Developments at HIMAC”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper FRXB1, pp. 1463-1467. 
[n]	T. Plettner et al., “Progress of the Laser Electron Accelerator Project at Stanford University”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC003, pp. 108-110. 
[n]	J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 152-155. doi:10.18429/JACoW-MEDSI2016-TUPE01
[n]	S. Chunjarean, C.-S. Hwang, J. C. Jan, F.-Y. Lin, and P. H. Lin, “Field Optimization in Superconducting Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP079, pp. 2450-2452. 
[n]	A. Gotz, J. M. Chaize, and A. Delorme, “TANGO Steps Toward Industry”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC078, pp. 277-280. 
[n]	E. Colby, C. D. Barnes, and C. M. Sears, “An Electron Source for a Laser Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB026, pp. 2101-2103. 
[n]	N. Fuster-Martinez et al., “Realistic Beam Halo Model study in the Extraction Line of ATF2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2038-2041. doi:10.18429/JACoW-IPAC2015-TUPTY019
[n]	Y. Hashimoto et al., “Development of a Beam Profile Monitor using a Nitrogen-Molecular Jet for the J-PARC MR”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF17, pp. 848-851. 
[n]	B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3321-3323. doi:10.18429/JACoW-IPAC2015-WEPTY026
[n]	D. J. Butler and J. H. Kelly, “Design of the Diamond Light Source DMM for the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 420-424. doi:10.18429/JACoW-MEDSI2016-FRBA03
[n]	A. Shkvarunets, D. W. Feldman, J. Harris, J. Neumann, P. G. O'Shea, and R. Fiorito, “The Application of OTR-ODR Interferometry to the Measurement of the Divergence of Low Energy Electron Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH028, pp. 1285-1287. 
[n]	D. T. Palmer et al., “ORION: An Advanced Accelerator Facility at SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH068, pp. 2251-2253. 
[n]	A. D. McInturff et al., “The Fermilab Collider DOslash Low /beta System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1264-1267. 
[n]	S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n]	J. D. O et al., “BART: Development of a Sample Exchange System for MX Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1919-1922. doi:10.18429/JACoW-ICALEPCS2017-THPHA200
[n]	Y. Hashimoto et al., “Development of a Nondestructive Beam Profile Monitor using a Sheeted Nitrogen-molecular Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE014, pp. 987-989. 
[n]	A. Gotz et al., “TANGO Heads for Industry”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1195-1200. doi:10.18429/JACoW-ICALEPCS2017-THCPL05
[n]	T. Chanwattana et al., “Update on Injector for the New Synchrotron Light Source in Thailand”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 435-437. doi:10.18429/JACoW-IPAC2021-MOPAB120
[n]	Y. Hashimoto et al., “Multi-Ribbon Profile Monitor Using Carbon Graphite Foil for J-PARC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2A01, pp. 429-433. 
[n]	R. M. Bodenstein, P. Burrows, and E. Marin, “Challenges and Status of Tuning Simulations for CLIC Traditional Beam Delivery System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 412-414. doi:10.18429/JACoW-IPAC2018-MOPML010
[n]	N. V. Mokhov and J. B. Strait, “Towards the Optimal LHC Interaction Region: Beam-Induced Energy Deposition”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P019, pp. 124-126. 
[n]	N. V. Mokhov, J. S. Kerby, I. L. Rakhno, and J. B. Strait, “Mitigation of Effects of Beam-Induced Energy Deposition in the LHC High-Luminosity Interaction Regions”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB064, pp. 1745-1747. 
[n]	F.-J. Decker et al., “Performance Improvements of the SLAC Linac for the FACET Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO068, pp. 2021-2023. 
[n]	Y. Arakida et al., “H- Painting Injection for the JHF 3-GeV Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23C, pp. 2103-2105. 
[n]	R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211. 
[n]	K. Noda et al., “Recent Progress on HIMAC for Carbon Therapy”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GAI02, pp. 3137-3141. 
[n]	N. Simos, H. G. Kirk, K. T. McDonald, N. V. Mokhov, J. G. O Conor, and L. P. Trung, “Experimental Studies of Targets and Collimators for High Intensity Beams”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBZ04, pp. 143-149. 
[n]	M. Yadav et al., “Optimization of the Gain Medium Delivery System for an X-Ray Laser Oscillator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 524-527. doi:10.18429/JACoW-IPAC2021-MOPAB150
[n]	J. M. Chaize et al., “The ESRF's Extremely Brilliant Source - a 4th Generation Light Source”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 2010-2015. doi:10.18429/JACoW-ICALEPCS2017-FRAPL07
[n]	B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4336-4339. doi:10.18429/JACoW-IPAC2021-THPAB270
[n]	J. J. Song et al., “MM-Wave Cavity/Klystron Developments Using Deep X-Ray Lithography at the Advanced Photon Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E204, pp. 298-300. 
[n]	B. Naranjo et al., “Compton Spectrometer for FACET-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4332-4335. doi:10.18429/JACoW-IPAC2021-THPAB269
[n]	T. Nakatani et al., “The Implementation of the Software Framework in J-PARC/MLF”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THC005, pp. 676-678. 
[n]	N. Majernik et al., “Demonstration FELs Using UC-XFEL Technologies at the SAMURAI Laboratory”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1592-1595. doi:10.18429/JACoW-IPAC2021-TUPAB092
[n]	J. H. Kelly, “Experimental Modal Analysis Vibration Measurement to Inform Engineering Design”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 235-237. doi:10.18429/JACoW-MEDSI2018-WEPH15
[n]	J. J. Song, R. L. Kustom, and J. H. Zhou, “Aperture Coupling Measurement in a Test Chamber for the Advancecd Photon Source (APS)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 922-925. 
[n]	M. Wake et al., “Magnetic Field Properties of SSC Model Dipole Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 333-336. 
[n]	J. J. Song and R. L. Kustom, “RF Impedance Measurement Status for the 7 GeV Advanced Photon Source (APS)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 916-919. 
[n]	K. A. Ralphs and J. W. Handford, “Future Acquisition Architecture Investigations at Diamond”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1241. doi:10.18429/JACoW-ICALEPCS2019-WEPHA060
[n]	G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300. 
[n]	Y. Z. Shao, G. E. Lawler, B. Naranjo, and J. B. Rosenzweig, “Tapered Modular Quadrupole Magnet to Reduce Higher-Order Optical Aberrations”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4429-4431. doi:10.18429/JACoW-IPAC2021-THPAB328
[n]	J. H. Kelly, S. G. Alcock, S. A. Beamish, and D. Crivelli, “The Joy of Vibration Mitigation”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 212-214. doi:10.18429/JACoW-MEDSI2023-WEPPP041
[n]	D. T. Ziemianski and M. P. Nowak, “Ground Motions Measurements for Synchrotron”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 15-16. doi:10.18429/JACoW-MEDSI2016-MOPE07
[n]	R. Xiang et al., “Cathode insertion and transfer system for the LCLS-II-HE SRF Gun”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM044, unpublished. 
[n]	N. Pichoff et al., “The SARAF-LINAC Project 2017 Status”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2194-2196. doi:10.18429/JACoW-IPAC2017-TUPVA052
[n]	A. Arai, S. Muto, O. Otomo, S. Satoh, Y. Yasu, and T. Nakatani, “The Hardware and Software of the Data Acquisition System at MLF/J-PARC”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA26, pp. XX-XX. 
[n]	M. Semeraro et al., “Delta Robot 2.0: The Nano-Positioning System for the Hard X-ray Nanoprobe at the Australian Synchrotron.”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper THPPP018, unpublished. 
[n]	R. J. Auger-Williams et al., “Lessons from Using Python GraphQL Libraries to Develop an EPICS PV Server for Web UIs”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 191-195. doi:10.18429/JACoW-ICALEPCS2023-MO4BCO02
[n]	T. Chanwattana, S. Chunjarean, N. Juntong, S. Klinkhieo, K. Manasatitpong, and P. Sudmuang, “Simulation and Optimization of SPS-II Linac”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2590-2593. doi:10.18429/JACoW-IPAC2022-THPOPT014

For LaTeX

Use Complete Form

For BibTeX

References

Back to search