JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. Deboy et al., “Acoustic Measurements in the Collimation Region of the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ031, pp. 3759-3761. 
[n]	V. P. Sarantsev, “Investigations on New Acceleration Schemes in Dubna”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 461-464. 
[n]	I. Bogdanov et al., “QUENCH PROCESS IN FAST-CYCLING SUPERCONDUCTING DIPOLE FOR SIS300”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP01, pp. XX-XX. 
[n]	N. Stapley et al., “CERNÔÇÖs SRF Test Stand for Cavity Performance Measurements”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1082-1086. doi:10.18429/JACoW-SRF2019-THP078
[n]	V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX. 
[n]	L. Zhang, “Solid Pulse Transforming Line for DWA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ004, pp. 2769-2771. 
[n]	P. Shcherbakov et al., “MAGNETIC PROPERTIES OF SILICON ELECTRICAL STEELS AND ITS APPLICATION IN FAST CYCLING SUPERCONDUCTING MAGNETS AT LOW TEMPERATURES”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP03, pp. XX-XX. 
[n]	P. Faugeras, A. Faugier, J. Gareyte, and A. Hilaire, “Second Order Effects in the Sextupole-Corrected SPS Lattice”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3577-3580. 
[n]	N. C. Shipman et al., “A Ferroelectric Fast Reactive Tuner for Superconducting Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 781-788. doi:10.18429/JACoW-SRF2019-WETEB7
[n]	P. Wang, H. B. Chen, Q. Gao, J. Shi, and L. Zhang, “Measurement of Cell-Cell Coupling Coefficient in Photocathode RF Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2963-2966. doi:10.18429/JACoW-IPAC2015-WEPMN018
[n]	R. Bailey et al., “High Luminosity Performance of the SPS Protron-Antiproton Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1722-1725. 
[n]	M. T. Lynch, D. Keffeler, D. Rees, W. Roybal, and J. Sheikh, “Installation and Test Results of a High-Power, CW Klystrode Amplifier at Los Alamos National Laboratory”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-37, pp. 451-453. 
[n]	A. I. Blokhin, I. I. Degtyarev, A. E. Lokhovitskii, M. A. Maslov, and I. A. Yazynin, “RTS&T Monte-Carlo Code (Facilities and Computation Methods)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P121, pp. 258-260. 
[n]	K. Chow et al., “Design and Fabrication of Racetrack Coil Accelerator Magnets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP23F, pp. 2026-2028. 
[n]	I. I. Degtyarev, O. A. Liashenko, I. A. Yazynin, A. I. Blokhin, and V. I. Belyakov-Bodin, “Calculational Estimations of Neutron Yield from ADS Target”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH314, pp. 2796-2798. 
[n]	E. Ciapala, R. Keyser, and S. Myers, “The CERN ISR Control Scheme for Acceleration by Phase Displacement”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3395-3398. 
[n]	S. Liu et al., “Status of Diamond Detector Development for Beam Halo Investigation at ATF2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3449-3452. doi:10.18429/JACoW-IPAC2014-THPME092
[n]	R. C. B. Parker, “The Addition of Local Intelligence to the ISR Control System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3392-3395. 
[n]	R. Roux et al., “Experimental Results on the PHIL Photo-injector Test Stand at LAL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB013, pp. 198-200. 
[n]	S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399. 
[n]	S. Myers, “LHC Commissioning and First Operation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOXBMH01, pp. 6-10. 
[n]	C. Benvenuti, D. Boussard, S. Calatroni, E. Chiaveri, and J. T??ckmantel, “Production and Test of 352 MHz Niobium Sputtered Reduced Beta Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D25, pp. 1038-1049. 
[n]	T. Garvey et al., “An Injector for the TESLA Test Facility Linac”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J07, pp. XX-XX. 
[n]	C. M. Celata, A. Faltens, D. L. Judd, L. Smith, and M. G. Tiefenback, “Transverse Combining of Nonrelativistic Beams in a Multiple Beam Induction Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1167-1170. 
[n]	L. Ducimeti re, G. H. Schroeder, J. Uythoven, and E. Vossenberg, “Upgrading of the SPS Injection Kicker System for LHC Requirements”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP20H, pp. 2275-2277. 
[n]	F. Valentini, T. Hakulinen, L. Hammouti, and P. Ninin, “Integration of Heterogeneous Access Control Functionalities Using the New Generation of NI cRIO 903x Controllers”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 424-427. doi:10.18429/JACoW-ICALEPCS2015-MOPGF143
[n]	E. N. Shaposhnikova et al., “Flat Bunches in the LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1413-1415. doi:10.18429/JACoW-IPAC2014-TUPME028
[n]	A. D. Cahill, J. B. Rosenzweig, V. A. Dolgashev, S. G. Tantawi, and S. P. Weathersby, “Ultra High Gradient Breakdown Rates in X-Band Cryogenic Normal Conducting Rf Accelerating Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4395-4398. doi:10.18429/JACoW-IPAC2017-THPIK125
[n]	V. Zubko et al., “HTS Current Lead Optimization”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE007, pp. 2454-2456. 
[n]	K. Cornelis, L. Evans, A. Faugier, A. Hilaire, and R. Schmidt, “Operation of the SPPS Separation Scheme”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 133-136. 
[n]	V. P. Sarantsev, “Collective Accelerator as an Injector of Heavy Ion Accelerating Complex JINR”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WEC0002, pp. 243-249. 
[n]	D. A. Pepler, R. C. Bickerton, and A. J. Tylee, “Developments of the 'Cerberus' Laser Interlock and Hazard Display System and Associated Design Tool”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 59-60. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO26
[n]	L. Tkachenko et al., “Muon Transport Channels with Longitudinal Magnetic Field”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH310, pp. 3627-3629. 
[n]	D. L. Judd, “General Discussion B”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A13, pp. 57-58. 
[n]	A. Miura, Y. Kawane, N. Ouchi, and T. Miyao, “Vacuum Improvement of Bunch Shape Monitor for J-PARC Linac”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD09, pp. 430-434. 
[n]	C. Iselin, J. P. Koutchouk, Y. Marti, and J. Poole, “Implementation of the LEP Optics Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1509-1512. 
[n]	R. C. B. Parker, “The Provision of Telecommunications Links for the LEP Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 79-82. 
[n]	S. Kim, L. Genens, and R. Wehrle, “Vacuum Chamber for an Undulator Straight Section”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1625-1627. 
[n]	D. A. Pepler, “Controls for a 10 Petawatt Class Laser Facility”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD22, pp. 190-191. 
[n]	S. C. Sun et al., “Mechanical Design of a Cryogenic Permanent Magnet Undulator at IHEP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1475-1477. doi:10.18429/JACoW-IPAC2017-TUPAB066
[n]	J. Poole, “Requirements and Trends in the Control of Accelerators”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 332-337. 
[n]	D. L. Judd, “High-Current Heavy-Ion Linacs as Igniters for Commercial-Scale Inertial Fusion Power Plants”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S2-1, pp. 61-65. 
[n]	B. Goddard, M. Gyr, J. Uythoven, R. Veness, and W. Weterings, “LHC Beam Dumping System: Extraction Channel Layout and Acceptance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB009, pp. 1646-1648. 
[n]	S. L. Kramer, E. A. Crosbie, S. Kim, R. Wehrle, and M. Yoon, “Vacuum Chamber Themal Protection for the APS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 586-589. 
[n]	R. Wehrle, S. Kim, and R. Nielsen, “Vacuum System Development Status for the APS Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 583-586. 
[n]	J. T. M. Lyles, S. Archuletta, D. Baca, J. Davis, D. Rees, and P. A. Torrez, “Progress on New High Power RF System for LANSCE DTL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS023, pp. 2382-2384. 
[n]	Z. Chen et al., “Mechanical Design and Fabrication of a New RF Power Amplifier for LANSCE”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP133, pp. 1085-1087. 
[n]	D. Boussard, “Self Focusing in Heavy Ion Linacs”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-03, pp. 96-103. 
[n]	D. L. Judd, “General Discussion C”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A19, pp. 81-83. 
[n]	S. Myers, “The First Two Years of LHC Operation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOXBP01, pp. XX-XX. 
[n]	S. Myers, “Four Decades of Colliders (from the ISR to LEP to the LHC)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPPMH03, pp. 3663-3667. 
[n]	P. Knaus and J. Uythoven, “Transient Thermal Analysis of Intense Proton Beam Loss on a Kicker Magnet Conductor Plate”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B01, pp. 2252-2254. 
[n]	D. J. Nicklaus, L. R. Carmichael, R. Neswold, and Z. Y. Yuan, “Beam Trail Tracking at Fermilab”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 838-840. doi:10.18429/JACoW-ICALEPCS2015-WEPGF061
[n]	J. Koopman et al., “High Resolution Measurements of Lepton Beam Transverse Distributions with the LEP Wire Scanners”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2504-2507. 
[n]	A. Loulergue, C. Bruni, J. Haissinski, M. Jor?®, M. Lacroix, and A. Variola, “A Compact Ring for the ThomX-ray Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE060, pp. 4650-4652. 
[n]	D. Rees and C. Friedrichs, “Increasing Output Power of a 850 MHz Tetrode with a Floating-Deck Modulator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH463, pp. 767-769. 
[n]	G. Arduini et al., “LEP Performance at 91.5 GeV”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP20H, pp. 439-444. 
[n]	D. L. Judd, “The Fluttering, Spiralling Flight of Cyclotron Evolution”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper O-002, pp. XX-XX. 
[n]	G. Concaildi, R. George, S. Marcowitz, R. Nielsen, and R. Wehrle, “External Proton Beam Tune Calculations Including Targets at Consecutive Focil""”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 728-732. 
[n]	K. L. Small et al., “A Comparative Study of Biological Effects of Electrons and Co-60 Gamma Rays on pBR322 Plasmid DNA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3533-3536. doi:10.18429/JACoW-IPAC2019-THPMP041
[n]	R. A. DeHaven, J. Davis, R. Johnson, C. L. Morris, and J. M. O, “Scruncher Phase  Amplitude Control”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-24, pp. 671-673. 
[n]	D. Katonak, J. Bernardin, and S. Hopkins, “Water Purity Development for the Coupled Cavity Linac (CCL) and Drift Tube Linac (DTL) Structures of the Spallation Neutron Source (SNS) Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH097, pp. 1432-1434. 
[n]	R. Esposito et al., “Design of the New CERN nTOF Neutron Spallation Target: R&D and Prototyping Activities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3503-3505. doi:10.18429/JACoW-IPAC2017-WEPVA102
[n]	S. Rimjaem et al., “Physics and Technical Design for the Second High Energy Dispersive Section at PITZ”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD26, pp. 107-109. 
[n]	J. T. M. Lyles et al., “New High Power Test Facility for VHF Power Amplifiers at LANSCE”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP134, pp. 1088-1090. 
[n]	E. Carlier et al., “Design Aspects Related to the Reliability of the Control Architecture of the LHC Beam Dump Kicker Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH213, pp. XX-XX. 
[n]	E. L. Saldin, E. A. Schneidmiller, Yu. N. Ulyanov, and M. V. Yurkov, “Conceptual Study of an FEL Based Gamma-Gamma Collider at TESLA-500”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP005G, pp. 474-476. 
[n]	J. P. Koutchouk and J. Poole, “Data Management for LEP Control”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 683-686. 
[n]	H. Owen, B. Muratori, and P. Williams, “Optics Issues for the 4GLS High-Current ERL”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 14, pp. 19-25. 
[n]	J. L. Coacolo, C. Pagani, and L. Serafini, “TESLA Photo-Injector Simulation Giving High Quality Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP098G, pp. 1289-1291. 
[n]	I. I. Degtyarev, A. I. Blokhin, O. A. Liashenko, F. N. Novoskoltsev, and I. A. Yazynin, “RTS& Code Status”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA026, pp. 92-94. 
[n]	M. J. de Jonge and E. W. Messerschmid, “Measurements of Stacking Efficiency in the CERN Intersecting Storage Rings (ISR)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 796-799. 
[n]	B. Muratori, “Study of Offset Collisions and Beam Adjustment in the LHC Using a Strong-Strong Simulation Model”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI109, pp. 1270-1272. 
[n]	T. Pacey et al., “Recent experimental results from the dielectric wakefield acceleration program at CLARA facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1328-1331. doi:10.18429/JACoW-IPAC2023-TUODB1
[n]	K. L. Small et al., “A Comparative Study of Biological Effects of Electrons and Co-60 Gamma Rays on pBR322 Plasmid DNA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3533-3536. doi:10.18429/JACoW-IPAC2019-THPMP041
[n]	A. A. Pryanichnikov et al., “The PIPLAN Proton-Carbon Ion Radiation Therapy  Planning System”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 179-181. doi:10.18429/JACoW-RuPAC2021-MOPSA40
[n]	S. Myers, “The Performance of LEP and Future Developments”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 13-18. 
[n]	A. Morris, B. Muratori, H. Owen, J. Crone, L. Corner, and P. Williams, “Tunable monochromatic gamma ray source design using Inverse Compton Scattering at Daresbury Laboratory”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1260-1262. doi:10.18429/JACoW-IPAC2023-MOPM126
[n]	H. H. Umstuetter, “Calculations on High Field Magnets with Iron Yokes and Rectangular Coils”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 723-726. 
[n]	J. Poole, “The Database System for LEP Control”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 857-860. 
[n]	D. Rees, D. Keffeler, W. Roybal, and P. J. Tallerico, “Characterization of a Klystrode as a RF Source for High-Average-Power Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ02, pp. 1521-1523. 
[n]	M. Foss, W. Praeg, and K. Thompson, “A Transformer Septum Magnet”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4024-4027. 
[n]	D. A. Pepler, I. O, and P. B. M. Oliveira, “Upgrading the Synchronisation and Trigger Systems on the Vulcan High-Power Nd:glass Laser”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 187-188. doi:10.18429/JACoW-PCaPAC2018-THP12
[n]	L. R. Evans, A. Faugier, and R. Schmidt, “Beam Separation at the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2209-2212. 
[n]	D. Kemp, R. Keyser, and L. Tausch, “Present Status of the Software for Computer Control in the CERN ISR Project”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 407-409. 
[n]	H. H. Lu et al., “Development of a PrFeB Cryogenic Permanent Magnet Undulator (CPMU) Prototype at IHEP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1469-1471. doi:10.18429/JACoW-IPAC2017-TUPAB064
[n]	J. Tückmantel et al., “Improvements to Power Couplers for the LEP2 Superconducting Cavities”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPP12, pp. 1642-1644. 
[n]	B. Muratori, J. Crone, J. Jones, T. Pacey, D. Symes, and H. Owen, “The EPAC electron transport beamline - physics considerations and design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1553-1556. doi:10.18429/JACoW-IPAC2023-TUPA105
[n]	J. McKenzie et al., “Establishing a relativistic ultrafast electron diffraction & imaging (RUEDI) UK national facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2075-2078. doi:10.18429/JACoW-IPAC2023-TUPL144
[n]	M. Foss and W. Praeg, “Shaped Excitation Current for Synchrotron Magnets”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2856-2859. 
[n]	T. Gallagher, A. Wolski, and B. Muratori, “A machine learning approach to shaping magnetic fringe fields for beam dynamics control”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2900-2903. doi:10.18429/JACoW-IPAC2023-WEPA107
[n]	J. T. M. Lyles, S. Archuletta, J. Davis, L. Lopez, and G. Roybal, “Test Results for the New 201.25 MHz Tetrode Power Amplifier at LANSCE”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF058, pp. 1078-1080. 
[n]	D. A. Pepler, I. O, and P. B. M. Oliveira, “Upgrading the Synchronisation and Trigger Systems on the Vulcan High-Power Nd:glass Laser”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 187-188. doi:10.18429/JACoW-PCaPAC2018-THP12
[n]	J. Carson, S. Gourlay, M. J. Lamm, P. M. Mantsch, and A. Riddiford, “Fabrication and Performance of a New High-gradient Trim Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2236-2239. 
[n]	G. O. Bolme, J. T. M. Lyles, J. Davis, D. J. Vigil, S. Archuletta, and L. Lopez, “LANSCE DTL Longitudinal Field Measurements at High Power”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP049, pp. 691-693. 
[n]	J. Jones, B. Hounsell, B. Muratori, and J. McKenzie, “Beam dynamics for the RUEDI microscopy beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2067-2070. doi:10.18429/JACoW-IPAC2023-TUPL142
[n]	B. Goddard, E. Carlier, P. Knaus, and J. Uythoven, “Equipment Protection Issues for Fast Extraction from SPS to LHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH141, pp. 1544-1546. 
[n]	S. Jenzer et al., “Study of the Suitability of 3D Printing for Ultra-High Vacuum Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3356-3358. doi:10.18429/JACoW-IPAC2017-WEPVA043
[n]	M. El Khaldi, J-N. Cayla, M. Diop, H. Monard, and F. Ribeiro, “Characterization of Higher-Order-Modes (HOM) in THOMX Storage Ring RF Cavity”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1513-1515. doi:10.18429/JACoW-IPAC2022-TUPOMS040
[n]	J. Berg et al., “An engineering prototype of a late stage ionization cooling cell for a muon collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2564-2567. doi:10.18429/JACoW-IPAC2024-WEPR34

For LaTeX

Use Complete Form

For BibTeX

References

Back to search