Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. H. Baeta Neves Diniz Santos, “Status of the RFSoC-based Signal Processing for Multi-bunch and Filling Pattern Feedbacks in the SLS 2.0”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 297-300. doi:10.18429/JACoW-IBIC2023-TUP046
[n] R. L. Gluckstern, H. Okamoto, and W. Cheng, “Synchrobetatron Coupling Effects in Alternating Phase Focusing”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 221-224.
[n] J. Szewi et al., “Preliminary Design of LLRF System for Polfel Accelerator”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper TUPV024, unpublished.
[n] Z. Ni, L. Li, J. Liu, J. Luo, and X. Zhou, “Design of a Component-Oriented Distributed Data Integration Model”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 202-205. doi:10.18429/JACoW-ICALEPCS2021-MOPV032
[n] A. Valishev, Y. Alexahin, V. Lebedev, and D. N. Shatilov, “LIFETRAC Code for the Weak-Strong Simulation of the Beam-Beam Effect in Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT084, pp. 4138-4140.
[n] W. B. Li et al., “Digital Longitudinal Bunch-by-bunch Feedback System for the HLS II”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA35, pp. 434-436.
[n] C. Bate, D. Reschke, J. Schaffran, L. Steder, L. Trelle, and H. Weise, “Recent mid-T Single-Cell Treatments R&D at DESY”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 129-134. doi:10.18429/JACoW-SRF2023-MOPMB022
[n] Z. Martí, G. Benedetti, M. Carlà, and U. Iriso, “ALBA beam lifetime optimization using RCDS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3101-3103. doi:10.18429/JACoW-IPAC2023-WEPL002
[n] E. M. Mei, “A novel design of superconducting magnet for ECR ion source”, presented at the ECRIS'24, Darmstadt, Germany, Sep. 2024, paper TUP12, unpublished.
[n] A. M. M. Todd, C. C. Paulson, and S. L. Mendelsohn, “The Neutral Particle Beam Space Experiment (NPBSE) Accelerator Designs”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1774-1777.
[n] X. R. Resende and R. M. Dias, “Magnet Sorting Algorithm Applied to the LNLS EPU”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF004, pp. 303-305.
[n] D. A. Nawaz, M. Ajmal, A. Majid, N. U. Saqib, and F. Sher, “Control System for 30 keV Electron Gun Test Facility”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 433-436. doi:10.18429/JACoW-ICALEPCS2021-TUPV019
[n] C. I. Moore, D. E. Johnson, J. A. Johnstone, T. Kobilarcik, and C. T. Murphy, “Slow Extraction from the Fermilab Main Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH146, pp. 1559-1561.
[n] G. Ha and N. Majernik, “Generation of sawtooth correlation for bunching factor enhancement”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 380-383. doi:10.18429/JACoW-IPAC2024-MOPG38
[n] R. Bartolini et al., “Status of the PETRA IV Machine Project”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1475-1478. doi:10.18429/JACoW-IPAC2022-TUPOMS029
[n] H.-J. Kwon, Y.-S. Cho, J. J. Dang, H. S. Kim, Y. G. Song, and S. P. Yun, “Design of the Secondary Particle Production Beam Line at KOMAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2346-2348. doi:10.18429/JACoW-IPAC2017-TUPVA111
[n] J. Urakawa, S. Araki, T. Kawamoto, T. Mimashi, Y. Otake, and Y. Satoh, “The Development of RF Reference Lines and a Timing System for Japan Linear Collider”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 356-359. doi:10.18429/JACoW-ICALEPCS1991-S10TS04
[n] M. Giannella and G. W. Dodson, “The SNS Central Control Room, Design, and Operational Experience”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB30, pp. XX-XX.
[n] I. A. Ivanenko, G. G. Gulbekyan, I. V. Kalagin, N. Yu. Kazarinov, N. F. Osipov, and V. A. Semin, “Reconstruction of U400M Cyclotron: Upgrade of U400M Cyclotron Magnetic Structure”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1838-1840. doi:10.18429/JACoW-IPAC2021-TUPAB187
[n] K. Kosaentor, E. Kongmon, S. Rimjaem, J. Saisut, and C. Thongbai, “Monte Carlo Simulation of Electron Beam Irradiation System for Natural Rubber Vulcanization”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4747-4749. doi:10.18429/JACoW-IPAC2017-THPVA126
[n] C. J. Joshi, “Survey of Advanced Acceleration Techniques”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TU102, pp. 242-245.
[n] M. M. Paoluzzi et al., “The New 1-18 MHz Wideband RF System for the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3063-3065. doi:10.18429/JACoW-IPAC2019-WEPRB107
[n] Y. F. Yang, Z. Li, P. T. Lin, Z. Q. Ren, and X. M. Wan, “Dynamics Design on 70-250Mev Proton Linac”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 102-104. doi:10.18429/JACoW-SAP2023-TUPB010
[n] P. Collier et al., “Reducing the SPS Machine Impedance”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI082, pp. 1458-1460.
[n] H. L. Hagedoorn, “Invited Paper: Analytical Models for Cyclotron Orbits”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper G01, pp. 271-278.
[n] S. V. Shchelkunov, J. L. Hirshfield, and V. E. Teryaev, “50 kW CW Multi-Beam Klystron”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 717-719. doi:10.18429/JACoW-NAPAC2019-WEPLM53
[n] T. Sieber et al., “Beam Diagnostics Layout for the FAIR Proton Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP063, pp. 998-1000.
[n] H. N. Jungwirth, R. L. Kustom, S. Martin, P. F. Meads, E. Zaplatine, and K. Ziegler, “Design of Fixed Field Alternating Gradient Cyclotrons - FFAG - as Accelerators for Intense Pulsed Proton Beams”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-08, pp. 625-628.
[n] C. Engblom et al., “2D-Nano-Ptychography Imaging Results on the SWING Beamline at Synchrotron SOLEIL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 90. doi:10.18429/JACoW-ICALEPCS2019-MOCPL06
[n] P. T. Lin et al., “The Design of Nonlinear Regenerative Extraction in 250MeV Protron Superconducting Synchrocyclotron”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 123-125. doi:10.18429/JACoW-SAP2023-TUPB018
[n] N. Ito et al., “The R&D Works on the High Intensity Proton Linear Accelerator for Nuclear Waste Transmutation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG09, pp. 339-341.
[n] K. Hock et al., “Upgrade specifications for the booster main magnet power supply”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPS04, unpublished.
[n] Y. P. Sun, “Expediting APS-U Long-Term Particle Tracking with Arbitrary Order Taylor Map”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1505-1507. doi:10.18429/JACoW-IPAC2021-TUPAB062
[n] D. Rees, P. A. Torrez, J. S. Harrison, J. Debaca, W. T. Roybal, and K. Warner, “High-power Circulator Test Results at 350 MHz and 700 MHz”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE06, pp. 980-982.
[n] V. Chouhan, F. Furuta, M. Martinello, T. J. Ring, and G. Wu, “Computational Fluid Dynamic Simulation for Electrolyte Flow in Horizontal EP of Niobium SRF Elliptical Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPTEV014, pp..
[n] T. Takayanagi et al., “Design of the Pulse Bending Magnet for Switching the Painting Area Between the MLF and MR in J-Parc 3-Gev Rcs”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD085, pp. 3293-3295.
[n] Y. Jongen and G. Ryckewaert, “Preliminary Design for a 30 MeV, 500 muA H- Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2703-2706.
[n] T. Takayanagi, K. Horino, and T. Ueno, “Development of a New Modular Switch Using a Next-Generation Semiconductor”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3841-3844. doi:10.18429/JACoW-IPAC2018-THPAL082
[n] C. Mayes, D. Sagan, and H. Slepicka, “PyTao: the Python interface to Tao”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2838-2841. doi:10.18429/JACoW-IPAC2023-WEPA086
[n] P. S. Kallakuri, A. R. Brill, J. Carwardine, and N. Sereno, “Closed Loop Modeling of the APS-U Orbit Feedback System”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 683-686. doi:10.18429/JACoW-NAPAC2019-WEPLM11
[n] S. Shishodia, N. Gupta, and R. Johari, “Electron Acceleration by Self Focused q-Gaussian Laser Pulse in Plasma”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL135, unpublished.
[n] L. Lin, A. C. Lira, P. F. Tavares, and G. Tosin, “Status of the LNLS Booster Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP75, pp. 3125-3127.
For LaTeX
Use Complete Form
For BibTeX
References
- P. H. Baeta Neves Diniz Santos, “Status of the RFSoC-based Signal Processing for Multi-bunch and Filling Pattern Feedbacks in the SLS 2.0”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP046, pp. 297-300.
- R. L. Gluckstern, H. Okamoto, and W. Cheng, “Synchrobetatron Coupling Effects in Alternating Phase Focusing”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 221-224.
- J. Szewi et al., “Preliminary Design of LLRF System for Polfel Accelerator”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper TUPV024, unpublished.
- Z. Ni, L. Li, J. Liu, J. Luo, and X. Zhou, “Design of a Component-Oriented Distributed Data Integration Model”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 202-205.
- A. Valishev, Y. Alexahin, V. Lebedev, and D. N. Shatilov, “LIFETRAC Code for the Weak-Strong Simulation of the Beam-Beam Effect in Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT084, pp. 4138-4140.
- W. B. Li et al., “Digital Longitudinal Bunch-by-bunch Feedback System for the HLS II”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA35, pp. 434-436.
- C. Bate, D. Reschke, J. Schaffran, L. Steder, L. Trelle, and H. Weise, “Recent mid-T Single-Cell Treatments R&D at DESY”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB022, pp. 129-134.
- Z. Martí, G. Benedetti, M. Carlà, and U. Iriso, “ALBA beam lifetime optimization using RCDS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL002, pp. 3101-3103.
- E. M. Mei, “A novel design of superconducting magnet for ECR ion source”, presented at the 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, paper TUP12, unpublished.
- A. M. M. Todd, C. C. Paulson, and S. L. Mendelsohn, “The Neutral Particle Beam Space Experiment (NPBSE) Accelerator Designs”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1774-1777.
- X. R. Resende and R. M. Dias, “Magnet Sorting Algorithm Applied to the LNLS EPU”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF004, pp. 303-305.
- D. A. Nawaz, M. Ajmal, A. Majid, N. U. Saqib, and F. Sher, “Control System for 30 keV Electron Gun Test Facility”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 433-436.
- C. I. Moore, D. E. Johnson, J. A. Johnstone, T. Kobilarcik, and C. T. Murphy, “Slow Extraction from the Fermilab Main Injector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH146, pp. 1559-1561.
- G. Ha and N. Majernik, “Generation of sawtooth correlation for bunching factor enhancement”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG38, pp. 380-383.
- R. Bartolini et al., “Status of the PETRA IV Machine Project”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1475-1478.
- H.-J. Kwon, Y.-S. Cho, J. J. Dang, H. S. Kim, Y. G. Song, and S. P. Yun, “Design of the Secondary Particle Production Beam Line at KOMAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2346-2348.
- J. Urakawa, S. Araki, T. Kawamoto, T. Mimashi, Y. Otake, and Y. Satoh, “The Development of RF Reference Lines and a Timing System for Japan Linear Collider”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S10TS04, pp. 356-359.
- M. Giannella and G. W. Dodson, “The SNS Central Control Room, Design, and Operational Experience”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB30, pp. XX-XX.
- I. A. Ivanenko, G. G. Gulbekyan, I. V. Kalagin, N. Yu. Kazarinov, N. F. Osipov, and V. A. Semin, “Reconstruction of U400M Cyclotron: Upgrade of U400M Cyclotron Magnetic Structure”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1838-1840.
- K. Kosaentor, E. Kongmon, S. Rimjaem, J. Saisut, and C. Thongbai, “Monte Carlo Simulation of Electron Beam Irradiation System for Natural Rubber Vulcanization”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4747-4749.
- C. J. Joshi, “Survey of Advanced Acceleration Techniques”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TU102, pp. 242-245.
- M. M. Paoluzzi et al., “The New 1-18 MHz Wideband RF System for the CERN PS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3063-3065.
- Y. F. Yang, Z. Li, P. T. Lin, Z. Q. Ren, and X. M. Wan, “Dynamics Design on 70-250Mev Proton Linac”, in Proc. 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, pp. 102-104.
- P. Collier et al., “Reducing the SPS Machine Impedance”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI082, pp. 1458-1460.
- H. L. Hagedoorn, “Invited Paper: Analytical Models for Cyclotron Orbits”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper G01, pp. 271-278.
- S. V. Shchelkunov, J. L. Hirshfield, and V. E. Teryaev, “50 kW CW Multi-Beam Klystron”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 717-719.
- T. Sieber et al., “Beam Diagnostics Layout for the FAIR Proton Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP063, pp. 998-1000.
- H. N. Jungwirth, R. L. Kustom, S. Martin, P. F. Meads, E. Zaplatine, and K. Ziegler, “Design of Fixed Field Alternating Gradient Cyclotrons - FFAG - as Accelerators for Intense Pulsed Proton Beams”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper L-08, pp. 625-628.
- C. Engblom et al., “2D-Nano-Ptychography Imaging Results on the SWING Beamline at Synchrotron SOLEIL”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 90.
- P. T. Lin et al., “The Design of Nonlinear Regenerative Extraction in 250MeV Protron Superconducting Synchrocyclotron”, in Proc. 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, pp. 123-125.
- N. Ito et al., “The R&D Works on the High Intensity Proton Linear Accelerator for Nuclear Waste Transmutation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPG09, pp. 339-341.
- K. Hock et al., “Upgrade specifications for the booster main magnet power supply”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS04, unpublished.
- Y. P. Sun, “Expediting APS-U Long-Term Particle Tracking with Arbitrary Order Taylor Map”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1505-1507.
- D. Rees, P. A. Torrez, J. S. Harrison, J. Debaca, W. T. Roybal, and K. Warner, “High-power Circulator Test Results at 350 MHz and 700 MHz”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE06, pp. 980-982.
- V. Chouhan, F. Furuta, M. Martinello, T. J. Ring, and G. Wu, “Computational Fluid Dynamic Simulation for Electrolyte Flow in Horizontal EP of Niobium SRF Elliptical Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper WEPTEV014, pp..
- T. Takayanagi et al., “Design of the Pulse Bending Magnet for Switching the Painting Area Between the MLF and MR in J-Parc 3-Gev Rcs”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD085, pp. 3293-3295.
- Y. Jongen and G. Ryckewaert, “Preliminary Design for a 30 MeV, 500 muA H- Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2703-2706.
- T. Takayanagi, K. Horino, and T. Ueno, “Development of a New Modular Switch Using a Next-Generation Semiconductor”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3841-3844.
- C. Mayes, D. Sagan, and H. Slepicka, “PyTao: the Python interface to Tao”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA086, pp. 2838-2841.
- P. S. Kallakuri, A. R. Brill, J. Carwardine, and N. Sereno, “Closed Loop Modeling of the APS-U Orbit Feedback System”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 683-686.
- S. Shishodia, N. Gupta, and R. Johari, “Electron Acceleration by Self Focused q-Gaussian Laser Pulse in Plasma”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL135, unpublished.
- L. Lin, A. C. Lira, P. F. Tavares, and G. Tosin, “Status of the LNLS Booster Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP75, pp. 3125-3127.
Back to search