Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Mu, E. Cormier, E. Granados, A. Latina, and G. Santarelli, “An Efficient Optimisation of a Burst Mode-Operated Fabry-Perot Cavity for Compton Light Sources”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 46-49. doi:10.18429/JACoW-FLS2023-TU1C1
[n] H. Qu, D. Wu, C. Shi, Z. Yin, Q. Peng, and G. Ni, “SUPERCONDUCTING MAGNET DESIGN FOR BEPC-II INTERACTION REGION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WECM02, pp. XX-XX.
[n] R. B. McKenzie-Wilson, “Design and Fabrication of the BNL Radio Frequency Quadrupole”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2998-3001.
[n] V. Conforti et al., “The small size telescope control system design of the Cherenkov Telescope Array Observatory”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 222-228. doi:10.18429/JACoW-ICALEPCS2025-TUAG002
[n] Y. Iwashita et al., “Creation of Peaks in the Energy Spectrum of Laser-Produced Ions by Phase Rotation”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP028, pp. 97-99.
[n] C. G. Beetham, K. Kohler, C. R. C. B, and J.-B. Ribes, “The Transmission of Accelerator Timing Information around CERN”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 306-309. doi:10.18429/JACoW-ICALEPCS1991-S08NC05
[n] G. J. Silvi et al., “Beam dynamics optimization of EuPRAXIA@SPARC_LAB RF injector”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2739-2742. doi:10.18429/JACoW-IPAC2023-WEPA040
[n] H. V. Smith, P. Allison, J. D. Schneider, J. E. Stelzer, C. Geisik, and D. R. Schmitt, “Initial Operation of the CW 8X H- Ion Source Discharge”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3172-3175.
[n] V. Bondar et al., “Using Grafana as a representation layer for control data at the European XFEL”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD080, unpublished.
[n] T. Satogata, K. Brown, F. Pilat, A. Alai Tafti, S. Tepikian, and J. van Zeijts, “The RHIC/AGS Online Model Environment: Design and Overview”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA48, pp. 2728-2730.
[n] L. G. Sukhikh et al., “FEASIBILITY OF PRE-BUNCHED FEL BASED ON COHERENT DIFFRACTION RADIATION”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUBPH02, pp. XX-XX.
[n] L. T. Sun et al., “First Intense Beam at JUNA 400 kV Underground Accelerator”, presented at the HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, paper FR2I1, unpublished.
[n] L. Nevay et al., “BDSIM v1.7.0 developments for the modelling of accelerators and their environment”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2821-2824. doi:10.18429/JACoW-IPAC2023-WEPA074
[n] J. Santander-Vela, M. Bartolini, M. Miccolis, and N. P. Rees, “From SKA to SKAO: Early Progress in the SKAO Construction”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 14-20. doi:10.18429/JACoW-ICALEPCS2021-MOAL03
[n] M. Kilpatrick, J. Edelen, J. Einstein-Curtis, R. O'Rourke, K. Drees, and M. Valette, “Prediction of superconducting magnet quenches with machine learning”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2889-2891. doi:10.18429/JACoW-IPAC2023-WEPA104
[n] E. Echeverria, A. Galdi, C. Pennington, J. Maxson, M. Hines, and Q. Zhu, “Correlation between the stoichiometry of $Cs_xSb_y$ and its photoemission properties and oxidation response”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA134, unpublished.
[n] P. Andreu Mu??oz et al., “Irradiation of Low-Z Carbon-Based Materials with 440 GeV/c Proton Beam for High Energy & Intensity Beam Absorbers: The CERN HiRadMat-56-HED Experiment”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2883-2886. doi:10.18429/JACoW-IPAC2022-THPOTK049
[n] T. Thuillier, O. Bajeat, A. Leduc, and L. Maunoury, “Angular Distribution Measurement of Atoms Evaporated from a Resistive Oven Applied to Ion Beam Production”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 72-77. doi:10.18429/JACoW-ECRIS2020-TUXZO03
[n] I. Neththikumara et al., “Beam halo formation with different cathode distributions”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 379-383. doi:10.18429/JACoW-NAPAC2025-TUP015
[n] A. Fukasawa et al., “Beam transport and diagnostics for the space plasma experiment at Samurai”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA110, unpublished.
[n] C. Pennington et al., “Ultra thin Cs3Sb photocathodes with anomalously high quantum efficiency”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1605-1607. doi:10.18429/JACoW-IPAC2023-TUPA132
[n] L. T. Stant and T. M. Cobb, “Leveraging Internet of Things Developments for Rapid Prototyping of Synoptic Displays”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 151-155. doi:10.18429/JACoW-PCaPAC2018-THCB4
[n] M. G. Frith et al., “Instrumentation Development, Evaluation & Analysis (IDEA) Beamline for the APS-U”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper MOPC04, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Mu, E. Cormier, E. Granados, A. Latina, and G. Santarelli, “An Efficient Optimisation of a Burst Mode-Operated Fabry-Perot Cavity for Compton Light Sources”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TU1C1, pp. 46-49.
- H. Qu, D. Wu, C. Shi, Z. Yin, Q. Peng, and G. Ni, “SUPERCONDUCTING MAGNET DESIGN FOR BEPC-II INTERACTION REGION”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WECM02, pp. XX-XX.
- R. B. McKenzie-Wilson, “Design and Fabrication of the BNL Radio Frequency Quadrupole”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2998-3001.
- V. Conforti et al., “The small size telescope control system design of the Cherenkov Telescope Array Observatory”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 222-228.
- Y. Iwashita et al., “Creation of Peaks in the Energy Spectrum of Laser-Produced Ions by Phase Rotation”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP028, pp. 97-99.
- C. G. Beetham, K. Kohler, C. R. C. B, and J.-B. Ribes, “The Transmission of Accelerator Timing Information around CERN”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S08NC05, pp. 306-309.
- G. J. Silvi et al., “Beam dynamics optimization of EuPRAXIA@SPARC_LAB RF injector”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA040, pp. 2739-2742.
- H. V. Smith, P. Allison, J. D. Schneider, J. E. Stelzer, C. Geisik, and D. R. Schmitt, “Initial Operation of the CW 8X H- Ion Source Discharge”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3172-3175.
- V. Bondar et al., “Using Grafana as a representation layer for control data at the European XFEL”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD080, unpublished.
- T. Satogata, K. Brown, F. Pilat, A. Alai Tafti, S. Tepikian, and J. van Zeijts, “The RHIC/AGS Online Model Environment: Design and Overview”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA48, pp. 2728-2730.
- L. G. Sukhikh et al., “FEASIBILITY OF PRE-BUNCHED FEL BASED ON COHERENT DIFFRACTION RADIATION”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUBPH02, pp. XX-XX.
- L. T. Sun et al., “First Intense Beam at JUNA 400 kV Underground Accelerator”, presented at the 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, paper FR2I1, unpublished.
- L. Nevay et al., “BDSIM v1.7.0 developments for the modelling of accelerators and their environment”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA074, pp. 2821-2824.
- J. Santander-Vela, M. Bartolini, M. Miccolis, and N. P. Rees, “From SKA to SKAO: Early Progress in the SKAO Construction”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 14-20.
- M. Kilpatrick, J. Edelen, J. Einstein-Curtis, R. O'Rourke, K. Drees, and M. Valette, “Prediction of superconducting magnet quenches with machine learning”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA104, pp. 2889-2891.
- E. Echeverria, A. Galdi, C. Pennington, J. Maxson, M. Hines, and Q. Zhu, “Correlation between the stoichiometry of $Cs_xSb_y$ and its photoemission properties and oxidation response”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA134, unpublished.
- P. Andreu Mu??oz et al., “Irradiation of Low-Z Carbon-Based Materials with 440 GeV/c Proton Beam for High Energy & Intensity Beam Absorbers: The CERN HiRadMat-56-HED Experiment”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2883-2886.
- T. Thuillier, O. Bajeat, A. Leduc, and L. Maunoury, “Angular Distribution Measurement of Atoms Evaporated from a Resistive Oven Applied to Ion Beam Production”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper TUXZO03, pp. 72-77.
- I. Neththikumara et al., “Beam halo formation with different cathode distributions”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 379-383.
- A. Fukasawa et al., “Beam transport and diagnostics for the space plasma experiment at Samurai”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA110, unpublished.
- C. Pennington et al., “Ultra thin Cs3Sb photocathodes with anomalously high quantum efficiency”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA132, pp. 1605-1607.
- L. T. Stant and T. M. Cobb, “Leveraging Internet of Things Developments for Rapid Prototyping of Synoptic Displays”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 151-155.
- M. G. Frith et al., “Instrumentation Development, Evaluation & Analysis (IDEA) Beamline for the APS-U”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper MOPC04, pp. XX-XX.
Back to search
