Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Quispe et al., “Assessment of the Corrosion of Copper Components in the Water Cooling System of ALBA Synchrotron Light Source; Presentation of a Proposal to Mitigate the Corrosion Rate of Copper”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 171. doi:10.18429/JACoW-MEDSI2020-TUPB12
[n] M. King et al., “Optical beam loss monitor installed at the SPS slow extraction region”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 86-90. doi:10.18429/JACoW-IBIC2025-MOPCO11
[n] A. Fedotov, D. Kayran, S. Seletskiy, J. Kewisch, Y. Jing, and G. Wang, “Accelerator physics requirements and challenges of RF based electron cooler for EIC injection energy”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 346-350. doi:10.18429/JACoW-NAPAC2025-TUP003
[n] M. J. Lee, “GLAD: A Generic Lattice Debugger”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 566-569. doi:10.18429/JACoW-ICALEPCS1991-S17AIA03
[n] Z. A. Conway et al., “Low-level RF control of microphonics in superconducting spoke-loaded cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP67, pp. XX-XX.
[n] L. Celona et al., “Status of the AISHa Ion Source at INFN-LNS”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 10-12. doi:10.18429/JACoW-ECRIS2020-MOWZO03
[n] A. Santamaria Garcia, A. Eichler, S. Hirlaender, J. Kaiser, and C. Xu, “Reinforcement learning in particle accelerators”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2481-2486. doi:10.18429/JACoW-IPAC2025-THYD1
[n] M. Sangroula et al., “Design of a BPM pick-up for the EIC electron storage ring”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 163-167. doi:10.18429/JACoW-NAPAC2025-MOP052
[n] L. Corner, L. J. Nevay, and R. Walczak, “A High Power Fibre Laser for Electron Beam Emittance Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD058, pp. 3227-3229.
[n] K. W. Shepard, “The RIA Driver Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH301, pp. 596-599.
[n] A. Augustinus, P. Ch. Chochula, L. S. Jirden, and L. W. Wallet, “Standard Device Control via PVSS Object Libraries in ALICE”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA22, pp. 135-137.
[n] H. Li et al., “The Integration and RF Conditioning of the ESS Double-Spoke Prototype Cryomodule at FREIA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2952-2955. doi:10.18429/JACoW-IPAC2019-WEPRB061
[n] A. Nicoletti and M. Martino, “Data-Driven Controller Design for High Precision Pulsed Power Converters for Bumper Magnets of the PS Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1928-1930. doi:10.18429/JACoW-IPAC2017-TUPIK096
[n] V. Chouhan et al., “Vertical Electropolishing of Nb Coupon Cavity and Surface Study of the Coupon Samples”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP098, pp. 1080-1083.
[n] J. O. Ortola Vidal and M. Vazquez Mu, “Integration of New Siemens S7-1500 PLC Family in UNICOS-CPC: Engineering Challenges and Performance Evaluation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1363. doi:10.18429/JACoW-ICALEPCS2019-WEPHA114
[n] V. P. Yakovlev et al., “Nonlinear Effects in Ferrite Tuned Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 877-880.
[n] Y. S. Cho, K. S. Kim, H. H. Lee, B. H. Choi, and J. M. Han, “LLRF SYSTEM FOR THE KTF RFQ LINAC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP015, pp. XX-XX.
[n] T. von Witzleben et al., “Beam dynamics for concurrent operation of the LHeC and the HL-LHC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 151-154. doi:10.18429/JACoW-IPAC2023-MOPA054
[n] W. Kaabi et al., “PERLE: a novel facility for ERL development and applications in multi-turn configuration and high-power regime”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEOGC3, unpublished.
[n] A. Blednykh et al., “EIC impedance and beam dynamics”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3094-3097. doi:10.18429/JACoW-IPAC2024-THPC45
[n] D. Kayran, A. V. Fedotov, and S. Seletskiy, “Applying the Low Energy RHIC Electron Cooler (LEReC) Concept to the High Energy Coolers”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper THBP26, unpublished.
[n] K. Deitrick, “Microbunching gain evaluation of bunch stretcher designs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2774-2776. doi:10.18429/JACoW-IPAC2023-WEPA051
[n] E. Simakov et al., “Status of the CARIE high gradient photocathode test facility at LANL”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2101-2104. doi:10.18429/JACoW-IPAC2024-WEPC60
[n] R. Nietubyc et al., “Magnetic lattice of PolFEL linac”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL137, unpublished.
[n] T. H. Pacey et al., “Development of a 6D Electron Beam Diagnostics Suite for Novel Acceleration Experiments at FEBE on CLARA”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 1-5. doi:10.18429/JACoW-IBIC2022-MO1C3
[n] W. H. Park et al., “A DC/DC Converter Test Board and Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP537, pp. XX-XX.
[n] F. Micolon et al., “FELICIA – A probe to survey the RHIC magnet beampipe diameter for EIC beam screen insertion”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4393-4395. doi:10.18429/JACoW-IPAC2023-THPA184
[n] C. Swain, A. Dixon, C. Welsch, and J. Wolfenden, “Synchrotron radiation simulations for the development of a coherent synchrotron radiation bunch length monitor”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3956-3958. doi:10.18429/JACoW-IPAC2023-THPA003
[n] N. Voumard, C. Boucly, M. P. Pimentel, P. Van Trappen, and L. Strobino, “Use of Multi-Network Fieldbus for Integration of Low-Level Intelligent Controller Within Control Architecture of Fast Pulsed System at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 590. doi:10.18429/JACoW-ICALEPCS2019-MOPHA152
[n] H. Schlarb et al., “First Operation of the FLASH Machine Protection System with Long Bunch Trains”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP009, pp. 262-264.
[n] L. Abadie et al., “MINT, an ITER Tool for Interactive Visualization of Data”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 809-813. doi:10.18429/JACoW-ICALEPCS2021-THAR01
For LaTeX
Use Complete Form
For BibTeX
References
- M. Quispe et al., “Assessment of the Corrosion of Copper Components in the Water Cooling System of ALBA Synchrotron Light Source; Presentation of a Proposal to Mitigate the Corrosion Rate of Copper”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 171.
- M. King et al., “Optical beam loss monitor installed at the SPS slow extraction region”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 86-90.
- A. Fedotov, D. Kayran, S. Seletskiy, J. Kewisch, Y. Jing, and G. Wang, “Accelerator physics requirements and challenges of RF based electron cooler for EIC injection energy”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 346-350.
- M. J. Lee, “GLAD: A Generic Lattice Debugger”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S17AIA03, pp. 566-569.
- Z. A. Conway et al., “Low-level RF control of microphonics in superconducting spoke-loaded cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP67, pp. XX-XX.
- L. Celona et al., “Status of the AISHa Ion Source at INFN-LNS”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOWZO03, pp. 10-12.
- A. Santamaria Garcia, A. Eichler, S. Hirlaender, J. Kaiser, and C. Xu, “Reinforcement learning in particle accelerators”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THYD1, pp. 2481-2486.
- M. Sangroula et al., “Design of a BPM pick-up for the EIC electron storage ring”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 163-167.
- L. Corner, L. J. Nevay, and R. Walczak, “A High Power Fibre Laser for Electron Beam Emittance Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD058, pp. 3227-3229.
- K. W. Shepard, “The RIA Driver Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH301, pp. 596-599.
- A. Augustinus, P. Ch. Chochula, L. S. Jirden, and L. W. Wallet, “Standard Device Control via PVSS Object Libraries in ALICE”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA22, pp. 135-137.
- H. Li et al., “The Integration and RF Conditioning of the ESS Double-Spoke Prototype Cryomodule at FREIA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2952-2955.
- A. Nicoletti and M. Martino, “Data-Driven Controller Design for High Precision Pulsed Power Converters for Bumper Magnets of the PS Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1928-1930.
- V. Chouhan et al., “Vertical Electropolishing of Nb Coupon Cavity and Surface Study of the Coupon Samples”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP098, pp. 1080-1083.
- J. O. Ortola Vidal and M. Vazquez Mu, “Integration of New Siemens S7-1500 PLC Family in UNICOS-CPC: Engineering Challenges and Performance Evaluation”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1363.
- V. P. Yakovlev et al., “Nonlinear Effects in Ferrite Tuned Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 877-880.
- Y. S. Cho, K. S. Kim, H. H. Lee, B. H. Choi, and J. M. Han, “LLRF SYSTEM FOR THE KTF RFQ LINAC”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP015, pp. XX-XX.
- T. von Witzleben et al., “Beam dynamics for concurrent operation of the LHeC and the HL-LHC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA054, pp. 151-154.
- W. Kaabi et al., “PERLE: a novel facility for ERL development and applications in multi-turn configuration and high-power regime”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGC3, unpublished.
- A. Blednykh et al., “EIC impedance and beam dynamics”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC45, pp. 3094-3097.
- D. Kayran, A. V. Fedotov, and S. Seletskiy, “Applying the Low Energy RHIC Electron Cooler (LEReC) Concept to the High Energy Coolers”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP26, unpublished.
- K. Deitrick, “Microbunching gain evaluation of bunch stretcher designs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA051, pp. 2774-2776.
- E. Simakov et al., “Status of the CARIE high gradient photocathode test facility at LANL”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC60, pp. 2101-2104.
- R. Nietubyc et al., “Magnetic lattice of PolFEL linac”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL137, unpublished.
- T. H. Pacey et al., “Development of a 6D Electron Beam Diagnostics Suite for Novel Acceleration Experiments at FEBE on CLARA”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 1-5.
- W. H. Park et al., “A DC/DC Converter Test Board and Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP537, pp. XX-XX.
- F. Micolon et al., “FELICIA – A probe to survey the RHIC magnet beampipe diameter for EIC beam screen insertion”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA184, pp. 4393-4395.
- C. Swain, A. Dixon, C. Welsch, and J. Wolfenden, “Synchrotron radiation simulations for the development of a coherent synchrotron radiation bunch length monitor”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA003, pp. 3956-3958.
- N. Voumard, C. Boucly, M. P. Pimentel, P. Van Trappen, and L. Strobino, “Use of Multi-Network Fieldbus for Integration of Low-Level Intelligent Controller Within Control Architecture of Fast Pulsed System at CERN”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 590.
- H. Schlarb et al., “First Operation of the FLASH Machine Protection System with Long Bunch Trains”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP009, pp. 262-264.
- L. Abadie et al., “MINT, an ITER Tool for Interactive Visualization of Data”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 809-813.
Back to search
