Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. J. Bakker et al., “FERMI@ELETTRA: the Single-Pass Free-Electron Laser for the VUV and Soft X-Ray Spectral Range at Elettra”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC011, pp. 214-216.
[n] D. E. Johnson, “Design of the Main Injector Extraction Beamlines”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA69, pp. 1243-1245.
[n] C. M. R. Greaves, J. Feng, H. A. Padmore, W. Wan, and D. Dowell, “Metal Cathodes with Reduced Emittance and Enhanced Quantum Efficiency”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB15, pp. 586-589.
[n] A. R. D. Rodrigues et al., “Sirius Status Update”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1381-1384. doi:10.18429/JACoW-IPAC2019-TUPGW003
[n] D. N. Olivieri, M. Church, and J. Morgan, “A Dynamic Momentum Compaction Factor Lattice in the FERMILAB DEBUNCHER Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR16, pp. 834-836.
[n] H. J. Qian et al., “Analysis and Optimization of Coupler Kick in APEX”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA09, pp. 607-609.
[n] I. Konkashbaev, P. F. Fisher, A. Hassanein, and N. V. Mokhov, “Enhancement of Heat Removal using Concave Liquid Metal Targets for High-Power Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN089, pp. 2915-2917.
[n] M. Castellano, A. Cianchi, V. Verzilov, L. Catani, and G. Orlandi, “Time Resolved Energy Measurement of the TESLA Test Facility Beam through the Analysis of Optical Transition Radiation Angular Distribution”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA144, pp. 2196-2198.
[n] B. Copy, H. Milcent, and M. Z. Zimny, “Standards-Based Open-Source PLC Diagnostics Monitoring”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1151-1154. doi:10.18429/JACoW-ICALEPCS2015-THHD3O05
[n] M. A. Uchida, C. Hunt, and J. Pasternak, “The Design and Implementation of The Radiation Monitors for the Protection of the MICE Tracker Detectors”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1559-1561. doi:10.18429/JACoW-IPAC2014-TUPRI004
[n] Y. Ogawa, “Commissioning Status of the KEKB Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP11, pp. 2984-2986.
[n] A. Afanasev, Y. S. Derbenev, R. P. Johnson, and V. S. Morozov, “Epicyclic Twin-helix Magnetic Structure for Parametric-resonance Ionization Cooling”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA042, pp. 166-168.
[n] A. Brynes et al., “Progress in the development of the community Particle Accelerator Language Standard (PALS)”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6394, unpublished.
[n] K. Howard, M. Liepe, and Z. Sun, “Thermal Annealing of Sputtered Nb3Sn and V3Si Thin Films for Superconducting RF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 82. doi:10.18429/JACoW-SRF2021-SUPFDV009
[n] J. Schubert and H. Blosser, “Conceptual Design of a High Field Ultra-Compact Cyclotron for Nuclear Physics Research”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W028, pp. 1060-1062.
[n] A. Szwangruber et al., “SIS100 Dipoles From Design to Testing of Series Magnets”, in Proc. IPAC'20, Caen, France, May 2020, paper THVIR05, pp. XX-XX.
[n] M. Dohlus, A. Kabel, and T. Limberg, “Uncorrelated Emittance Growth in the TTF-FEL Bunch Compression Sections Due to Coherent Synchrotron Radiation and Space Charge Effects”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP34G, pp. 1192-1194.
[n] A. A. Asseev and M. Yu. Gorin, “Non-resonant Slow Extraction of Protons to the Tagged Neutrino Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP053G, pp. 2409-2411.
[n] H. Katagiri, K. Furukawa, H. Hanaki, and S. Anami, “Microwave Monitor System for the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D025, pp. 142-144.
[n] C. Hunt, V. C. Palladino, and C. G. Whyte, “Progress on Muon Ionization Cooling Demonstration with MICE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 594-597. doi:10.18429/JACoW-IPAC2019-MOPRB011
[n] G. Aparicio Cantalapiedra, J. Oliveira, J.-P. Corso, P. Fessia, S. Maridor, and M. Modena, “The high luminosity Large Hadron Collider project: from project to reality at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3855-3858. doi:10.18429/JACoW-IPAC2023-WEPM124
[n] S. H. Kim et al., “Preservation of Quality Factor of Half Wave Resonator during Quenching in the Presence of Solenoid Field”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3270-3272. doi:10.18429/JACoW-IPAC2015-WEPTY009
[n] J. Jones, A. Brynes, M. Johnson, M. King, and N. Ziyan, “Moonlight on the Serengeti: Casting (Digital) Shadows with SIMBA, PUMBA, LAURA and Friends”, presented at the IPAC'26, Deauville, France, May 2026, paper WEV6003, unpublished.
[n] P. Hurh, J. Morgan, and R. Schultz, “The Design of a Diffusion Bonded High Gradient Collection Lens for the FNAL Antiproton Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG010, pp. 1443-1445.
[n] Z. A. Conway and M. Liepe, “Electromagnetic and Mechanical Properties of the Cornell ERL Injector Cryomodule”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP042, pp. 915-917.
[n] A. Brynes, “Characterisation of microbunching instability at the FERMI Free Electron Laser”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 47-52. doi:10.18429/JACoW-IPAC2023-MOOG2
[n] A. Zografos et al., “Development of the Dielectric Wall Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOAB201, pp. 3115-3117.
[n] R. Hessami, A. Marinelli, C. Emma, J. Morgan, K. Larsen, and R. Robles, “Commissioning of spectral diagnostics and future concepts for the PAX experiment at FACET-II”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG52, unpublished.
[n] G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
[n] Y. Ohashi et al., “Performance of the Reference and Timing Systems at SPring-8”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper FRAT005, pp. XX-XX.
[n] I. Marneris, S. V. Badea, R. Bonati, T. Roser, and J. Sandberg, “Simulations of the AGS MMPS Storing Energy in Capacitor Banks”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS096, pp. 652-654.
[n] T. Brown et al., “Automation upgrade of the CXLS photoinjector”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3275-3277. doi:10.18429/JACoW-IPAC2024-THPG14
[n] L. Groening, H. H. Braun, S. Döbert, M. Borland, and A. Kabel, “Recent Experiments on the Effect of Coherent Synchrotron Radiation on the Electron Beam of CTF II”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAA009, pp. 164-166.
[n] H. G. Blosser, D. A. Johnson, and J. Schubert, “Invited Paper: Problems and Accomplishments of Superconducting Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper N-01, pp. 674-684.
[n] F. M. Velotti et al., “Characterisation of SPS Slow Extraction Spill Quality Degradation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2403-2405. doi:10.18429/JACoW-IPAC2019-WEPMP034
[n] V. Forte, W. Bartmann, C. C. M. Borburgh, M. A. Fraser, and L. Sermeus, “Beam-Based Kicker Waveform Measurements Using Long Bunches”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 599-602. doi:10.18429/JACoW-IPAC2017-MOPIK042
[n] G. R. Rovigatti de Oliveira, H. Geraissate, and R. Junqueira Leao, “Alignment Strategies and First Results on Sirius Beamlines”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 349. doi:10.18429/JACoW-MEDSI2020-THOA03
[n] F. Bill?¿ et al., “Data Lifecycle in Large Experimental Physics Facilities: The Approach of the Synchrotron ELETTRA and the Free Electron Laser FERMI”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 777-781. doi:10.18429/JACoW-ICALEPCS2015-WEPGF037
[n] B. Goddard, B. Balhan, C. C. M. Borburgh, M. A. Fraser, L. S. Stoel, and F. M. Velotti, “The Use of a Passive Scatterer for SPS Slow Extraction Beam Loss Reduction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 607-610. doi:10.18429/JACoW-IPAC2017-MOPIK044
[n] A. Drago et al., “Multi-Bunch Longitudinal Dynamics and Diagnostics via a Digital Feedback System at PEP-II, DAFNE, ALS and SPEAR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEOB01A, pp. 296-298.
[n] M. A. Leonova et al., “MICE Cavity Installation and Commissioning/Operation at MTA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3342-3344. doi:10.18429/JACoW-IPAC2015-WEPTY032
[n] G. D'Auria et al., “Linac Upgrades for FERMI@ELETTRA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP44, pp. 366-368.
[n] F. M. Velotti et al., “Feasibility Studies for the Extraction of both LHC Beams from CERN SPS using a Common Kicker”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 842-844. doi:10.18429/JACoW-IPAC2014-MOPRI097
[n] J. R. Piton et al., “Control and Diagnostic Systems for the LNLS 500-MeV Booster Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH025, pp. 822-824.
[n] B. Goddard et al., “Progress with the Upgrade of the SPS for the HL-LHC Era”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA053, pp. 2624-2626.
[n] G. Ferrini et al., “Cs2Te Photocathode for the TTF Injector II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP068L, pp. 1510-1512.
[n] T. Sakurai, T. Inagaki, Y. Otake, and H. Ego, “Design of a C-band Disk-loaded Type Accelerating Structure for a Higher Pulse Repetition Rate in the SACLA Accelerator.”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB084, pp. 372-374.
[n] P. Aeschimann, L. Besse, and I. Jirousek, “Therapy Controller Designed for Patient Irradiation at the SIN --Applicator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-15, pp. 2277-2280.
[n] P. F. Tavares, F. Arroyo, R. H. A. Farias, L. C. Jahnel, C. Pardine, and C. Rodrigues, “Injector Improvements at the Brazilian Synchrotron Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN005, pp. 152-154.
[n] A. A. Asseev, Yu. S. Fedotov, E. A. Ludmirsky, V. A. Maischeev, S. B. Nuruschev, and A. N. Vasil, “Peculiarities of Using the Bent Crystal for the Extraction of Protons from IHEP Accelerator to the PROZA Facility”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1504-1507.
[n] C. Hunt, J.-B. Lagrange, and J. Pasternak, “Layout of the MICE Demonstration of Muon Ionization Cooling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2881-2884. doi:10.18429/JACoW-IPAC2017-WEPAB131
[n] R. Hessami, A. Marinelli, C. Emma, J. Morgan, K. Larsen, and R. Robles, “Multi-color operation via coherent harmonic generation in a plasma driven attosecond X-ray source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1896-1898. doi:10.18429/JACoW-IPAC2023-TUPL062
[n] V. K. Bharadwaj, K. Bane, J. Clendenin, P. Emma, J. C. Sheppard, and M. D. Woodley, “Linac Design for the LCLS Project at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V040, pp. 903-905.
For LaTeX
Use Complete Form
For BibTeX
References
- R. J. Bakker et al., “FERMI@ELETTRA: the Single-Pass Free-Electron Laser for the VUV and Soft X-Ray Spectral Range at Elettra”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC011, pp. 214-216.
- D. E. Johnson, “Design of the Main Injector Extraction Beamlines”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA69, pp. 1243-1245.
- C. M. R. Greaves, J. Feng, H. A. Padmore, W. Wan, and D. Dowell, “Metal Cathodes with Reduced Emittance and Enhanced Quantum Efficiency”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB15, pp. 586-589.
- A. R. D. Rodrigues et al., “Sirius Status Update”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1381-1384.
- D. N. Olivieri, M. Church, and J. Morgan, “A Dynamic Momentum Compaction Factor Lattice in the FERMILAB DEBUNCHER Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR16, pp. 834-836.
- H. J. Qian et al., “Analysis and Optimization of Coupler Kick in APEX”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA09, pp. 607-609.
- I. Konkashbaev, P. F. Fisher, A. Hassanein, and N. V. Mokhov, “Enhancement of Heat Removal using Concave Liquid Metal Targets for High-Power Accelerators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN089, pp. 2915-2917.
- M. Castellano, A. Cianchi, V. Verzilov, L. Catani, and G. Orlandi, “Time Resolved Energy Measurement of the TESLA Test Facility Beam through the Analysis of Optical Transition Radiation Angular Distribution”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA144, pp. 2196-2198.
- B. Copy, H. Milcent, and M. Z. Zimny, “Standards-Based Open-Source PLC Diagnostics Monitoring”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1151-1154.
- M. A. Uchida, C. Hunt, and J. Pasternak, “The Design and Implementation of The Radiation Monitors for the Protection of the MICE Tracker Detectors”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1559-1561.
- Y. Ogawa, “Commissioning Status of the KEKB Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP11, pp. 2984-2986.
- A. Afanasev, Y. S. Derbenev, R. P. Johnson, and V. S. Morozov, “Epicyclic Twin-helix Magnetic Structure for Parametric-resonance Ionization Cooling”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA042, pp. 166-168.
- A. Brynes et al., “Progress in the development of the community Particle Accelerator Language Standard (PALS)”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6394, this conference.
- K. Howard, M. Liepe, and Z. Sun, “Thermal Annealing of Sputtered Nb3Sn and V3Si Thin Films for Superconducting RF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 82.
- J. Schubert and H. Blosser, “Conceptual Design of a High Field Ultra-Compact Cyclotron for Nuclear Physics Research”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W028, pp. 1060-1062.
- A. Szwangruber et al., “SIS100 Dipoles From Design to Testing of Series Magnets”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper THVIR05, pp. XX-XX.
- M. Dohlus, A. Kabel, and T. Limberg, “Uncorrelated Emittance Growth in the TTF-FEL Bunch Compression Sections Due to Coherent Synchrotron Radiation and Space Charge Effects”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP34G, pp. 1192-1194.
- A. A. Asseev and M. Yu. Gorin, “Non-resonant Slow Extraction of Protons to the Tagged Neutrino Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP053G, pp. 2409-2411.
- H. Katagiri, K. Furukawa, H. Hanaki, and S. Anami, “Microwave Monitor System for the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D025, pp. 142-144.
- C. Hunt, V. C. Palladino, and C. G. Whyte, “Progress on Muon Ionization Cooling Demonstration with MICE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 594-597.
- G. Aparicio Cantalapiedra, J. Oliveira, J.-P. Corso, P. Fessia, S. Maridor, and M. Modena, “The high luminosity Large Hadron Collider project: from project to reality at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM124, pp. 3855-3858.
- S. H. Kim et al., “Preservation of Quality Factor of Half Wave Resonator during Quenching in the Presence of Solenoid Field”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3270-3272.
- J. Jones, A. Brynes, M. Johnson, M. King, and N. Ziyan, “Moonlight on the Serengeti: Casting (Digital) Shadows with SIMBA, PUMBA, LAURA and Friends”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEV6003, this conference.
- P. Hurh, J. Morgan, and R. Schultz, “The Design of a Diffusion Bonded High Gradient Collection Lens for the FNAL Antiproton Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG010, pp. 1443-1445.
- Z. A. Conway and M. Liepe, “Electromagnetic and Mechanical Properties of the Cornell ERL Injector Cryomodule”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP042, pp. 915-917.
- A. Brynes, “Characterisation of microbunching instability at the FERMI Free Electron Laser”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOOG2, pp. 47-52.
- A. Zografos et al., “Development of the Dielectric Wall Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THOAB201, pp. 3115-3117.
- R. Hessami, A. Marinelli, C. Emma, J. Morgan, K. Larsen, and R. Robles, “Commissioning of spectral diagnostics and future concepts for the PAX experiment at FACET-II”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG52, unpublished.
- G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
- Y. Ohashi et al., “Performance of the Reference and Timing Systems at SPring-8”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper FRAT005, pp. XX-XX.
- I. Marneris, S. V. Badea, R. Bonati, T. Roser, and J. Sandberg, “Simulations of the AGS MMPS Storing Energy in Capacitor Banks”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS096, pp. 652-654.
- T. Brown et al., “Automation upgrade of the CXLS photoinjector”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG14, pp. 3275-3277.
- L. Groening, H. H. Braun, S. Döbert, M. Borland, and A. Kabel, “Recent Experiments on the Effect of Coherent Synchrotron Radiation on the Electron Beam of CTF II”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAA009, pp. 164-166.
- H. G. Blosser, D. A. Johnson, and J. Schubert, “Invited Paper: Problems and Accomplishments of Superconducting Cyclotrons”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper N-01, pp. 674-684.
- F. M. Velotti et al., “Characterisation of SPS Slow Extraction Spill Quality Degradation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2403-2405.
- V. Forte, W. Bartmann, C. C. M. Borburgh, M. A. Fraser, and L. Sermeus, “Beam-Based Kicker Waveform Measurements Using Long Bunches”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 599-602.
- G. R. Rovigatti de Oliveira, H. Geraissate, and R. Junqueira Leao, “Alignment Strategies and First Results on Sirius Beamlines”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 349.
- F. Bill?¿ et al., “Data Lifecycle in Large Experimental Physics Facilities: The Approach of the Synchrotron ELETTRA and the Free Electron Laser FERMI”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 777-781.
- B. Goddard, B. Balhan, C. C. M. Borburgh, M. A. Fraser, L. S. Stoel, and F. M. Velotti, “The Use of a Passive Scatterer for SPS Slow Extraction Beam Loss Reduction”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 607-610.
- A. Drago et al., “Multi-Bunch Longitudinal Dynamics and Diagnostics via a Digital Feedback System at PEP-II, DAFNE, ALS and SPEAR”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEOB01A, pp. 296-298.
- M. A. Leonova et al., “MICE Cavity Installation and Commissioning/Operation at MTA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3342-3344.
- G. D'Auria et al., “Linac Upgrades for FERMI@ELETTRA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP44, pp. 366-368.
- F. M. Velotti et al., “Feasibility Studies for the Extraction of both LHC Beams from CERN SPS using a Common Kicker”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 842-844.
- J. R. Piton et al., “Control and Diagnostic Systems for the LNLS 500-MeV Booster Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH025, pp. 822-824.
- B. Goddard et al., “Progress with the Upgrade of the SPS for the HL-LHC Era”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA053, pp. 2624-2626.
- G. Ferrini et al., “Cs2Te Photocathode for the TTF Injector II”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP068L, pp. 1510-1512.
- T. Sakurai, T. Inagaki, Y. Otake, and H. Ego, “Design of a C-band Disk-loaded Type Accelerating Structure for a Higher Pulse Repetition Rate in the SACLA Accelerator.”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB084, pp. 372-374.
- P. Aeschimann, L. Besse, and I. Jirousek, “Therapy Controller Designed for Patient Irradiation at the SIN --Applicator”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper E-15, pp. 2277-2280.
- P. F. Tavares, F. Arroyo, R. H. A. Farias, L. C. Jahnel, C. Pardine, and C. Rodrigues, “Injector Improvements at the Brazilian Synchrotron Light Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN005, pp. 152-154.
- A. A. Asseev, Yu. S. Fedotov, E. A. Ludmirsky, V. A. Maischeev, S. B. Nuruschev, and A. N. Vasil, “Peculiarities of Using the Bent Crystal for the Extraction of Protons from IHEP Accelerator to the PROZA Facility”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1504-1507.
- C. Hunt, J.-B. Lagrange, and J. Pasternak, “Layout of the MICE Demonstration of Muon Ionization Cooling”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2881-2884.
- R. Hessami, A. Marinelli, C. Emma, J. Morgan, K. Larsen, and R. Robles, “Multi-color operation via coherent harmonic generation in a plasma driven attosecond X-ray source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL062, pp. 1896-1898.
- V. K. Bharadwaj, K. Bane, J. Clendenin, P. Emma, J. C. Sheppard, and M. D. Woodley, “Linac Design for the LCLS Project at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V040, pp. 903-905.
Back to search