Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. O'Shea, A. Edelen, J. Edelen, J. Diaz Cruz, and M. Henderson, “Automation of RF tuning for medical accelerators”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB100, unpublished.
[n] D. M. Gassner et al., “Instrumentation for the Proposed Low Energy RHIC Electron Cooling Project with Energy Recovery”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF05, pp. 49-54.
[n] O. I. Meshkov et al., “The New Optical Device for Turn-to-turn Beam Profile Measurement”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3617-3619. doi:10.18429/JACoW-IPAC2014-THPME153
[n] Y. Lee, S. W. Jang, E.-S. Kim, B. H. Choi, D. S. Kim, and Z. Li, “Design Study of Drift Tube Linac for BNCT Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 359-361. doi:10.18429/JACoW-IPAC2017-MOPAB099
[n] X. Y. Chang et al., “Measurement of the Secondary Emission Yield of a Thin Diamond Window in Transmission Mode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE032, pp. 2251-2253.
[n] D. M. Bacescu, L. Berman, S. Hulbert, B. Ocko, and Z. Yin, “A New Experimental Station for Liquid Interface X-Ray Scattering At NSLS-II Beamline 12-ID”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 330. doi:10.18429/JACoW-MEDSI2020-WEPC12
[n] G. Toby et al., “Multipacting analysis of the SNS drift tube linac (DTL) RF vacuum window using Spark3d”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2962-2965. doi:10.18429/JACoW-IPAC2023-WEPA127
[n] F. Herfurth et al., “Heavy, Highly-charged Ions at GSI/FAIR Decelerated and Cooled”, presented at the COOL2023, Montreux, Switzerland, Oct. 2023, paper WEPAM2R2, unpublished.
[n] T. Inagaki et al., “Low Emittance 500 kV Thermionic Electron Gun”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TU202, pp. 261-265.
[n] M. T. F. Pivi et al., “ESTB: A New Beam Test Facility at SLAC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ017, pp. 2808-2810.
[n] Akers W., Chen J., Watson C., “CDEV-NT: Porting the Control Device Interface to Windows NT”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P37, pp. XX-XX.
[n] R. Appleby et al., “Machine Induced Backgrounds for FP420”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP006, pp. 559-561.
[n] R. Kwee-Hinzmann et al., “First Beam Background Simulation Studies at IR1 for High Luminosity LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1074-1077. doi:10.18429/JACoW-IPAC2014-TUPRO027
[n] E. Paoloni et al., “Advances in the Design of the SuperB Final Doublet”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO026, pp. 2454-2456.
[n] L. W. Feng et al., “Control System for DC-SRF Photo-Injector at Peking University”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 962-964. doi:10.18429/JACoW-IPAC2015-MOPTY013
[n] E. Ferrari et al., “Status of the seeding upgrade for FLASH2020+ project”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL013, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- F. O'Shea, A. Edelen, J. Edelen, J. Diaz Cruz, and M. Henderson, “Automation of RF tuning for medical accelerators”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB100, unpublished.
- D. M. Gassner et al., “Instrumentation for the Proposed Low Energy RHIC Electron Cooling Project with Energy Recovery”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF05, pp. 49-54.
- O. I. Meshkov et al., “The New Optical Device for Turn-to-turn Beam Profile Measurement”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3617-3619.
- Y. Lee, S. W. Jang, E.-S. Kim, B. H. Choi, D. S. Kim, and Z. Li, “Design Study of Drift Tube Linac for BNCT Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 359-361.
- X. Y. Chang et al., “Measurement of the Secondary Emission Yield of a Thin Diamond Window in Transmission Mode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE032, pp. 2251-2253.
- D. M. Bacescu, L. Berman, S. Hulbert, B. Ocko, and Z. Yin, “A New Experimental Station for Liquid Interface X-Ray Scattering At NSLS-II Beamline 12-ID”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 330.
- G. Toby et al., “Multipacting analysis of the SNS drift tube linac (DTL) RF vacuum window using Spark3d”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA127, pp. 2962-2965.
- F. Herfurth et al., “Heavy, Highly-charged Ions at GSI/FAIR Decelerated and Cooled”, presented at the 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper WEPAM2R2, unpublished.
- T. Inagaki et al., “Low Emittance 500 kV Thermionic Electron Gun”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TU202, pp. 261-265.
- M. T. F. Pivi et al., “ESTB: A New Beam Test Facility at SLAC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ017, pp. 2808-2810.
- Akers W., Chen J., Watson C., “CDEV-NT: Porting the Control Device Interface to Windows NT”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P37, pp. XX-XX.
- R. Appleby et al., “Machine Induced Backgrounds for FP420”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP006, pp. 559-561.
- R. Kwee-Hinzmann et al., “First Beam Background Simulation Studies at IR1 for High Luminosity LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1074-1077.
- E. Paoloni et al., “Advances in the Design of the SuperB Final Doublet”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO026, pp. 2454-2456.
- L. W. Feng et al., “Control System for DC-SRF Photo-Injector at Peking University”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 962-964.
- E. Ferrari et al., “Status of the seeding upgrade for FLASH2020+ project”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL013, unpublished.
Back to search