Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. Sun et al., “Electroplating of Sn Film on Nb Substrate for Generating Nb?Sn Thin Films and Post Laser Annealing”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 51-54. doi:10.18429/JACoW-SRF2019-MOP014
[n] J. Y. Yang, “DC high voltage electron gun development of the Dalian Advanced Light source pre-research project”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUIBA01, unpublished.
[n] K. Vodopivec, J. E. Breeding, and J. W. Sinclair, “The Linux Device Driver Framework for High-Throughput Lossless Data Streaming Applications”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 603. doi:10.18429/JACoW-ICALEPCS2019-MOPHA156
[n] R. Defavari et al., “Mechanical Design, Fabrication and Characterization of Electron Beam Position Monitors for Sirius”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2461-2464. doi:10.18429/JACoW-IPAC2021-TUPAB401
[n] G. Pile, T. Zinneman, and J. A. Carwardine, “Management of High Current Transients in the CWDD Injector 200kV Power System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3210-3213.
[n] S. V. Melanson, M. P. Dehnel, C. Hollinger, J. A. Martin, D. E. Potkins, and C. Philpott, “A PID Control Algorithm for Filament-Powered Volume-Cusp Ion Sources”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2623-2624. doi:10.18429/JACoW-IPAC2016-WEPMY032
[n] K. Yoshimura, M. Aoki, Y. Hashimoto, and Y. Igarashi, “Measurements of Proton Beam Extinction of J-PARC MR Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP050, pp. 3564-3566.
[n] G. Blokesch, J. Friedl, A. Jankowiak, C. Piel, T. Weis, and K. Wille, “The Injector Linac of the DELTA-Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP135G, pp. 834-838.
[n] F. Long, Y. P. Liu, X. Qi, and Z. H. ZhenHua, “Conceptual Design for the HEPS Power Supply System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3540-3542. doi:10.18429/JACoW-IPAC2016-THPMW004
[n] K. Yonehara et al., “Progress of Gas-Filled Multi-RF-Cavity Beam Profile Monitor for Intense Neutrino Beams”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1275-1278. doi:10.18429/JACoW-NAPAC2016-FRA1CO05
[n] G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
[n] P. Van Trappen et al., “SPS Beam Dump System (SBDS) Commissioning After Relocation and Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2530-2532. doi:10.18429/JACoW-IPAC2022-THPOST039
[n] Y. Kamiya et al., “Development of Shintake Beam Size Monitor for ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE022, pp. 1011-1013.
[n] G. Janser, G. Dzieglewski, W. Hugentobler, and F. Kreis, “Control System Hardware Upgrade”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC034, pp. 151-153.
[n] F. Schlie?ƒmann, M. Arnold, M. Dutine, and N. Pietralla, “Determination of the Momentum Spread While Running in the ERL Mode at the S-DALINAC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 300-303. doi:10.18429/JACoW-IBIC2019-TUPP009
[n] S. Esin, L. Kravchuk, V. Paramonov, and G. Romanov, “The Disk and Washer Structure for Moscow Meson Factory Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-53, pp. 657-659.
[n] N. V. Avreline, “The Design of 1 MeV Proton LINAC Operating in CW”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3905-3907. doi:10.18429/JACoW-IPAC2018-THPAL113
[n] A. Yeremian, J. Adamski, W. Gallagher, R. Kennedy, J. Orthel, and L. Young, “Boeing 120 MeV RF Linac Injector Design and Accelerator Performance Comparison with PARMELA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 657-660.
[n] L. Liu, J. Qiu, J. Tang, and T. Wei, “Simulations of Longitudinal Phase Space Painting for the CSNS RCS Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP054, pp. 1403-1405.
[n] A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 358-360. doi:10.18429/JACoW-NAPAC2016-TUPOA36
[n] C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105.
[n] T. Lefevre, H.-H. Braun, E. Bravin, C. Dutriat, and C. P. Welsch, “Segmented Beam Dump for Time Resolved Spectrometry on a High Current Electron Beam”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC14, pp. 340-342.
[n] P. B. Larsen et al., “Intense Sheet Electron Beam Transport in a Periodically Cusped Magnetic Field”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP035, pp. 1558-1560.
[n] K. Shinto et al., “A Negative Ion Beam Probe for Diagnostics of a High Intensity Ion Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE018, pp. 999-1001.
[n] S. A. Glukhov and E. B. Levichev, “Realistic Approach for Beam Dynamics Simulation with Synchrotron Radiation in High Energy Circular Lepton Colliders”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 147-150. doi:10.18429/JACoW-ICAP2015-THCBC2
[n] K. Gross and J. Adamy, “Comparison of LLRF Control Approaches for High Intensity Hadron Synchrotrons: Design and Performance”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC076, pp. 3464-3466.
[n] M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
[n] B. Singh, R. Bartolini, R. T. Fielder, I. P. S. Martin, and J. Rowland, “Beam Dynamics Effect of Insertion Devices at Diamond Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE088, pp. 4731-4733.
[n] J. Norem, P. Bauer, J. Sebastian, and D. N. Seidman, “Atom Probe Tomography Studies of RF Materials”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAC008, pp. 612-614.
[n] J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2320-2323.
[n] P. Duval, J. Bobnar, I. Kriznar, T. Kusterle, M. Lomperski, and S. Weisse, “New ACOP Beans and TINE General Purpose Diagnostic Applications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP034, pp. 161-163.
[n] T. B. Petersen, J. S. Diamond, N. Liu, P. S. Prieto, D. Slimmer, and A. C. Watts, “Fermilab Switchyard Resonant Beam Position Monitor Electronics Upgrade Results”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 352-354. doi:10.18429/JACoW-NAPAC2016-TUPOA30
[n] M. Jablonka, B. Aune, and Ch. Magne, “A Scheme for a Fully Superconducting Electron Injector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 478-481.
[n] M. N. H. Comsan, “Tandem Accelerator Facility at Inshas”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05C, pp. 2442-2444.
[n] M. M. Paoluzzi et al., “The New 1-18 MHz Wideband RF System for the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3063-3065. doi:10.18429/JACoW-IPAC2019-WEPRB107
[n] C. Adolphsen et al., “LIAR - A Computer Program for the Simulation and Modeling of High Performance Linacs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP27C, pp. 1156-1158.
[n] P. Strolin and E. J. N. Wilson, “The Effect of Momentum Spread in Slow Extraction at an Integer Resonance - A Theoretical Study”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 255-260.
[n] E. Bravin et al., “Collision Rate Monitors for LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN067, pp. 4171-4173.
[n] G. Hemmie, “DESY II, a New Injector for the DESY Storage Rings PETRA and DORIS II”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2028-2031.
[n] G. L. Orlandi et al., “FERMI-PSI Collaboration on Nano-Fabricated Wire-Scanners With Sub-Micrometer Resolution: Developments and Measurements.”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 249-252. doi:10.18429/JACoW-IBIC2019-TUBO02
[n] G. Schuenemann, P. Hartmann, D. Schirmer, G. Schmidt, P. Towalski, and T. Weis, “FPGA Based Fast Orbit Feedback Data Acquisition System for Electron and Hadron Storage Rings”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC16, pp. 82-84.
[n] K. Inoue, M. Hara, Y. Kawashima, and T. Nakamura, “Current Status of RF System for the SPring-8”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 667-670.
[n] F. Hern?índez et al., “Investigation of Thermal Instabilities in the ALBA Cooling System, Based on Numerical Simulations and Experimental Measurements”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 153. doi:10.18429/JACoW-MEDSI2020-TUPB05
[n] V. Da Silva et al., “DAQ System Based on Sardana and PandABox for Combined SAXS, Fluorescence and UV-Vis Spectroscopy Techniques at MAX IV CoSAXS Beamline”, presented at the ICALEPCS'23, Cape Town, South Africa, Oct. 2023, paper THMBCMO09, unpublished.
[n] T. Abe et al., “Application of Highly-Pure Copper Lining to Normal-Conducting RF Cavities for an Electron-Positron Super B Factory”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT007, pp. 1051-1053.
[n] L. Ferrucci, C. Pagani, and L. Serafini, “Short RF Pulse Propagation in a Traveling Wave Structure”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-45, pp. 640-642.
[n] M. S. Beck et al., “Studies of Transverse Instabilities in the CERN SPS”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 291-295. doi:10.18429/JACoW-HB2018-WEP2PO011
[n] G. Jackson, “Bunched Beam Stochastic Cooling”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2532-2537.
[n] T.-Y. Lee, J. Lee, S. Shin, C. U. Choi, and M. Chung, “Cyclotrons for Accelerator-Driven Systems”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 305-307. doi:10.18429/JACoW-NAPAC2016-TUPOA10
[n] Y. S. Chung, “Status of RAON Superconducting Linac at IBS”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper MOIAA02, unpublished.
[n] C. U. Choi, M. Chung, G. Hahn, J. Lee, T.-Y. Lee, and S. Shin, “Simulation Code Development for High-Power Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 68-70. doi:10.18429/JACoW-Cyclotrons2016-MOP09
[n] P. Hartmann, D. Schirmer, G. Schuenemann, P. Towalski, and T. Weis, “Fast Orbit Feedbacks for DELTA”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP066, pp. 791-793.
[n] P. J. Tallerico, “Low Frequency Klystrons for Accelerator Applications”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1692-1695.
[n] G. O. Bolme et al., “Analysis of High-Power Conditioning for Accelerator Cavities Using a Six-Port Reflectometer”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-34, pp. 136-138.
[n] R. A. Bosch, K. J. Kleman, and R. A. Legg, “Simulated Performance of the Wisconsin Superconducting Electron Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD075, pp. 1572-1574.
[n] N. Chelidze, R. Ainsworth, and K. J. Hazelwood, “The Effect of the Main Injector Ramp on the Recycler”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 90-92. doi:10.18429/JACoW-NAPAC2022-MOPA19
[n] A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and G. C. Stutzin, “Laser Diagnostics of H- formation in a Magnetic Multicusp Ion Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1916-1919.
[n] G. D. Kim et al., “Facility for MeV Degree Neutron Capture Cross Section at KIGAM”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19009, pp. XX-XX.
[n] C.-S. Huang, B.-Y. Chen, C.-K. Kuan, W.-Y. Lai, T.-C. Tseng, and H.-S. Wang, “Anodic bonding of silicon and glass for bent monochromator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4953-4956. doi:10.18429/JACoW-IPAC2023-THPM028
[n] N. V. Avreline, Y. Bylinskii, B. Jakovljevic, Y. Ma, and V. Zvyagintsev, “The Design of 1.1 MW RF Dummy Load for the RF System of 520 MeV Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3911-3913. doi:10.18429/JACoW-IPAC2018-THPAL115
[n] S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz Pulsed Klystron for the Spallation Neutron Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE119, pp. 2323-2325.
[n] J. Heller, T. Flisgen, C. Schmidt, and U. van Rienen, “Quantification of Geometric Uncertainties in Single Cell Cavities for BESSY VSR using Polynomial Chaos”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 415-417. doi:10.18429/JACoW-IPAC2014-MOPME018
[n] J. D. Sherman, P. Allison, and H. V. Smith, “Beam Potential Measurement of an Intense H- Beam by Use of the Emissive Probe Technique”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1973-1976.
[n] X. Sun and G. Decker, “Low-Frequency Time Domain Numerical Studies of Transition Radiation in a Cylindrical Waveguide”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP078, pp. 3383-3385.
[n] I. Kourbanis et al., “Current and Future High Power Operation of Fermilab Main Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP060, pp. 1421-1423.
[n] H. Takeda, “Transient Analysis of a Coupled Accelerator and Decelerator System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1161-1164.
[n] P. Golonka, M. Gonzalez-Berges, J. Hofer, and A. Voitier, “Database Archiving System for Supervision Systems at CERN: a Successful Upgrade Story”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 129-132. doi:10.18429/JACoW-ICALEPCS2015-MOPGF021
[n] K. N. Leung, W. F. DiVergilio, C. A. Hauck, W. B. Kunkel, and D. S. McDonald, “Optimization of an RF Driven H- ion Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1919-1922.
[n] S. Chunjarean and S. Shin, “Insertion Devices and Beam Dynamics in the PLS-II Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC072, pp. 2187-2189.
[n] H. Okamoto, K. Ito, and H. Higaki, “Non-neutral Plasma Traps for Accelerator-free Experiments on Space-charge-dominated Beam Dynamics”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS1, pp. 46-50.
[n] L. E. Sakazaki, R. M. Littauer, R. H. Siemann, and R. M. Talman, “Anomalous"”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. -Nonlinearly-Current-Dependent-Damping-in-CESR".
[n] V. Derenchuk, R. Brown, H. Petri, E. Stephenson, and M. Wedekind, “Emittance Measurements of the High Intensity Polarized Ion Source at IUCF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC08, pp. 1010-1012.
[n] W. Chupp, D. Clark, R. Richter, J. Staples, and E. Zajec, “Operation of a High-Current Xenon Source”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3036-3039.
[n] S. G. Arnold et al., “Optimizing Growth of Niobium-3 Tin Through Pre-nucleation Chemical Treatments”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 337-341. doi:10.18429/JACoW-SRF2023-MOPMB093
[n] M. Inoue, V. Kapin, and A. Noda, “Design Study of a Multiple-Beam RFQ Version of a High-Current Linac Injector for a Neutron Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP18C, pp. 725-727.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Sun et al., “Electroplating of Sn Film on Nb Substrate for Generating Nb?Sn Thin Films and Post Laser Annealing”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 51-54.
- J. Y. Yang, “DC high voltage electron gun development of the Dalian Advanced Light source pre-research project”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper TUIBA01, unpublished.
- K. Vodopivec, J. E. Breeding, and J. W. Sinclair, “The Linux Device Driver Framework for High-Throughput Lossless Data Streaming Applications”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 603.
- R. Defavari et al., “Mechanical Design, Fabrication and Characterization of Electron Beam Position Monitors for Sirius”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2461-2464.
- G. Pile, T. Zinneman, and J. A. Carwardine, “Management of High Current Transients in the CWDD Injector 200kV Power System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3210-3213.
- S. V. Melanson, M. P. Dehnel, C. Hollinger, J. A. Martin, D. E. Potkins, and C. Philpott, “A PID Control Algorithm for Filament-Powered Volume-Cusp Ion Sources”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2623-2624.
- K. Yoshimura, M. Aoki, Y. Hashimoto, and Y. Igarashi, “Measurements of Proton Beam Extinction of J-PARC MR Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP050, pp. 3564-3566.
- G. Blokesch, J. Friedl, A. Jankowiak, C. Piel, T. Weis, and K. Wille, “The Injector Linac of the DELTA-Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP135G, pp. 834-838.
- F. Long, Y. P. Liu, X. Qi, and Z. H. ZhenHua, “Conceptual Design for the HEPS Power Supply System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3540-3542.
- K. Yonehara et al., “Progress of Gas-Filled Multi-RF-Cavity Beam Profile Monitor for Intense Neutrino Beams”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1275-1278.
- G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
- P. Van Trappen et al., “SPS Beam Dump System (SBDS) Commissioning After Relocation and Upgrade”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2530-2532.
- Y. Kamiya et al., “Development of Shintake Beam Size Monitor for ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE022, pp. 1011-1013.
- G. Janser, G. Dzieglewski, W. Hugentobler, and F. Kreis, “Control System Hardware Upgrade”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC034, pp. 151-153.
- F. Schlie?ƒmann, M. Arnold, M. Dutine, and N. Pietralla, “Determination of the Momentum Spread While Running in the ERL Mode at the S-DALINAC”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 300-303.
- S. Esin, L. Kravchuk, V. Paramonov, and G. Romanov, “The Disk and Washer Structure for Moscow Meson Factory Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-53, pp. 657-659.
- N. V. Avreline, “The Design of 1 MeV Proton LINAC Operating in CW”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3905-3907.
- A. Yeremian, J. Adamski, W. Gallagher, R. Kennedy, J. Orthel, and L. Young, “Boeing 120 MeV RF Linac Injector Design and Accelerator Performance Comparison with PARMELA”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 657-660.
- L. Liu, J. Qiu, J. Tang, and T. Wei, “Simulations of Longitudinal Phase Space Painting for the CSNS RCS Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP054, pp. 1403-1405.
- A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 358-360.
- C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105.
- T. Lefevre, H.-H. Braun, E. Bravin, C. Dutriat, and C. P. Welsch, “Segmented Beam Dump for Time Resolved Spectrometry on a High Current Electron Beam”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC14, pp. 340-342.
- P. B. Larsen et al., “Intense Sheet Electron Beam Transport in a Periodically Cusped Magnetic Field”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP035, pp. 1558-1560.
- K. Shinto et al., “A Negative Ion Beam Probe for Diagnostics of a High Intensity Ion Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE018, pp. 999-1001.
- S. A. Glukhov and E. B. Levichev, “Realistic Approach for Beam Dynamics Simulation with Synchrotron Radiation in High Energy Circular Lepton Colliders”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 147-150.
- K. Gross and J. Adamy, “Comparison of LLRF Control Approaches for High Intensity Hadron Synchrotrons: Design and Performance”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC076, pp. 3464-3466.
- M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
- B. Singh, R. Bartolini, R. T. Fielder, I. P. S. Martin, and J. Rowland, “Beam Dynamics Effect of Insertion Devices at Diamond Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE088, pp. 4731-4733.
- J. Norem, P. Bauer, J. Sebastian, and D. N. Seidman, “Atom Probe Tomography Studies of RF Materials”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAC008, pp. 612-614.
- J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2320-2323.
- P. Duval, J. Bobnar, I. Kriznar, T. Kusterle, M. Lomperski, and S. Weisse, “New ACOP Beans and TINE General Purpose Diagnostic Applications”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP034, pp. 161-163.
- T. B. Petersen, J. S. Diamond, N. Liu, P. S. Prieto, D. Slimmer, and A. C. Watts, “Fermilab Switchyard Resonant Beam Position Monitor Electronics Upgrade Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 352-354.
- M. Jablonka, B. Aune, and Ch. Magne, “A Scheme for a Fully Superconducting Electron Injector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 478-481.
- M. N. H. Comsan, “Tandem Accelerator Facility at Inshas”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP05C, pp. 2442-2444.
- M. M. Paoluzzi et al., “The New 1-18 MHz Wideband RF System for the CERN PS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3063-3065.
- C. Adolphsen et al., “LIAR - A Computer Program for the Simulation and Modeling of High Performance Linacs”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP27C, pp. 1156-1158.
- P. Strolin and E. J. N. Wilson, “The Effect of Momentum Spread in Slow Extraction at an Integer Resonance - A Theoretical Study”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 255-260.
- E. Bravin et al., “Collision Rate Monitors for LHC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN067, pp. 4171-4173.
- G. Hemmie, “DESY II, a New Injector for the DESY Storage Rings PETRA and DORIS II”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2028-2031.
- G. L. Orlandi et al., “FERMI-PSI Collaboration on Nano-Fabricated Wire-Scanners With Sub-Micrometer Resolution: Developments and Measurements.”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 249-252.
- G. Schuenemann, P. Hartmann, D. Schirmer, G. Schmidt, P. Towalski, and T. Weis, “FPGA Based Fast Orbit Feedback Data Acquisition System for Electron and Hadron Storage Rings”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC16, pp. 82-84.
- K. Inoue, M. Hara, Y. Kawashima, and T. Nakamura, “Current Status of RF System for the SPring-8”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 667-670.
- F. Hern?índez et al., “Investigation of Thermal Instabilities in the ALBA Cooling System, Based on Numerical Simulations and Experimental Measurements”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 153.
- V. Da Silva et al., “DAQ System Based on Sardana and PandABox for Combined SAXS, Fluorescence and UV-Vis Spectroscopy Techniques at MAX IV CoSAXS Beamline”, presented at the 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO09, unpublished.
- T. Abe et al., “Application of Highly-Pure Copper Lining to Normal-Conducting RF Cavities for an Electron-Positron Super B Factory”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT007, pp. 1051-1053.
- L. Ferrucci, C. Pagani, and L. Serafini, “Short RF Pulse Propagation in a Traveling Wave Structure”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-45, pp. 640-642.
- M. S. Beck et al., “Studies of Transverse Instabilities in the CERN SPS”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 291-295.
- G. Jackson, “Bunched Beam Stochastic Cooling”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2532-2537.
- T.-Y. Lee, J. Lee, S. Shin, C. U. Choi, and M. Chung, “Cyclotrons for Accelerator-Driven Systems”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 305-307.
- Y. S. Chung, “Status of RAON Superconducting Linac at IBS”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOIAA02, unpublished.
- C. U. Choi, M. Chung, G. Hahn, J. Lee, T.-Y. Lee, and S. Shin, “Simulation Code Development for High-Power Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 68-70.
- P. Hartmann, D. Schirmer, G. Schuenemann, P. Towalski, and T. Weis, “Fast Orbit Feedbacks for DELTA”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP066, pp. 791-793.
- P. J. Tallerico, “Low Frequency Klystrons for Accelerator Applications”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1692-1695.
- G. O. Bolme et al., “Analysis of High-Power Conditioning for Accelerator Cavities Using a Six-Port Reflectometer”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-34, pp. 136-138.
- R. A. Bosch, K. J. Kleman, and R. A. Legg, “Simulated Performance of the Wisconsin Superconducting Electron Gun”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD075, pp. 1572-1574.
- N. Chelidze, R. Ainsworth, and K. J. Hazelwood, “The Effect of the Main Injector Ramp on the Recycler”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 90-92.
- A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and G. C. Stutzin, “Laser Diagnostics of H- formation in a Magnetic Multicusp Ion Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1916-1919.
- G. D. Kim et al., “Facility for MeV Degree Neutron Capture Cross Section at KIGAM”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19009, pp. XX-XX.
- C.-S. Huang, B.-Y. Chen, C.-K. Kuan, W.-Y. Lai, T.-C. Tseng, and H.-S. Wang, “Anodic bonding of silicon and glass for bent monochromator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM028, pp. 4953-4956.
- N. V. Avreline, Y. Bylinskii, B. Jakovljevic, Y. Ma, and V. Zvyagintsev, “The Design of 1.1 MW RF Dummy Load for the RF System of 520 MeV Cyclotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3911-3913.
- S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz Pulsed Klystron for the Spallation Neutron Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE119, pp. 2323-2325.
- J. Heller, T. Flisgen, C. Schmidt, and U. van Rienen, “Quantification of Geometric Uncertainties in Single Cell Cavities for BESSY VSR using Polynomial Chaos”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 415-417.
- J. D. Sherman, P. Allison, and H. V. Smith, “Beam Potential Measurement of an Intense H- Beam by Use of the Emissive Probe Technique”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1973-1976.
- X. Sun and G. Decker, “Low-Frequency Time Domain Numerical Studies of Transition Radiation in a Cylindrical Waveguide”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP078, pp. 3383-3385.
- I. Kourbanis et al., “Current and Future High Power Operation of Fermilab Main Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP060, pp. 1421-1423.
- H. Takeda, “Transient Analysis of a Coupled Accelerator and Decelerator System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1161-1164.
- P. Golonka, M. Gonzalez-Berges, J. Hofer, and A. Voitier, “Database Archiving System for Supervision Systems at CERN: a Successful Upgrade Story”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 129-132.
- K. N. Leung, W. F. DiVergilio, C. A. Hauck, W. B. Kunkel, and D. S. McDonald, “Optimization of an RF Driven H- ion Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1919-1922.
- S. Chunjarean and S. Shin, “Insertion Devices and Beam Dynamics in the PLS-II Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC072, pp. 2187-2189.
- H. Okamoto, K. Ito, and H. Higaki, “Non-neutral Plasma Traps for Accelerator-free Experiments on Space-charge-dominated Beam Dynamics”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOCS1, pp. 46-50.
- L. E. Sakazaki, R. M. Littauer, R. H. Siemann, and R. M. Talman, “Anomalous"”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. -Nonlinearly-Current-Dependent-Damping-in-CESR".
- V. Derenchuk, R. Brown, H. Petri, E. Stephenson, and M. Wedekind, “Emittance Measurements of the High Intensity Polarized Ion Source at IUCF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC08, pp. 1010-1012.
- W. Chupp, D. Clark, R. Richter, J. Staples, and E. Zajec, “Operation of a High-Current Xenon Source”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3036-3039.
- S. G. Arnold et al., “Optimizing Growth of Niobium-3 Tin Through Pre-nucleation Chemical Treatments”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB093, pp. 337-341.
- M. Inoue, V. Kapin, and A. Noda, “Design Study of a Multiple-Beam RFQ Version of a High-Current Linac Injector for a Neutron Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP18C, pp. 725-727.
Back to search