Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Abo-Bakr, K. B??rkmann, V. D??rr, and J. Kolbe, “MULTIPOLE MAGNETS FOR THE METROLOGY LIGHT SOURCE (PTB, BERLIN)”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOHP11, pp. XX-XX.
[n] A. Jakob, H. Klein, A. Lakatos, and J. Pozimski, “Extraction and Low Energy Transport of Negative Ions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP21C, pp. 1400-1402.
[n] S. Kopp et al., “The NuMI Hadronic Hose”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH160, pp. 1598-1600.
[n] E. Viklund, D. Burk, D. Seidman, and S. Posen, “Mechanical Polishing of Nb3Sn Thin-Film Cavities”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA180, unpublished.
[n] R. Valizadeh et al., “First Full Cryogenic Test of the SRF Thin Film Test Cavity”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 644-646. doi:10.18429/JACoW-SRF2017-TUPB104
[n] M. G. Minty, C. Adolphsen, L. J. Hendrickson, R. Sass, T. Slaton, and M. Woodley, “Feedback Performance at the Stanford Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB03, pp. 662-664.
[n] A. C. Paul, S. L. Allen, F. W. Chambers, Y.-J. Chen, F. J. Deadrick, and W. C. Turner, “ETA-II Beam Brightness Measurement”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3106-3109.
[n] R. F. Lambiase, W. Buxton, B. Oerter, S. Peng, J. Pepe, and J. Smith, “Performance Results for the BNL PSI Designed for the SNS and it's Application to Other Accelerators”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE120, pp. 2493-2495.
[n] G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148.
[n] Y.-C. Chao et al., “Achieving Beam Quality Requirements for Parity Experiments at Jefferson Lab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT163, pp. 1509-1511.
[n] C. Contreras-Martinez, Y. M. Pischalnikov, W. Schappert, A. I. Sukhanov, and J. C. Yun, “Microphonics Studies at STC in Fermilab”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 743-746. doi:10.18429/JACoW-NAPAC2019-WEPLM66
[n] L. Celona et al., “Commissioning of the AISHA Ion Source at INFN-LNS”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 10-13. doi:10.18429/JACoW-ECRIS2018-MOB3
[n] J. P. Lidestri, V. Bailey, J. A. Edighoffer, S. D. Putnam, M. G. Tiefenback, and D. Wake, “Experimental Observations of Beam Transport in Twisted Quadrupole Fields”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3120-3123.
[n] S. Wilde et al., “Physical Vapour Deposition of NbTiN Thin Films for Superconducting RF Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1102-1104. doi:10.18429/JACoW-IPAC2017-MOPVA104
[n] W. Smith et al., “Status of the CLARA Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1162. doi:10.18429/JACoW-ICALEPCS2019-WEPHA037
[n] J. Kaugerts, P. F. Dahl, I. Polk, and W. Sampson, “ISABELLE Insertion Quadrupoles”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4036-4039.
[n] R. L. Kustom, F. R. Brumwell, E. F. Parker, C. W. Potts, and R. B. Wehrle, “A New Diagnostic System for Studying the Injector and Injection at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 518-523.
[n] T. Rinckel et al., “Construction Plans for the LENS Proton Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP050, pp. 156-158.
[n] M. Mayerhofer and G. Dollinger, “Support structures and their removal improve performance of additively manufactured RF cavities”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS67, unpublished.
[n] B. Cros et al., “Electron Injector for Multi-Stage Laser-Driven Plasma Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3244-3246. doi:10.18429/JACoW-IPAC2017-WEPVA001
[n] E. Tanabe, M. Bayer, and M. Trail, “A Small Diameter Standing Wave Linear Accelerator Structure”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2975-2978.
[n] G. Kazakevich, R. Johnson, T. Khabiboulline, V. Yakovlev, and Y. Eidelman, “On the life expectance of high-power CW magnetrons for SRF accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 513-515. doi:10.18429/JACoW-LINAC2024-TUPB091
[n] T. Kroc, “A Quadrupole Magnet for the Fermilab Linac Upgrade”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2378-2381.
[n] G. Bassato and W. Zou, “Experience Using Credit-Card Size Boards Based on Coldfire Processors and Running Under ucLinux”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP011, pp. 189-191.
[n] B. Campbell and R. Ranganathan, “An Experiemental and Analytical Study of a Buoyancy Driven Cooling System for a Particle Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1402-1405.
[n] J. Friedrich et al., “Properties of the GSI HLI-RFQ Structure”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3044-3047.
[n] J. A. Edighoffer, “Beam Breakup Considerations in the Design of Multiple Off-Axis Gaps in an Induction Accelerator Cell for SLIA”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3117-3120.
[n] J. Y. Liu, H. B. Chen, A. Grudiev, J. Shi, and H. Zha, “Wakefield Suppression in the Main LINAC of the Klystron-Based First Stage of CLIC at 380 GeV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2899-2902. doi:10.18429/JACoW-IPAC2019-WEPRB043
[n] C. Lingwood, G. Burt, K. Gunn, and J. D. A. Smith, “Evolutionary Algorithms in the Design of Crab Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC056, pp. 1850-1852.
[n] Y. Chung et al., “Local Beam Position Feedback Experiments on the ESRF Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ15, pp. 2699-2701.
[n] F. Zimmermann et al., “CLIC Polarized Positron Source Based on Laser Compton Scattering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS060, pp. 2520-2522.
[n] R. M. Lill, G. Decker, J. E. Hoyt, X. Sun, and B. X. Yang, “Design, Installation, and Commissioning Results for Suppressing Rogue TE Modes Impacting Vertical BPM Readings of the APS Storage Ring”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG012, pp. 50-52.
[n] B. Groussin, M. Martinez-Calderon, E. Granados, and B. Marsh, “Simulation of plasmonic effects in nanostructured copper surfaces for field-assisted photoemission”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1354-1357. doi:10.18429/JACoW-IPAC2023-TUPA002
[n] L. Smith, “Beam Dynamics in Heavy Ion Induction Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper D101, pp. 111-115.
[n] M. A. Gundersen, G. Kirkman, R. Liou, and T. Hsu, “High Current, Low Energy Electron Beams Produced During the High Current Phase of a Pseudospark”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3066-3069.
[n] P. Bauer et al., “Synchrotron Radiation Absorbers for Hadron Colliders”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO015, pp. 2541-2543.
[n] A. Stevens, T. Clifford, and R. Frankel, “Distribution of Computer Functionality for Accelerator Control at the Brookhaven AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2023-2026.
[n] J. Jarvis et al., “The Optical Stochastic Cooling Program at Fermilab”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA039, unpublished.
[n] J. M. Garland et al., “A Discharge Plasma Source Development Platform for Accelerators: The ADVANCE Lab at DESY”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1886-1888. doi:10.18429/JACoW-IPAC2022-WEPOPT021
[n] T. Overton, J. Jones, T. Pacey, L. Reid, and E. Snedden, “Simulation study of beam-driven plasma wakefield experiments on CLARA”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1353-1356. doi:10.18429/JACoW-IPAC2025-TUPM086
[n] C. Swain, ?û. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “A Modified Nomarski Interferometer to Study Supersonic Gas Jet Density Profiles”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 385-388. doi:10.18429/JACoW-IPAC2022-MOPOPT054
[n] M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4967-4970. doi:10.18429/JACoW-IPAC2023-THPM035
[n] J. Juanhuix and M. Traveria, “Magnetic design and light characteristics of a Wiggler for the LLS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP21G, pp. 2228-2230.
[n] J. Dietrich, C. Boehme, A. H. Botha, J. L. Conradie, P. F. Rohwer, and T. Weis, “Beam Profile Measurements Based on Light Radiation of Atoms Excited by the Particle Beam”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN020, pp. 3955-3957.
[n] S. Hunt, D. Mathieson, K. Low, and C. Kalbfleisch, “High Speed Serial Communications for Control Systems”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1826-1829.
[n] S. Sampayan et al., “High Gradient Insulator Technology for the Dielectric Wall Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA19, pp. 1269-1271.
[n] R. Averill et al., “Superconducting Solenoids for the Polarized Electron Spin Control System of the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P008, pp. 3407-3409.
[n] Z. Amirkhanyan et al., “Comparison of measurements and simulation results of dose for the FLASH radiation therapy beamline at PITZ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4996-4999. doi:10.18429/JACoW-IPAC2023-THPM049
[n] M. Stirbet et al., “RF Conditioning and Testing of Fundamental Power Couplers for SNS Superconducting Cavity Production”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT083, pp. 4132-4134.
[n] D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT037, pp. 2476-2478.
[n] A. Romanov, J. Santucci, and G. Stancari, “Experimental 4D tracking of a single electron in IOTA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3359-3362. doi:10.18429/JACoW-IPAC2023-WEPL108
[n] R. M. Mobley, G. Gammel, and A. W. Maschke, “Gabor Lenses”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3112-3115.
[n] H. Podlech et al., “The MYRRHA Project”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 945-950. doi:10.18429/JACoW-NAPAC2019-THZBA2
[n] M. Martinello et al., “Trapped Flux Surface Resistance Analysis for Different Surface Treatments”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB015, pp. 115-119.
[n] S. V. Khruschev et al., “9 Tesla Superbend for BESSY-2”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14005, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Abo-Bakr, K. B??rkmann, V. D??rr, and J. Kolbe, “MULTIPOLE MAGNETS FOR THE METROLOGY LIGHT SOURCE (PTB, BERLIN)”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOHP11, pp. XX-XX.
- A. Jakob, H. Klein, A. Lakatos, and J. Pozimski, “Extraction and Low Energy Transport of Negative Ions”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP21C, pp. 1400-1402.
- S. Kopp et al., “The NuMI Hadronic Hose”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH160, pp. 1598-1600.
- E. Viklund, D. Burk, D. Seidman, and S. Posen, “Mechanical Polishing of Nb3Sn Thin-Film Cavities”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA180, unpublished.
- R. Valizadeh et al., “First Full Cryogenic Test of the SRF Thin Film Test Cavity”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 644-646.
- M. G. Minty, C. Adolphsen, L. J. Hendrickson, R. Sass, T. Slaton, and M. Woodley, “Feedback Performance at the Stanford Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPB03, pp. 662-664.
- A. C. Paul, S. L. Allen, F. W. Chambers, Y.-J. Chen, F. J. Deadrick, and W. C. Turner, “ETA-II Beam Brightness Measurement”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3106-3109.
- R. F. Lambiase, W. Buxton, B. Oerter, S. Peng, J. Pepe, and J. Smith, “Performance Results for the BNL PSI Designed for the SNS and it's Application to Other Accelerators”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE120, pp. 2493-2495.
- G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148.
- Y.-C. Chao et al., “Achieving Beam Quality Requirements for Parity Experiments at Jefferson Lab”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT163, pp. 1509-1511.
- C. Contreras-Martinez, Y. M. Pischalnikov, W. Schappert, A. I. Sukhanov, and J. C. Yun, “Microphonics Studies at STC in Fermilab”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 743-746.
- L. Celona et al., “Commissioning of the AISHA Ion Source at INFN-LNS”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 10-13.
- J. P. Lidestri, V. Bailey, J. A. Edighoffer, S. D. Putnam, M. G. Tiefenback, and D. Wake, “Experimental Observations of Beam Transport in Twisted Quadrupole Fields”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3120-3123.
- S. Wilde et al., “Physical Vapour Deposition of NbTiN Thin Films for Superconducting RF Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1102-1104.
- W. Smith et al., “Status of the CLARA Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1162.
- J. Kaugerts, P. F. Dahl, I. Polk, and W. Sampson, “ISABELLE Insertion Quadrupoles”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4036-4039.
- R. L. Kustom, F. R. Brumwell, E. F. Parker, C. W. Potts, and R. B. Wehrle, “A New Diagnostic System for Studying the Injector and Injection at the Zero Gradient Synchrotron (ZGS)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 518-523.
- T. Rinckel et al., “Construction Plans for the LENS Proton Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP050, pp. 156-158.
- M. Mayerhofer and G. Dollinger, “Support structures and their removal improve performance of additively manufactured RF cavities”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS67, unpublished.
- B. Cros et al., “Electron Injector for Multi-Stage Laser-Driven Plasma Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3244-3246.
- E. Tanabe, M. Bayer, and M. Trail, “A Small Diameter Standing Wave Linear Accelerator Structure”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2975-2978.
- G. Kazakevich, R. Johnson, T. Khabiboulline, V. Yakovlev, and Y. Eidelman, “On the life expectance of high-power CW magnetrons for SRF accelerators”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 513-515.
- T. Kroc, “A Quadrupole Magnet for the Fermilab Linac Upgrade”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2378-2381.
- G. Bassato and W. Zou, “Experience Using Credit-Card Size Boards Based on Coldfire Processors and Running Under ucLinux”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP011, pp. 189-191.
- B. Campbell and R. Ranganathan, “An Experiemental and Analytical Study of a Buoyancy Driven Cooling System for a Particle Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1402-1405.
- J. Friedrich et al., “Properties of the GSI HLI-RFQ Structure”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3044-3047.
- J. A. Edighoffer, “Beam Breakup Considerations in the Design of Multiple Off-Axis Gaps in an Induction Accelerator Cell for SLIA”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3117-3120.
- J. Y. Liu, H. B. Chen, A. Grudiev, J. Shi, and H. Zha, “Wakefield Suppression in the Main LINAC of the Klystron-Based First Stage of CLIC at 380 GeV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2899-2902.
- C. Lingwood, G. Burt, K. Gunn, and J. D. A. Smith, “Evolutionary Algorithms in the Design of Crab Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC056, pp. 1850-1852.
- Y. Chung et al., “Local Beam Position Feedback Experiments on the ESRF Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ15, pp. 2699-2701.
- F. Zimmermann et al., “CLIC Polarized Positron Source Based on Laser Compton Scattering”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS060, pp. 2520-2522.
- R. M. Lill, G. Decker, J. E. Hoyt, X. Sun, and B. X. Yang, “Design, Installation, and Commissioning Results for Suppressing Rogue TE Modes Impacting Vertical BPM Readings of the APS Storage Ring”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG012, pp. 50-52.
- B. Groussin, M. Martinez-Calderon, E. Granados, and B. Marsh, “Simulation of plasmonic effects in nanostructured copper surfaces for field-assisted photoemission”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA002, pp. 1354-1357.
- L. Smith, “Beam Dynamics in Heavy Ion Induction Linacs”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper D101, pp. 111-115.
- M. A. Gundersen, G. Kirkman, R. Liou, and T. Hsu, “High Current, Low Energy Electron Beams Produced During the High Current Phase of a Pseudospark”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3066-3069.
- P. Bauer et al., “Synchrotron Radiation Absorbers for Hadron Colliders”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO015, pp. 2541-2543.
- A. Stevens, T. Clifford, and R. Frankel, “Distribution of Computer Functionality for Accelerator Control at the Brookhaven AGS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2023-2026.
- J. Jarvis et al., “The Optical Stochastic Cooling Program at Fermilab”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA039, unpublished.
- J. M. Garland et al., “A Discharge Plasma Source Development Platform for Accelerators: The ADVANCE Lab at DESY”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1886-1888.
- T. Overton, J. Jones, T. Pacey, L. Reid, and E. Snedden, “Simulation study of beam-driven plasma wakefield experiments on CLARA”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM086, pp. 1353-1356.
- C. Swain, ?û. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “A Modified Nomarski Interferometer to Study Supersonic Gas Jet Density Profiles”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 385-388.
- M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM035, pp. 4967-4970.
- J. Juanhuix and M. Traveria, “Magnetic design and light characteristics of a Wiggler for the LLS”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP21G, pp. 2228-2230.
- J. Dietrich, C. Boehme, A. H. Botha, J. L. Conradie, P. F. Rohwer, and T. Weis, “Beam Profile Measurements Based on Light Radiation of Atoms Excited by the Particle Beam”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN020, pp. 3955-3957.
- S. Hunt, D. Mathieson, K. Low, and C. Kalbfleisch, “High Speed Serial Communications for Control Systems”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1826-1829.
- S. Sampayan et al., “High Gradient Insulator Technology for the Dielectric Wall Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA19, pp. 1269-1271.
- R. Averill et al., “Superconducting Solenoids for the Polarized Electron Spin Control System of the MIT-Bates South Hall Ring (SHR)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P008, pp. 3407-3409.
- Z. Amirkhanyan et al., “Comparison of measurements and simulation results of dose for the FLASH radiation therapy beamline at PITZ”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM049, pp. 4996-4999.
- M. Stirbet et al., “RF Conditioning and Testing of Fundamental Power Couplers for SNS Superconducting Cavity Production”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT083, pp. 4132-4134.
- D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT037, pp. 2476-2478.
- A. Romanov, J. Santucci, and G. Stancari, “Experimental 4D tracking of a single electron in IOTA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL108, pp. 3359-3362.
- R. M. Mobley, G. Gammel, and A. W. Maschke, “Gabor Lenses”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3112-3115.
- H. Podlech et al., “The MYRRHA Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 945-950.
- M. Martinello et al., “Trapped Flux Surface Resistance Analysis for Different Surface Treatments”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB015, pp. 115-119.
- S. V. Khruschev et al., “9 Tesla Superbend for BESSY-2”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14005, pp. XX-XX.
Back to search