Favourites
For Word
[n] S. C. P. Albright, F. Asvesta, B. Bielawski, C. Bracco, P. K. Skowro, and R. Wegner, “Two-Dimensional Longitudinal Painting at Injection into the CERN PS Booster”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 563-566. doi:10.18429/JACoW-HB2023-THBP38
[n] W. X. Cheng, B. Bacha, Y. Hu, O. Singh, H. Xu, and D. Teytelman, “Commissioning of Bunch-by-Bunch Feedback System for NSLS2 Storage Ring”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD27, pp. 707-711.
[n] Y. Funakoshi, N. Iida, T. Suwada, T. Kawamoto, and M. Kikuchi, “Beam Tests of a Wire Scanner for the KEKB Injector Linac and Beam Transport Line”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D058, pp. 537-539.
[n] R. V. Osborne, “Design of a Digital Logarithmic Ratemeter Circuit”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1952-1958.
[n] E. Adli, “The CLIC Project - Status and Prospects”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOYBA1, pp. 6-10.
[n] G. B. Bai, “An Arc-Discharge Ion Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 279-283.
[n] Y. Ogawa et al., “New Streak-Camera System for the KEKB Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D057, pp. 534-536.
[n] A. S. Chikhachev and H. Y. Barminova, “The Behavior of Powerful Relativistic Electron Beam With Elliptical Cross-Section in Longitudinal Magnetic Field”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 374-376. doi:10.18429/JACoW-RUPAC2016-WEPSB009
[n] M. Masuzawa and K. Egawa, “Preliminary Results of Magnet Measurements for the KEK B-Factory Quadrupole Magnets”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D070, pp. 570-572.
[n] S. Vilcins, M. Holz, M. Lemke, D. Noelle, and Ch. Wiebers, “The Influences of Material Properties to Micro Damages on Vacuum Chamber CF Flanges”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 63-70. doi:10.18429/JACoW-MEDSI2016-MOPE27
[n] K. J. Gofron, Y. Q. Cai, D. S. Coburn, and A. Suvorov, “Temperature Control of Crystal Optics for Ultrahigh-Resolution Applications”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 899-902. doi:10.18429/JACoW-ICALEPCS2023-TUPDP132
[n] Yu. P. Buzulokov, E. M. Hodakov, Yu. L. Jupinov, N. A. Putjatin, and N. I. Venikov, “Magnetic Field Design and Measurement for the Kurchatov Institute Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-17, pp. 205-206.
[n] Y. Zhang, “Proposal of a New Type of Resonant Power Supply for Synchrotron Ring Magnets”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D063, pp. 552-554.
[n] T. Hori and T. Takayama, “Development of New Compact SR Ring "AURORA-2"”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D017, pp. 710-712.
[n] M. G. Fedurin, P. Mortazavi, J. B. Murphy, and G. Rakowsky, “Upgrade Alternatives for the NSLS Superconducting Wiggler”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS071, pp. 1335-1337.
[n] K. S. White, “Workshop Summaries”, presented at the ICALEPCS'23, Cape Town, South Africa, Oct. 2023, paper WEWBCO01, unpublished.
[n] M. Tobiyama and E. Kikutani, “Bunch-by-Bunch Feedback Systems for KEKB Rings”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D059, pp. 540-542.
[n] T. Hori, T. Takayama, and H. Tsutsui, “Compact Synchrotron Radiation Source 'AURORA-2' with 2.7 T Normal Conducting Bending Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP128G, pp. 709-711.
[n] C. Hsu, C.-T. Wang, and P.-C. Lai, “Design Study for an Undulator Photon Beam Position and Profile Monitor”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P065, pp. 2047-2048.
For LaTeX
Use Complete Form
For BibTeX
References
- S. C. P. Albright, F. Asvesta, B. Bielawski, C. Bracco, P. K. Skowro, and R. Wegner, “Two-Dimensional Longitudinal Painting at Injection into the CERN PS Booster”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP38, pp. 563-566.
- W. X. Cheng, B. Bacha, Y. Hu, O. Singh, H. Xu, and D. Teytelman, “Commissioning of Bunch-by-Bunch Feedback System for NSLS2 Storage Ring”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD27, pp. 707-711.
- Y. Funakoshi, N. Iida, T. Suwada, T. Kawamoto, and M. Kikuchi, “Beam Tests of a Wire Scanner for the KEKB Injector Linac and Beam Transport Line”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D058, pp. 537-539.
- R. V. Osborne, “Design of a Digital Logarithmic Ratemeter Circuit”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1952-1958.
- E. Adli, “The CLIC Project - Status and Prospects”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOYBA1, pp. 6-10.
- G. B. Bai, “An Arc-Discharge Ion Source”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 279-283.
- Y. Ogawa et al., “New Streak-Camera System for the KEKB Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D057, pp. 534-536.
- A. S. Chikhachev and H. Y. Barminova, “The Behavior of Powerful Relativistic Electron Beam With Elliptical Cross-Section in Longitudinal Magnetic Field”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 374-376.
- M. Masuzawa and K. Egawa, “Preliminary Results of Magnet Measurements for the KEK B-Factory Quadrupole Magnets”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D070, pp. 570-572.
- S. Vilcins, M. Holz, M. Lemke, D. Noelle, and Ch. Wiebers, “The Influences of Material Properties to Micro Damages on Vacuum Chamber CF Flanges”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 63-70.
- K. J. Gofron, Y. Q. Cai, D. S. Coburn, and A. Suvorov, “Temperature Control of Crystal Optics for Ultrahigh-Resolution Applications”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP132, pp. 899-902.
- Yu. P. Buzulokov, E. M. Hodakov, Yu. L. Jupinov, N. A. Putjatin, and N. I. Venikov, “Magnetic Field Design and Measurement for the Kurchatov Institute Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-17, pp. 205-206.
- Y. Zhang, “Proposal of a New Type of Resonant Power Supply for Synchrotron Ring Magnets”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D063, pp. 552-554.
- T. Hori and T. Takayama, “Development of New Compact SR Ring "AURORA-2"”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D017, pp. 710-712.
- M. G. Fedurin, P. Mortazavi, J. B. Murphy, and G. Rakowsky, “Upgrade Alternatives for the NSLS Superconducting Wiggler”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS071, pp. 1335-1337.
- K. S. White, “Workshop Summaries”, presented at the 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WEWBCO01, unpublished.
- M. Tobiyama and E. Kikutani, “Bunch-by-Bunch Feedback Systems for KEKB Rings”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D059, pp. 540-542.
- T. Hori, T. Takayama, and H. Tsutsui, “Compact Synchrotron Radiation Source 'AURORA-2' with 2.7 T Normal Conducting Bending Magnets”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP128G, pp. 709-711.
- C. Hsu, C.-T. Wang, and P.-C. Lai, “Design Study for an Undulator Photon Beam Position and Profile Monitor”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P065, pp. 2047-2048.
Back to search