Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. A. Gavrilov, A. Feschenko, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Beam Cross Section Monitor for INR Linac”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP085, pp. 605-607.
[n] A. DeSimone et al., “Design study for a transverse deflecting cavity based de-chirper”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM015, unpublished.
[n] P. Huelsmann, H.-W. Glock, H. Klein, and M. Kurz, “Determination of Field Strength and Quality Factor of Heavily HOM Damped Accelerator Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1307-1310.
[n] J. Kamiya et al., “Improvements of Vacuum System in J-PARC 3 GeV Synchrotron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3408-3411. doi:10.18429/JACoW-IPAC2017-WEPVA062
[n] J. G. M. Kleeven et al., “The IBA Superconducting Synchrocyclotron Project S2C2”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO4PB02, pp. 115-119.
[n] H. Braun, K. Huebner, and W. Joho, “Decay Rates and Average Luminosity in a B-Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 141-144.
[n] Z. Zhao, S. Liu, and C. H. Wang, “BEPCII EPICS Data Archiving and Retrieving System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP002, pp. 411-413.
[n] Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454.
[n] J. M. Potter, “A Resonantly Coupled, Waveguide RF Power Manifold for Linear Accelerators”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F10, pp. 362-362.
[n] H. Kaji et al., “New Event Timing System for Damping Ring at SuperKEKB”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 629-632. doi:10.18429/JACoW-ICALEPCS2015-WEC3O04
[n] D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2775-2778. doi:10.18429/JACoW-IPAC2024-WEPS38
[n] M. Vadrucci et al., “Diagnostics Methods for the Medium Energy Proton Beam Extracted by the TOP IMPLART Linear Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4673-4675. doi:10.18429/JACoW-IPAC2017-THPVA091
[n] Q. Qin et al., “Overview of ESRF-EBS's four-year operation and strategy for further upgrade”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS052, unpublished.
[n] J. Cai et al., “High Level Software for 4.8 Ghz LHC Schottky System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP218, pp. 507-509.
[n] R. L. Warnock, “Coherent Synchrotron Radiation and Space Charge for a 1-D Bunch on an Arbitrary Planar Orbit”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS083, pp. 4255-4257.
[n] I. Hwang et al., “Coupling Diagnostics and Control at PLS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE011, pp. 4533-4535.
[n] E. Bozoki, A. Friedman, and S. Ramamoorthy, “First Results with a Nonlinear Digital Orbit Feedback System at the NSLS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ14, pp. 2696-2698.
[n] L. K. Mestha and C. W. Planner, “Application of System Identification Techniques to an RF Cavity Tuning Loop”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 982-985.
[n] A. Denker et al., “Status of the HZB Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 253-255. doi:10.18429/JACoW-CYCLOTRONS2019-TUC02
[n] D. M. Zhou and K. Ohmi, “Interference of CSR Fields in a Curved Waveguide”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS007, pp. 604-606.
[n] J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
[n] C. Mitsuda, T. Honiden, K. Kobayashi, T. Kobayashi, S. Sasaki, and N. Sekine, “Solid-state Compact Kicker Pulsar using Strip-line Type Blumlein with SIC-MOSFET in Spring-8”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3585-3587. doi:10.18429/JACoW-IPAC2016-THPMW020
[n] J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
[n] A. A. Pryanichnikov, M. A. Belikhin, A. P. Chernyaev, V. Rykalin, A. E. Shemyakov, and P. B. Zhogolev, “Development of the Low Intensity Extraction Beam Control System at Protom Synchrotron for Proton Radiography Implementation”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 439-442. doi:10.18429/JACoW-RuPAC2021-WEPSC55
[n] F. Roncarolo, C. Carli, M. Chanel, L. D. Dumas, and R. Scrivens, “Design and Validation with Measurements of the LEIR Injection Line”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH046, pp. 2020-2022.
[n] J. Rose, R. Biscardi, W. Broome, R. D, J. Keane, and J. M. Wang, “Diagnosis and Cure of a Transverse Instability in the NSLS VUV Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1794-1797.
[n] H. A. Day, M. J. Barnes, F. Caspers, E. M?®tral, B. Salvant, and R. M. Jones, “Evaluation of the Beam Coupling Impedance of New beam Screen Designs for the LHC Injection Kicker Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME033, pp. 1649-1651.
[n] H. Nesemann, W. Brefeld, F. Brinker, W. Decking, O. Kaul, and B. Sarau, “DORIS III as a Dedicated Source for Synchrotron Radiation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA02, pp. 195-197.
[n] J. S. Chai et al., “Operation Experiences of MC50 Cyclotron, KIRAMS”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10006, pp. XX-XX.
[n] W. Schnell, “Report on the ISR”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1358-1363.
[n] K. Kranz, K. Desch, D. Elsner, and M. T. Switka, “Studies for a Laser Wakefield Driven Injector at ELSA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2686-2688. doi:10.18429/JACoW-IPAC2022-THPOPT042
[n] L. Calabretta, A. Calanna, D. Campo, M. M. Maggiore, L. A. C. Piazza, and F. Meot, “A Superconducting Ring Cyclotron for the DAEALUS Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD026, pp. 421-423.
[n] S. A. Nikitin et al., “Development of Resonance Depolarization Method at VEPP-4 for High Precision Measurement of Tau Lepton Mass”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH041, pp. 3317-3319.
[n] N. R. Stevenson and W. Z. Gelbart, “External High Current Targetry for Radioisotope Production”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IV-11, pp. 196-197.
[n] A. Akiyama et al., “KEKB Control System: The Present and the Future”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL3, pp. 343-345.
[n] K. Fukami et al., “Resonance Frequency Feedback System for a Precise Magnet Alignment using Multi-vibrating Wires”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 277-279. doi:10.18429/JACoW-IPAC2014-MOPRO081
[n] J. Allinger, G. Danby, J. Jackson, and A. Prodell, “Ultra Stable High Field Superconducting Dipoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1323-1325.
[n] A. Ponton et al., “ESS Normal Conducting Linac Status and Plans”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP044, pp. 948-950.
[n] K. Seiya et al., “Estimation of the required current on the anode power supply for high power operation in the J-PARC Main Ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS132, unpublished.
[n] J. M. Koch, E. Plouviez, and F. Uberto, “A Fast Global Feedback System to Correct the Beam Position Deviation in the ESRF Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP26G, pp. 1729-1731.
[n] D. Raparia, M. Okamura, T. Kanesue, K. Ishibashi, and Y. Yonemura, “Design Study of a DPIS Injector for a Heavy Ion FFAG”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP045, pp. 172-174.
[n] M. Pont et al., “Power Converters for ALBA Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD067, pp. 3254-3256.
[n] D. Paulic et al., “Challenges for personnel safety systems during commissioning of ESS normal conducting linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4063-4066. doi:10.18429/JACoW-IPAC2023-THPA048
[n] W. Busse and C. Rethfeldt, “The ISL-Control-System Upgrade: A Move from an In-House Implementation to a Commercial Control-System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU213, pp. XX-XX.
[n] G. Shvets, N. J. Fisch, A. Pukhov, and J. Meyer-ter-Vehn, “Generation of Phase-Controlled Accelerating Structures in Plasma”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA126, pp. 3675-3677.
[n] K. H. Yoo, M. Chung, and H. J. Son, “Studies of Buffer Gas Cooling of Ion Beams in an RFQ Cooler and Their Transport to the EBIS Charge Breeder”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 248-250. doi:10.18429/JACoW-IPAC2016-MOPMR012
[n] R. Miracoli et al., “A Microwave Ion Source for Pulsed Proton Beam Production at ESS-Bilbao”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH018, pp. 75-78.
[n] M. G. Mazarakis, L. F. Bennett, W. R. Olson, J. W. Poukey, D. L. Smith, and B. N. Turman, “Electron Diodes and Cavity Design for the New 4-MeV Injector of the Recirculating Linear Accelerator (RLA)”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH409, pp. 605-607.
[n] H. O. C. Duarte, S. R. Marques, and L. Sanfelici, “Design and Impedance Optimization of the SIRIUS BPM Button”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC07, pp. 365-368.
[n] J. L. Munoz, I. Bustinduy, I. Rueda, and D. de Cos, “Design and Fabrication of ESS-Bilbao RFQ Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2373-2375. doi:10.18429/JACoW-IPAC2017-TUPVA120
[n] R. K. Rajawat, S. V. Desai, M. R. Kulkarni, D. Rani, K. V. Nagesh, and R. C. Sethi, “Electromagnetic Forming - A Technique with Potential Applications in Accelerators”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99906, pp. XX-XX.
[n] M. J. Johnson et al., “Cryomodule Design for a Superconducting Linac with Quarter-Wave, Half-Wave, and Focusing Elements”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT096, pp. 4317-4319.
[n] S. S. Cha, Y. Kim, B. C. Lee, B. N. Lee, H. D. Park, and K. B. Song, “Advanced Automatic Frequency Control System for a Dual Energy S-band RF Electron Linear Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2459-2461. doi:10.18429/JACoW-IPAC2014-WEPME077
[n] C. M. Lyneis, “Status of ECR Source Technology”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 254-259.
[n] M. Liu and C. X. Yin, “Development of Compact Ionization Chambers for Particle Therapy Facilities”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 100-102. doi:10.18429/JACoW-IBIC2019-MOPP012
[n] L. G. Lewis, “The Structure and Use of a Computer Control System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 338-340.
[n] D. Schirmer et al., “Status of the Synchrotron Light Source DELTA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF017, pp. 2296-2298.
[n] A. Lumpkin, B. Yang, Y. Chung, R. Dejus, G. Voykov, and G. Dattoli, “Preliminary Calculations on the Determination of APS Particle-Beam Parameters Based on Undulator Radiation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC03, pp. 2598-2600.
[n] S. A. Gavrilov and A. Feschenko, “Design and Development of Bunch Shape Monitor for FRIB MSU”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 179-181. doi:10.18429/JACoW-IBIC2017-TUPCC13
[n] A. V. Edwards et al., “Connection of 12 GHz High Power RF from the XBOX 1 High Gradient Test Stand to the CLEAR Electron LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2960-2963. doi:10.18429/JACoW-IPAC2019-WEPRB063
[n] M. I. Radaideh et al., “Progress on Machine Learning for the SNS High Voltage Converter Modulators”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 715-718. doi:10.18429/JACoW-NAPAC2022-WEPA38
[n] J. Bigolas, S. Getka, S. Kulinski, J. Olszewski, M. Pachan, and E. Plawski, “Practical Solution of High Gradient Accelerating Structure for Low Energy Medical Linear Accelerator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A18, pp. 2518-2520.
[n] R. F. Koontz and R. H. Miller, “Nanosecond Electron Beam Generation and Instrumentation at SLAC”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1350-1354.
[n] M. Filtz and H. Henke, “Time Domain Radiation of a Gaussian Charge Sheet Passing a Slit in a Conducting Screen”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH111, pp. 2173-2175.
[n] Y. S. Qiao, G. Lei, and Z. Zhao, “The Study of Accelerator Data Archiving and Retrieving Software”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4007-4009. doi:10.18429/JACoW-IPAC2017-THPAB121
[n] R. M. Caliari, L. M. P. Rodrigues, C. H. Tho, and H. G. P. de Oliveira, “Multipurpose Vacuum Chamber - Automation, Interlock-System and Self-Operating Vacuum Routines”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 41-44. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO20
[n] F. G. G. Garcia and W. Pellico, “Current and Planned High Proton Flux Operations at the FNAL Booster”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3A04, pp. 378-380.
[n] S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Development of a Beam Induced Fluorescence Monitor for Non-Destructively Profiling MW Proton Beam at the J-PARC Neutrino Beamline”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 358-362. doi:10.18429/JACoW-IBIC2019-TUPP024
[n] A. Anikeichik et al., “Injectors for High-Intensity Linear Accelerator of INR Moscow Meson Factory”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-54, pp. 660-662.
[n] R. Costa, A. Latina, and M. Olvegaard, “Coupling between transverse and longitudinal beam dynamics in the first-stage CLIC decelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 784-787. doi:10.18429/JACoW-IPAC2023-MOPL097
[n] A. Carne, C. W. Planner, J. Ranft, T. R. Walsh, N. D. West, and H. Wroe, “Some Results of Studies of Proton Beam Production and Transport for PLANIM”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 148-150.
[n] L. Shpani, C. Wang, H. Lew-Kiedrowska, M. Liepe, S. Sibener, and V. Do, “Advancements in Nb_3Sn growth for SRF technology”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 84-86. doi:10.18429/JACoW-LINAC2024-MOPB023
[n] B. Bernstein and I. Smith, “Aurora, an Electron Accelerator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 294-301.
For LaTeX
Use Complete Form
For BibTeX
References
- S. A. Gavrilov, A. Feschenko, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Beam Cross Section Monitor for INR Linac”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP085, pp. 605-607.
- A. DeSimone et al., “Design study for a transverse deflecting cavity based de-chirper”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM015, this conference.
- P. Huelsmann, H.-W. Glock, H. Klein, and M. Kurz, “Determination of Field Strength and Quality Factor of Heavily HOM Damped Accelerator Cavities”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1307-1310.
- J. Kamiya et al., “Improvements of Vacuum System in J-PARC 3 GeV Synchrotron”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3408-3411.
- J. G. M. Kleeven et al., “The IBA Superconducting Synchrocyclotron Project S2C2”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MO4PB02, pp. 115-119.
- H. Braun, K. Huebner, and W. Joho, “Decay Rates and Average Luminosity in a B-Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 141-144.
- Z. Zhao, S. Liu, and C. H. Wang, “BEPCII EPICS Data Archiving and Retrieving System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP002, pp. 411-413.
- Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454.
- J. M. Potter, “A Resonantly Coupled, Waveguide RF Power Manifold for Linear Accelerators”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper F10, pp. 362-362.
- H. Kaji et al., “New Event Timing System for Damping Ring at SuperKEKB”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 629-632.
- D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS38, pp. 2775-2778.
- M. Vadrucci et al., “Diagnostics Methods for the Medium Energy Proton Beam Extracted by the TOP IMPLART Linear Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4673-4675.
- Q. Qin et al., “Overview of ESRF-EBS's four-year operation and strategy for further upgrade”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS052, this conference.
- J. Cai et al., “High Level Software for 4.8 Ghz LHC Schottky System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP218, pp. 507-509.
- R. L. Warnock, “Coherent Synchrotron Radiation and Space Charge for a 1-D Bunch on an Arbitrary Planar Orbit”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS083, pp. 4255-4257.
- I. Hwang et al., “Coupling Diagnostics and Control at PLS Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE011, pp. 4533-4535.
- E. Bozoki, A. Friedman, and S. Ramamoorthy, “First Results with a Nonlinear Digital Orbit Feedback System at the NSLS”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ14, pp. 2696-2698.
- L. K. Mestha and C. W. Planner, “Application of System Identification Techniques to an RF Cavity Tuning Loop”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 982-985.
- A. Denker et al., “Status of the HZB Cyclotron”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 253-255.
- D. M. Zhou and K. Ohmi, “Interference of CSR Fields in a Curved Waveguide”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS007, pp. 604-606.
- J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
- C. Mitsuda, T. Honiden, K. Kobayashi, T. Kobayashi, S. Sasaki, and N. Sekine, “Solid-state Compact Kicker Pulsar using Strip-line Type Blumlein with SIC-MOSFET in Spring-8”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3585-3587.
- J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
- A. A. Pryanichnikov, M. A. Belikhin, A. P. Chernyaev, V. Rykalin, A. E. Shemyakov, and P. B. Zhogolev, “Development of the Low Intensity Extraction Beam Control System at Protom Synchrotron for Proton Radiography Implementation”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 439-442.
- F. Roncarolo, C. Carli, M. Chanel, L. D. Dumas, and R. Scrivens, “Design and Validation with Measurements of the LEIR Injection Line”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH046, pp. 2020-2022.
- J. Rose, R. Biscardi, W. Broome, R. D, J. Keane, and J. M. Wang, “Diagnosis and Cure of a Transverse Instability in the NSLS VUV Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1794-1797.
- H. A. Day, M. J. Barnes, F. Caspers, E. M?®tral, B. Salvant, and R. M. Jones, “Evaluation of the Beam Coupling Impedance of New beam Screen Designs for the LHC Injection Kicker Magnets”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME033, pp. 1649-1651.
- H. Nesemann, W. Brefeld, F. Brinker, W. Decking, O. Kaul, and B. Sarau, “DORIS III as a Dedicated Source for Synchrotron Radiation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA02, pp. 195-197.
- J. S. Chai et al., “Operation Experiences of MC50 Cyclotron, KIRAMS”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10006, pp. XX-XX.
- W. Schnell, “Report on the ISR”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1358-1363.
- K. Kranz, K. Desch, D. Elsner, and M. T. Switka, “Studies for a Laser Wakefield Driven Injector at ELSA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2686-2688.
- L. Calabretta, A. Calanna, D. Campo, M. M. Maggiore, L. A. C. Piazza, and F. Meot, “A Superconducting Ring Cyclotron for the DAEALUS Experiment”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD026, pp. 421-423.
- S. A. Nikitin et al., “Development of Resonance Depolarization Method at VEPP-4 for High Precision Measurement of Tau Lepton Mass”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH041, pp. 3317-3319.
- N. R. Stevenson and W. Z. Gelbart, “External High Current Targetry for Radioisotope Production”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IV-11, pp. 196-197.
- A. Akiyama et al., “KEKB Control System: The Present and the Future”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WECL3, pp. 343-345.
- K. Fukami et al., “Resonance Frequency Feedback System for a Precise Magnet Alignment using Multi-vibrating Wires”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 277-279.
- J. Allinger, G. Danby, J. Jackson, and A. Prodell, “Ultra Stable High Field Superconducting Dipoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1323-1325.
- A. Ponton et al., “ESS Normal Conducting Linac Status and Plans”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP044, pp. 948-950.
- K. Seiya et al., “Estimation of the required current on the anode power supply for high power operation in the J-PARC Main Ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS132, this conference.
- J. M. Koch, E. Plouviez, and F. Uberto, “A Fast Global Feedback System to Correct the Beam Position Deviation in the ESRF Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP26G, pp. 1729-1731.
- D. Raparia, M. Okamura, T. Kanesue, K. Ishibashi, and Y. Yonemura, “Design Study of a DPIS Injector for a Heavy Ion FFAG”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP045, pp. 172-174.
- M. Pont et al., “Power Converters for ALBA Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD067, pp. 3254-3256.
- D. Paulic et al., “Challenges for personnel safety systems during commissioning of ESS normal conducting linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA048, pp. 4063-4066.
- W. Busse and C. Rethfeldt, “The ISL-Control-System Upgrade: A Move from an In-House Implementation to a Commercial Control-System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU213, pp. XX-XX.
- G. Shvets, N. J. Fisch, A. Pukhov, and J. Meyer-ter-Vehn, “Generation of Phase-Controlled Accelerating Structures in Plasma”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA126, pp. 3675-3677.
- K. H. Yoo, M. Chung, and H. J. Son, “Studies of Buffer Gas Cooling of Ion Beams in an RFQ Cooler and Their Transport to the EBIS Charge Breeder”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 248-250.
- R. Miracoli et al., “A Microwave Ion Source for Pulsed Proton Beam Production at ESS-Bilbao”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH018, pp. 75-78.
- M. G. Mazarakis, L. F. Bennett, W. R. Olson, J. W. Poukey, D. L. Smith, and B. N. Turman, “Electron Diodes and Cavity Design for the New 4-MeV Injector of the Recirculating Linear Accelerator (RLA)”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH409, pp. 605-607.
- H. O. C. Duarte, S. R. Marques, and L. Sanfelici, “Design and Impedance Optimization of the SIRIUS BPM Button”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC07, pp. 365-368.
- J. L. Munoz, I. Bustinduy, I. Rueda, and D. de Cos, “Design and Fabrication of ESS-Bilbao RFQ Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2373-2375.
- R. K. Rajawat, S. V. Desai, M. R. Kulkarni, D. Rani, K. V. Nagesh, and R. C. Sethi, “Electromagnetic Forming - A Technique with Potential Applications in Accelerators”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99906, pp. XX-XX.
- M. J. Johnson et al., “Cryomodule Design for a Superconducting Linac with Quarter-Wave, Half-Wave, and Focusing Elements”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT096, pp. 4317-4319.
- S. S. Cha, Y. Kim, B. C. Lee, B. N. Lee, H. D. Park, and K. B. Song, “Advanced Automatic Frequency Control System for a Dual Energy S-band RF Electron Linear Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2459-2461.
- C. M. Lyneis, “Status of ECR Source Technology”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 254-259.
- M. Liu and C. X. Yin, “Development of Compact Ionization Chambers for Particle Therapy Facilities”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 100-102.
- L. G. Lewis, “The Structure and Use of a Computer Control System”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 338-340.
- D. Schirmer et al., “Status of the Synchrotron Light Source DELTA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF017, pp. 2296-2298.
- A. Lumpkin, B. Yang, Y. Chung, R. Dejus, G. Voykov, and G. Dattoli, “Preliminary Calculations on the Determination of APS Particle-Beam Parameters Based on Undulator Radiation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC03, pp. 2598-2600.
- S. A. Gavrilov and A. Feschenko, “Design and Development of Bunch Shape Monitor for FRIB MSU”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 179-181.
- A. V. Edwards et al., “Connection of 12 GHz High Power RF from the XBOX 1 High Gradient Test Stand to the CLEAR Electron LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2960-2963.
- M. I. Radaideh et al., “Progress on Machine Learning for the SNS High Voltage Converter Modulators”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 715-718.
- J. Bigolas, S. Getka, S. Kulinski, J. Olszewski, M. Pachan, and E. Plawski, “Practical Solution of High Gradient Accelerating Structure for Low Energy Medical Linear Accelerator”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A18, pp. 2518-2520.
- R. F. Koontz and R. H. Miller, “Nanosecond Electron Beam Generation and Instrumentation at SLAC”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1350-1354.
- M. Filtz and H. Henke, “Time Domain Radiation of a Gaussian Charge Sheet Passing a Slit in a Conducting Screen”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH111, pp. 2173-2175.
- Y. S. Qiao, G. Lei, and Z. Zhao, “The Study of Accelerator Data Archiving and Retrieving Software”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4007-4009.
- R. M. Caliari, L. M. P. Rodrigues, C. H. Tho, and H. G. P. de Oliveira, “Multipurpose Vacuum Chamber - Automation, Interlock-System and Self-Operating Vacuum Routines”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 41-44.
- F. G. G. Garcia and W. Pellico, “Current and Planned High Proton Flux Operations at the FNAL Booster”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3A04, pp. 378-380.
- S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Development of a Beam Induced Fluorescence Monitor for Non-Destructively Profiling MW Proton Beam at the J-PARC Neutrino Beamline”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 358-362.
- A. Anikeichik et al., “Injectors for High-Intensity Linear Accelerator of INR Moscow Meson Factory”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-54, pp. 660-662.
- R. Costa, A. Latina, and M. Olvegaard, “Coupling between transverse and longitudinal beam dynamics in the first-stage CLIC decelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL097, pp. 784-787.
- A. Carne, C. W. Planner, J. Ranft, T. R. Walsh, N. D. West, and H. Wroe, “Some Results of Studies of Proton Beam Production and Transport for PLANIM”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 148-150.
- L. Shpani, C. Wang, H. Lew-Kiedrowska, M. Liepe, S. Sibener, and V. Do, “Advancements in Nb_3Sn growth for SRF technology”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 84-86.
- B. Bernstein and I. Smith, “Aurora, an Electron Accelerator”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 294-301.
Back to search