Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Q. Luo, G. Pei, and A. Zhang, “Optimization of Magnetic Field Parameters in AMD for Enhanced Positron Yield”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3625, unpublished.
[n] D. Novak et al., “High resolution current control from switched mode power supply”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 185-188. doi:10.18429/JACoW-HIAT2025-TUP25
[n] M. Parise, J. Bernardini, and D. Passarelli, “Niobium to Titanium Electron Beam Welding for SRF Cavities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 515-518. doi:10.18429/JACoW-LINAC2022-TUPOGE13
[n] T. Juerges, J. J. D. Mol, and T. Snijder, “LOFAR2.0: Station Control Upgrade”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 31-36. doi:10.18429/JACoW-ICALEPCS2021-MOAR03
[n] W. Meng, J. W. Jackson, G. T. Danby, and C. Spataro, “Comparison of Computer Predictions and Magnetic Field Measurements for an Iron Spectrometer Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2883-2886.
[n] J. Calmels, V. Gerligand, M. Noir, V. Rude, M. Sosin, and L. Watrelot, “Design and validation of a micrometric and adaptable calibration bench for frequency scanning interferometry sensors”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2988-2991. doi:10.18429/JACoW-IPAC2025-THPS017
[n] M. Qian et al., “Design, fabrication and measurements of a quadrupole wiggler prototype”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1506-1509. doi:10.18429/JACoW-IPAC2024-TUPR42
[n] J. S. Eldred, “Accelerator Challenges in the Fermilab Neutrino Program”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper MOA3I2, unpublished.
[n] M. A. Fazio et al., “Towards a Data Science Enabled MeV Ultrafast Electron Diffraction System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 906-908. doi:10.18429/JACoW-IPAC2021-MOPAB286
[n] A. Chmielinska et al., “The first fully automated analysis of the Hardware Commissioning tests for superconducting circuits at the LHC”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7082, unpublished.
[n] L. Zytniak, K. Fugiel, K. Klimczyk, S. Kupiecki, and T. Madej, “AI-driven device driver generator”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1176-1180. doi:10.18429/JACoW-ICALEPCS2025-WEPD060
[n] G. D. Toby, C. N. Barbier, Y. W. Kang, S. W. Lee, J. S. Moss, and A. H. Narayan, “Design Enhancements for the SNS RFQ Coaxial Coupler”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 469-472. doi:10.18429/JACoW-LINAC2022-TUPOPA29
[n] W. Merz, R. Flood, E. J. Martin, and M. O'Sullivan, “Early Operating and Reliability Experience with the CEBAF DC Magnet Power Supplies”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP13, pp. 1991-1993.
[n] C. Montag et al., “eRHIC Design Update”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 18-21. doi:10.18429/JACoW-NAPAC2019-MOYBA4
[n] M. Noll et al., “Towards fiber optics-guided synchrotron radiation-based longitudinal beam diagnostics at the KARA booster synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4768-4771. doi:10.18429/JACoW-IPAC2023-THPL126
[n] G. Martino, T. Hellert, S. Leemann, and A. Sulc, “Hybrid online optimization for hands-off tuning of the ALS injector”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6330, unpublished.
[n] J. Wei, “Evolution of Hadron Beams Under Intrabeam Scattering”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3651-3654.
[n] D. Marx et al., “Dynamic Aperture Optimization in the EIC Electron Storage Ring with Two Interaction Points”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1984-1987. doi:10.18429/JACoW-IPAC2021-TUPAB235
[n] M. S. Champion et al., “Progress on the Proton Power Upgrade Project at the Spallation Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 390-393. doi:10.18429/JACoW-LINAC2022-TUPOJO19
[n] M. Ishii, M. T. Takeuchi, C. Kondo, and T. Fukui, “A Control System Using EtherCAT Technology for The Next-Generation Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1259. doi:10.18429/JACoW-ICALEPCS2019-WEPHA068
[n] S. Wagner, K. Kümpel, and H. Podlech, “Automated RF-conditioning utilizing machine learning”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 829-831. doi:10.18429/JACoW-IPAC2023-MOPL119
[n] R. Quispe-Abad et al., “Thermal-hydraulic analysis of a 20 kW beam power water-cooled mini-channel beam dump at Facility for Rare Isotope Beam”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 38-41. doi:10.18429/JACoW-HIAT2025-MOP05
[n] T. Higuchi, Co. Ltd, K. Saito, Y. Yamazaki, T. Ikeda, and S. Ohgushi, “Hydrogen Q-disease and Electropolishing”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR021, pp. XX-XX.
[n] J. Pivarc and A. Tikhomirov, “Some Remarks to One Self - Neutralization Model of Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH103, pp. 1909-1911.
[n] A. H. Lumpkin et al., “Observations on Submicropulse Electron-Beam Effects From Short-Range Wakefields in Tesla-Type Superconducting Rf Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2105-2108. doi:10.18429/JACoW-IPAC2021-TUPAB273
[n] R. Apsimon, K. A. Dewhurst, S. Setiniyaz, R. Seviour, D. A. Turner, and W. R. Wise, “RELIEF: Tanning of Leather with e-beam”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 645-649. doi:10.18429/JACoW-LINAC2022-WE2AA02
[n] G. D. Toby, Y. W. Kang, S.-H. Kim, S. W. Lee, and J. S. Moss, “SNS Warm Linac Circulator Breakdown Considerations for the PPU Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1041-1043. doi:10.18429/JACoW-IPAC2021-MOPAB335
[n] W. R. Smythe, “A Four Gap Synchrotron RF Cavity”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3517-3518.
[n] Y. Yamamoto et al., “Specification, design, and production schedule of cryomodule for SRF 5-year plan at KEK”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS142, unpublished.
[n] F. Rouse et al., “General, Database-Driven Fast-Feedback System for the Stanford Linear Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1419-1422.
[n] J. P. Scalão Martins et al., “The ESS Synchronous Data Service (SDS) development and first results”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper TUPD106, unpublished.
[n] E. Schneidmiller and M. V. Yurkov, “Baseline Parameters of the European XFEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 109-112. doi:10.18429/JACoW-FEL2017-MOP033
For LaTeX
Use Complete Form
For BibTeX
References
- Q. Luo, G. Pei, and A. Zhang, “Optimization of Magnetic Field Parameters in AMD for Enhanced Positron Yield”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3625, this conference.
- D. Novak et al., “High resolution current control from switched mode power supply”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUP25, pp. 185-188.
- M. Parise, J. Bernardini, and D. Passarelli, “Niobium to Titanium Electron Beam Welding for SRF Cavities”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 515-518.
- T. Juerges, J. J. D. Mol, and T. Snijder, “LOFAR2.0: Station Control Upgrade”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 31-36.
- W. Meng, J. W. Jackson, G. T. Danby, and C. Spataro, “Comparison of Computer Predictions and Magnetic Field Measurements for an Iron Spectrometer Magnet”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2883-2886.
- J. Calmels, V. Gerligand, M. Noir, V. Rude, M. Sosin, and L. Watrelot, “Design and validation of a micrometric and adaptable calibration bench for frequency scanning interferometry sensors”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS017, pp. 2988-2991.
- M. Qian et al., “Design, fabrication and measurements of a quadrupole wiggler prototype”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR42, pp. 1506-1509.
- J. S. Eldred, “Accelerator Challenges in the Fermilab Neutrino Program”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper MOA3I2, unpublished.
- M. A. Fazio et al., “Towards a Data Science Enabled MeV Ultrafast Electron Diffraction System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 906-908.
- A. Chmielinska et al., “The first fully automated analysis of the Hardware Commissioning tests for superconducting circuits at the LHC”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7082, this conference.
- L. Zytniak, K. Fugiel, K. Klimczyk, S. Kupiecki, and T. Madej, “AI-driven device driver generator”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1176-1180.
- G. D. Toby, C. N. Barbier, Y. W. Kang, S. W. Lee, J. S. Moss, and A. H. Narayan, “Design Enhancements for the SNS RFQ Coaxial Coupler”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 469-472.
- W. Merz, R. Flood, E. J. Martin, and M. O'Sullivan, “Early Operating and Reliability Experience with the CEBAF DC Magnet Power Supplies”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPP13, pp. 1991-1993.
- C. Montag et al., “eRHIC Design Update”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 18-21.
- M. Noll et al., “Towards fiber optics-guided synchrotron radiation-based longitudinal beam diagnostics at the KARA booster synchrotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL126, pp. 4768-4771.
- G. Martino, T. Hellert, S. Leemann, and A. Sulc, “Hybrid online optimization for hands-off tuning of the ALS injector”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6330, this conference.
- J. Wei, “Evolution of Hadron Beams Under Intrabeam Scattering”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3651-3654.
- D. Marx et al., “Dynamic Aperture Optimization in the EIC Electron Storage Ring with Two Interaction Points”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1984-1987.
- M. S. Champion et al., “Progress on the Proton Power Upgrade Project at the Spallation Neutron Source”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 390-393.
- M. Ishii, M. T. Takeuchi, C. Kondo, and T. Fukui, “A Control System Using EtherCAT Technology for The Next-Generation Accelerator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1259.
- S. Wagner, K. Kümpel, and H. Podlech, “Automated RF-conditioning utilizing machine learning”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL119, pp. 829-831.
- R. Quispe-Abad et al., “Thermal-hydraulic analysis of a 20 kW beam power water-cooled mini-channel beam dump at Facility for Rare Isotope Beam”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOP05, pp. 38-41.
- T. Higuchi, Co. Ltd, K. Saito, Y. Yamazaki, T. Ikeda, and S. Ohgushi, “Hydrogen Q-disease and Electropolishing”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR021, pp. XX-XX.
- J. Pivarc and A. Tikhomirov, “Some Remarks to One Self - Neutralization Model of Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH103, pp. 1909-1911.
- A. H. Lumpkin et al., “Observations on Submicropulse Electron-Beam Effects From Short-Range Wakefields in Tesla-Type Superconducting Rf Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2105-2108.
- R. Apsimon, K. A. Dewhurst, S. Setiniyaz, R. Seviour, D. A. Turner, and W. R. Wise, “RELIEF: Tanning of Leather with e-beam”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 645-649.
- G. D. Toby, Y. W. Kang, S.-H. Kim, S. W. Lee, and J. S. Moss, “SNS Warm Linac Circulator Breakdown Considerations for the PPU Project”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1041-1043.
- W. R. Smythe, “A Four Gap Synchrotron RF Cavity”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3517-3518.
- Y. Yamamoto et al., “Specification, design, and production schedule of cryomodule for SRF 5-year plan at KEK”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS142, unpublished.
- F. Rouse et al., “General, Database-Driven Fast-Feedback System for the Stanford Linear Collider”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1419-1422.
- J. P. Scalão Martins et al., “The ESS Synchronous Data Service (SDS) development and first results”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper TUPD106, unpublished.
- E. Schneidmiller and M. V. Yurkov, “Baseline Parameters of the European XFEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 109-112.
Back to search