JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Jung, H. J. Kim, H. H. Lee, and H. C. Yang, “Analysis of BCP Characteristics for SRF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2549-2551. doi:10.18429/JACoW-IPAC2014-WEPRI034
[n]	T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Measurements of the Beam Break-Up Threshold Current at the Recirculating Electron Accelerator S-DALINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 751-753. doi:10.18429/JACoW-LINAC2016-THOP04
[n]	D. Bafia et al., “Understanding and Pushing the Limits of Nitrogen Doping”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3078-3081. doi:10.18429/JACoW-IPAC2019-WEPRB114
[n]	G. Berger, T. Daras, M. Loiselet, N. Postiau, and G. Ryckewaert, “Acceleration and Mass-Separation of Radioactive Ion Beams in an Isochronous Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2610-2613. 
[n]	S. Pape Moeller and U. V. Pedersen, “Operational Experience with the Electrostatic Storage Ring, ELISA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP16, pp. 2295-2297. 
[n]	W. Guo and F. J. Willeke, “Emittance Reduction Approaches for NSLS-II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP129, pp. 2363-2365. 
[n]	A. Brauch, M. Arnold, J. Enders, L. E. Jürgensen, N. Pietralla, and S. Weih, “Bunch Length Measurement Systems at S-DALINAC”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 96-99. doi:10.18429/JACoW-IBIC2022-MOP26
[n]	P. M??ller et al., “Surface Preparation and Optimization of SC CH Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 71-73. doi:10.18429/JACoW-SRF2019-MOP019
[n]	F. Schlie?ƒmann, M. Arnold, M. Dutine, J. Pforr, N. Pietralla, and M. Steinhorst, “Beam Dynamics Simulations for the Twofold ERL Mode at the S-DALINAC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 155-158. doi:10.18429/JACoW-ERL2019-FRCOXBS03
[n]	D. B. Bazyl, H. De Gersem, J. Enders, W. F. O. M??ller, and S. Weih, “Design of a Multi-Cell SRF Reduced-Beta Cavity for the Acceleration of Low Energy Electron Beams”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 603-605. doi:10.18429/JACoW-FEL2019-THP008
[n]	R. R. Mitchell, B. A. Gardner, T. Ilg, M. Leitner, and B. A. Prichard, “Upgrades to the Injector Cathode and Supporting Structure of the DARHT Second Axis Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP078, pp. 554-556. 
[n]	T. Conrad et al., “Cavity Designs for the CH3 to CH11 of the Superconducting Heavy Ion Accelerator HELIAC”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 396-398. doi:10.18429/JACoW-SRF2019-TUP005
[n]	W. Waldron, R. J. Briggs, and L. R. Reginato, “High Voltage Operation of Helical Pulseline Structures for Ion Acceleration”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT029, pp. 2092-2094. 
[n]	T. Y. Song, Y. K. Kim, W. S. Park, Y. S. Cho, and B. H. Choi, “The Characteristics of Lead and Tungsten Targets Used in the Accelerator-Driven Subcritical Reactor”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D009, pp. 95-97. 
[n]	M. Schwarz, H. Bartosik, E. Chapochnikova, A. Lasheen, J. Repond, and H. Timko, “Studies of Capture and Flat-Bottom Losses in the SPS”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 180-185. doi:10.18429/JACoW-HB2018-TUP2WA03
[n]	T. Bahlo, M. Arnold, J. Pforr, N. Pietralla, and F. Schlie?ƒmann, “Time-of-Flight Measurements and Analysis of the Longitudinal Dispersion at the S-DALINAC”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 57-60. doi:10.18429/JACoW-IBIC2017-MOPCC08
[n]	J. Conrad, F. Hug, T. Kuerzeder, and N. Pietralla, “Improvement of the Run-time of 35 mbar Helium Gas Pumping Units for the Superconducting Linear Accelerator S-DALINAC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4019-4021. doi:10.18429/JACoW-IPAC2014-THPRI103
[n]	W. Wittmer et al., “Online Modeling of the Rare Isotope Reaccelerator - ReA3”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3195-3197. doi:10.18429/JACoW-IPAC2014-THPRO129
[n]	D. Leitner, J. Y. Benitez, T. J. Loew, C. M. Lyneis And D, and S. Todd, “Progress And Perspective For High Frequency, High Performance Superconducting Ecr Ion Sources”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 265-270. 
[n]	L. E. Juergensen et al., “Installation of a Beam Loss Monitoring System at the S-DALINAC”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD24, pp. 468-470. 
[n]	K. N. Leung, Y. Lee, A. Mashaw, D. Wutte, and R. A. Gough, “TiN Coating of Accelerator Beamline Chambers”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P055, pp. 3737-3739. 
[n]	R. W. Garnett, “The Los Alamos Multi-Probe Facility for Matter-Radiation Interactions in Extremes”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 729-733. doi:10.18429/JACoW-LINAC2016-TH3A02
[n]	G. Ulm, F. Bellorini, D. P. Brodrick, R. N. Fernandes, N. Levchenko, and D. P. Piso, “PLC Factory: Automating Routine Tasks in Large-Scale PLC Software Development”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 495-500. doi:10.18429/JACoW-ICALEPCS2017-TUPHA046
[n]	V. H. Ranjbar, H. J. Kim, T. Sen, A. V. Sobol, and C.-Y. Tan, “BTF Simulations for Tevatron and RHIC with Resistive Wall Wake Field”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP093, pp. 4755-4757. 
[n]	W. Waldron, S. Eylon, W. Greenway, E. Henestroza, and S. S. Yu, “Electrical Breakdown Studies with Mycalex Insulators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE040, pp. 1171-1173. 
[n]	A. Jakob, C. Gabor, H. Klein, O. Meusel, J. Pozimski, and U. Ratzinger, “H- - LEBT at Frankfurt”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI060, pp. 1906-1908. 
[n]	S. Brandenburg et al., “The RF System of the Superconducting Cyclotron AGOR”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-01, pp. 197-200. 
[n]	R. Heese et al., “NSLS-II Pulsed Magnet Design Considerations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP009, pp. 1105-1107. 
[n]	T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1714-1716. doi:10.18429/JACoW-IPAC2016-TUPOR025
[n]	W. P. Jones and G. P. A. Berg, “Design of a Beam Transport System for a Proton Radiation Therapy Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP115, pp. 2519-2521. 
[n]	T. Kuerzeder et al., “Investigations on Transverse Beam Break Up Using a Recirculated Electron Beam”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 30-33. doi:10.18429/JACoW-ERL2015-TUICLH2032
[n]	J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527. 
[n]	A. Lasheen, T. Argyropoulos, J. Repond, and E. N. Shaposhnikova, “Effect of the Various Impedances on Longitudinal Beam Stability in the CERN SPS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1666-1669. doi:10.18429/JACoW-IPAC2016-TUPOR008
[n]	M. Arnold, T. Kuerzeder, J. Pforr, N. Pietralla, M. Steinhorst, and F. Hug, “Construction of a Third Recirculation for the S-DALINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 168-170. doi:10.18429/JACoW-LINAC2016-MOPLR014
[n]	S. Lauber et al., “Reconstruction of the Longitudinal Phase Space for the Superconducting CW HELIAC”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1173-1177. doi:10.18429/JACoW-SRF2019-THP103
[n]	Y. Lee et al., “Multicusp Ion Source for Ion Projection Lithography”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP144, pp. 2575-2577. 
[n]	J. M. Verbeke et al., “Neutron Tube Design Study for Boron Neutron Capture Therapy Application”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP123, pp. 2540-2542. 
[n]	B. Durickovic et al., “RF Cavity Phase Calibration using Electromagnetic Pickups”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO14, pp. 1334-1336. 
[n]	G. I. Bell, I. Ben-Zvi, D. L. Bruhwiler, Y. S. Derbenev, V. Litvinenko, and A. V. Sobol, “VORPAL Simulations Relevant to Coherent Electron Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC085, pp. 3185-3187. 
[n]	M. Arnold et al., “Once Recirculating Energy Recovery Linac Operation of S-DALINAC”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 710-713. doi:10.18429/JACoW-LINAC2018-THPO012
[n]	E. N. Shaposhnikova, T. Argyropoulos, T. Bohl, A. Lasheen, J. Repond, and H. Timko, “Identification and Reduction of the CERN SPS Impedance”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 260-265. doi:10.18429/JACoW-HB2016-TUAM3X01
[n]	A. D. Palczewski, G. V. Eremeev, R. L. Geng, I. Jelezov, W. Singer, and X. Singer, “Quench Studies and Preheating Analysis of Seamless Hydroformed Cavities Processed at Jefferson Laboratories”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP063, pp. 575-578. 
[n]	D. Kuchler, A. I. Michet, J. A. F. Somoza, and V. Toivanen, “Never Run Your ECR Ion Source with Argon in Afterglow for 6 Months!”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 89-91. doi:10.18429/JACoW-ECRIS2016-WEPP03
[n]	M. Arnold et al., “ERL Mode of S-DALINAC: Design and Status”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 40-44. doi:10.18429/JACoW-ERL2017-MOIDCC006
[n]	T. Kaltenbacher, J. Repond, and C. Vollinger, “Characterization of Resonant Impedances of CERN-SPS Gate Valves”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3139-3142. doi:10.18429/JACoW-IPAC2017-WEPIK089
[n]	U. Krause, K. H?Âppner, and S. Matthies, “Access Control in the Renovated GSI Control System: A Combined Name- and Rights-Server”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP017, pp. 119-121. 
[n]	U. Krause et al., “Integration of Renovated Networking Middleware into a Running Control System Environment”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW03, pp. 37-39. 
[n]	S. Yu. Taskaev et al., “Vacuum-insulation Tandem Accelerator for Boron Neutron Capture Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS079, pp. 3615-3617. 
[n]	M. Loiselet, N. Postiau, and G. Ryckewaert, “Status Report of Cyclone”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-16, pp. 82-85. 
[n]	S. Casalbuoni, M. Hagelstein, D. Saez de Jauregui, and S. Schleede, “Electron Multipacting Can Explain the Pressure Rise in the ANKA Cold Bore Superconducting Undulator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP069, pp. 2420-2422. 
[n]	D. Shuman, E. Henestroza, G. Ritchie, D. L. Vanecek, W. Waldron, and S. Yu, “A Pulsed Solenoid for Intense Ion Beam Transport”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT069, pp. 3798-3800. 
[n]	A. Pettersson, D. P. Brodrick, T. Brys, and M. A. Hartl, “Integration of Sample Environment Systems at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 741-744. doi:10.18429/JACoW-ICALEPCS2017-TUPHA141
[n]	H. H. Lee et al., “A Simulation for the Optimization of Bremsstrahlung Radiation for Nuclear Applications Using Laser Accelerated Electron Beam”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPB13, pp. 618-621. 
[n]	Y. S. Cho, H. H. Lee, B. H. Choi, K. Y. Seo, H. J. Kweon, and J. M. Han, “3.0 MeV KTF RFQ LINAC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP004, pp. XX-XX. 
[n]	M. Barbosa Alves, A. Andersson, F. Cullinan, and P. Tavares, “Bunch lengthening with double- and triple-rf systems for MAX4U”, presented at the IPAC'26, Deauville, France, May 2026, paper WEV5002, unpublished. 
[n]	B. S. Han, W. G. Kang, S. M. Kim, N. K. Kuksanov, and R. A. Salimov, “High Voltage ELV Accelerators for Industrial Application (Family of Accelerators and Tendency of Development)”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRBCH03, pp. 227-229. 
[n]	A. He, F. J. Willeke, and L.-H. Yu, “Status of Electron Beam Slicing Project at NSLS-II, BNL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP054, pp. 496-500. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search