JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	P. Morales Sanchez et al., “Smartcell X-band normal conducting accelerator structure prototype fabrication”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 666-669. doi:10.18429/JACoW-LINAC2024-THPB016
[n]	B. Bradu, K. Brodzinski, G. Ferlin, and V. Gahier, “LHC low beta quadrupole magnets: cryogenic refrigeration capacity and improved controls for luminosity optimization”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3791-3793. doi:10.18429/JACoW-IPAC2023-WEPM094
[n]	N. V. Lazarev and S. Skachkov, “Tipless Permanent Magnet Quadrupole Lenses”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S7-2, pp. 380-383. 
[n]	G. Vandoni et al., “An SRF Test Stand in High Intensity and High Energy Proton Beams”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1187-1191. doi:10.18429/JACoW-SRF2019-THP106
[n]	C. Zannini et al., “Beam-induced heating mitigation of the SPS kickers: a crucial upgrade to move towards HL-LHC beam intensities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3486-3489. doi:10.18429/JACoW-IPAC2023-WEPL157
[n]	I. M. Kapchinskij and N. V. Lazarev, “Invited Paper-The Linear Accelerator Structures with Space-Uniform Quadrupole Focusing”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3462-3469. 
[n]	D. Howard et al., “Bevalac Injector Final Stage RF Amplifier Upgrades”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 742-745. 
[n]	A. D. Palczewski, F. Marhauser, A. Grassellino, and S. Posen, “Material Qualification of LCLS-II Production Niobium Material Including RF and Flux Expulsion Measurements on Single Cell Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 199-202. doi:10.18429/JACoW-LINAC2016-MOPLR026
[n]	S. A. Kondrashev, J.-W. Kim, Y. H. Park, and H. J. Son, “Advanced EBIS Charge Breeder for Rare Isotope Science Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1304-1307. doi:10.18429/JACoW-IPAC2016-TUPMR029
[n]	A. Navitski, A. Prudnikava, and Y. Tamashevich, “Progress of R&D on SRF Cavities at DESY towards the ILC Performance Goal”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2499-2501. doi:10.18429/JACoW-IPAC2014-WEPRI011
[n]	G. V. Eremeev, K. Macha, U. Pudasaini, C. E. Reece, and A-M. Valente-Feliciano, “Progress Towards Nb3Sn CEBAF Injector Cryomodule”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 193-195. doi:10.18429/JACoW-LINAC2016-MOPLR024
[n]	O. O. Andreassen and A. Tarasenko, “Continuous Integration Using LabVIEW, SVN and Hudson”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB08, pp. 74-76. 
[n]	K. Endo, K. Egawa, Z. Fang, M. Mizobata, and A. Teramoto, “Development of High Field Dipole and High Current Pulse Power Supply for Compact Proton Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG027, pp. 1071-1073. 
[n]	M. Garlasch?® et al., “Assembly of the DQW Crab Cavity Cryomodule for SPS Test”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2561-2564. doi:10.18429/JACoW-IPAC2018-WEPMF078
[n]	T. Hays et al., “Microscopic Examination and Elemental Analysis of Field Emission Sites in 5.8 GHz Superconducting Mushroom Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I23, pp. XX-XX. 
[n]	T. J. Jones et al., “Development of a Novel Supporting System for High Luminosity LHC SRF Crab Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 304-308. doi:10.18429/JACoW-SRF2017-MOPB104
[n]	B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “Control of the Bevatron/Bevalac Main Guide Field Power Supply for Fast Ion Switching Operation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1896-1899. 
[n]	A. Biocca et al., “The Advanced Light Source Accelerator Control System at Ten Years From Commissioning”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP008, pp. XX-XX. 
[n]	K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2541-2544. doi:10.18429/JACoW-IPAC2018-WEPMF073
[n]	A. Seryi et al., “ATF2 Commissioning”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1RAI03, pp. 4205-4209. 
[n]	B. Mustapha, P. N. Ostroumov, and A. Perry, “Progress and Design Studies for the ATLAS Multi-User Upgrade”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 610-612. doi:10.18429/JACoW-LINAC2016-TUPLR068
[n]	J. Holma, M. J. Barnes, and L. Ducimeti?¿re, “Measurements on Magnetic Cores for Inductive Adders with Ultra-Flat Output Pulses for CLIC DR Kickers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3619-3622. doi:10.18429/JACoW-IPAC2016-THPMW032
[n]	L. Bellan et al., “Source and LEBT Beam Preparation for IFMIF-EVEDA RFQ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 420-423. doi:10.18429/JACoW-LINAC2016-TUPRC005
[n]	B. C. Isherwood, G. Machicoane, G. Pozdeyev, and Y. Yamazaki, “Beam Instabilities in Electron Cyclotron Resonance Ion Sources”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 455-457. doi:10.18429/JACoW-LINAC2016-TUPRC019
[n]	V. V. Bukhal, A. A. Patapenka, A. A. Safronava, M. Artiushenko, K. V. Husak, and S. I. Tyutyunnikov, “Experimental Determination of Heavy Nuclei Fission Cross-sections under Relativistic Deuterons Irradiation on the Accelerator Complex ``Nuclotron'' for Purposes of Transmutation and Energy Amplification”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2221-2223. doi:10.18429/JACoW-IPAC2014-WEPRO109
[n]	A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127. 
[n]	A. M. Kozodaev et al., “Development and Construction of Experimental ADS at ITEP”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI110, pp. 2777-2779. 
[n]	A. Gallo, D. Alesini, F. Marcellini, P. Raimondi, and M. Zobov, “Preliminary Study of a Crab Crossing System for DAFNE”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS029, pp. 607-609. 
[n]	L. Groening et al., “Upgrade of the Universal Linear Accelerator UNILAC for FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 880-882. doi:10.18429/JACoW-IPAC2016-MOPOY017
[n]	I. A. Kvashonkin, I. S. Libman, I. I. Sulygin, and I. G. Umanskij, “RF Power Amplifier for the First Stage of the UNK”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1200-1204. 
[n]	P. B. Cheblakov et al., “NSLS-II Booster Ramp Handling”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC053, pp. 1189-1192. 
[n]	T. Endo et al., “Fast Betatron Tune Controller for Circulating Beam in a Synchrotron”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D032, pp. 468-470. 
[n]	P. V. Tyagi et al., “Surface Studies of Plasma Processed Nb Samples”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB115, pp. 438-442. 
[n]	A. Monera Martinez, R. Andersson, A. Nordt, M. Zaera-Sanz, and C. Hilbes, “Overview and Design Status of the Fast Beam Interlock System at ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 409-412. doi:10.18429/JACoW-ICALEPCS2015-MOPGF138
[n]	D. Alesini, A. Gallo, A. Ghigo, F. Marcellini, M. Serio, and M. Zobov, “HOM Damping in the DAFNE Injection Kickers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B06, pp. 1145-1147. 
[n]	V. Gubin, A. M. Barnyakov, S. L. Samoylov, and D. P. Sukhanov, “RF Cavity Based Charge Detector for a Low Charge Ultra Sort Singe Electron Bunch Measurement”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 423-425. doi:10.18429/JACoW-RuPAC2021-WEPSC42
[n]	G. M. Wang et al., “NSLS II Commissioning Tools”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO17, pp. 276-278. 
[n]	V. K. Plotnikov, “Engineering Design of ITEP Proton Linac for Nuclear Waste Transmutation”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP80, pp. 252-254. 
[n]	S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished. 
[n]	A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Surface Roughness and Correlated Enhanced Field Emission Investigations of Electropolished Niobium Samples”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO045, pp. 316-320. 
[n]	J. Holma and M. J. Barnes, “Evaluation of Components for the High Precision Inductive Adder for the CLIC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD076, pp. 3692-3694. 
[n]	A. A. Astapov, V. P. Bamblevski, and L. N. Zaitsev, “Induced Radioactivity of the Septum Magnet of the Beam Slow Extraction at the Nuclotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP052L, pp. 2624-2626. 
[n]	F. Bertinelli and R. Jung, “Design and Construction of LEP Collimators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1564-1567. 
[n]	V. K. Vorobjev, E. V. Klimenkov, V. M. Mokhov, and E. S. Nelipovich, “A Second Radio-Frequency Harmonic in the U-70 Booster”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1020-1023. 
[n]	M. El Khaldi et al., “The RF System of Thomx”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 551-553. doi:10.18429/JACoW-LINAC2016-TUPLR040
[n]	J. Holma and M. J. Barnes, “Preliminary Design of an Inductive Adder for CLIC Damping Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO032, pp. 3409-3411. 
[n]	K. Endo et al., “Compact Proton and Carbon Ion Synchrotrons for Radiation Therapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI087, pp. 2733-2735. 
[n]	V. S. Skachkov, “A Variable Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B17, pp. 2122-2124. 
[n]	G. Stover, R. Dwinell, J. Halliwell, and M. Nyman, “Operational Results for the Raster Scanning Power Supply System Constructed at the Bevalac Biomedical Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1890-1893. 
[n]	T. Miyajima, “Effect of Number of Macro Particles on Time Evolution of Phase Space Distribution”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 414-416. doi:10.18429/JACoW-LINAC2016-TUPRC003
[n]	A. Gallo et al., “DAFNE Broadband Impedance”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI025, pp. 1494-1496. 
[n]	B. Mustapha et al., “Alternative Design for the RISP Pre-Stripper Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 531-534. doi:10.18429/JACoW-LINAC2016-TUPLR028
[n]	E. A. Simonov, E. B. Levichev, and D. N. Shatilov, “Application of Frequency Map Analysis to Beam-Beam Effects Study in Crab Waist Collision Scheme”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE075, pp. 4692-4694. 
[n]	I. M. Kapchinskij, A. M. Kozodaev, N. V. Lazarev, and V. S. Skachkov, “Design and Development of Permanent Magnet Quadrupoles for Ion Linacs”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F07, pp. 350-351. 
[n]	M. El Khaldi and W. Kaabi, “Experimental Study of Multipactor Suppression in Dielectric Materials”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2753-2756. doi:10.18429/JACoW-IPAC2015-WEPMA007
[n]	D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3621-3623. doi:10.18429/JACoW-IPAC2017-WEPVA150
[n]	J. Holma, M. J. Barnes, and S. J. Ovaska, “Modelling of Parasitic Inductances of a High Precision Inductive Adder for CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA033, pp. 738-740. 
[n]	A. A. Derbenev et al., “Monitoring and Archiving of NSLS-II Booster Synchrotron Parameters”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC021, pp. 587-590. 
[n]	W. Leemans et al., “Laser Plasma Sources for High Brightness Beams: From THz to X-rays”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOA001, pp. XX-XX. 
[n]	Yu. I. Maltseva and V. G. Prisekin, “Optical Fiber Based Beam Loss Monitor for the BINP e-e+ Injection Complex”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 486-488. doi:10.18429/JACoW-RUPAC2018-THPSC38
[n]	D. Alesini, R. Corsini, A. Gallo, F. Marcellini, D. Schulte, and I. Syratchev, “Studies on the RF Deflectors for CTF3”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B09, pp. 465-467. 
[n]	D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 112-115. 
[n]	J. Y. Huang, S. H. Kim, S. H. Nam, and S. S. Park, “Klystron-Modulator System Performance for PLS 2-GeV Electron Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2B19, pp. 2367-2369. 
[n]	S. Boychenko et al., “Towards a Second Generation Data Analysis Framework for LHC Transient Data Recording”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 802-805. doi:10.18429/JACoW-ICALEPCS2015-WEPGF046
[n]	P. Michelato et al., “An X-Ray Fluorescence Probe for Defect Detection in Superconducting 1.3 GHz Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP110, pp. 736-738. 
[n]	H. Reymond, O. Ø. Andreassen, M. Charrondiere, C. Charrondière, and P. D. Jankowski, “Enhancing Measurement Quality in HL-LHC Magnets Testing Using Software Techniques on Digital Multimeter Cards-Based System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 729-734. doi:10.18429/JACoW-ICALEPCS2023-TUPDP087
[n]	J. Martinez-Darve, K. Artoos, P. Cruikshank, N. Kos, and C. Rathjen, “Measurement of the Mechanical Behaviour of the LHC Beam Screen During a Quench”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH035, pp. 2162-2164. 
[n]	D. Alesini et al., “Design Status of a High Harmonic RF System for DAFNE”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B15, pp. 1495-1497. 
[n]	J. Smedley et al., “QE Measurements of a Nb-Pb SRF Photoinjector”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 11, pp. 95-98. 
[n]	J. Y. Huang et al., “RHIC Injection Transport Beam Emittance Measurements”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF04, pp. 45-48. 
[n]	M. F. Blinov et al., “High Power Neutron Converter for Low Energy Proton/Deuteron Beams: Liquid Metal Driving System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC085, pp. 256-258. 
[n]	D. Khan and T. O. Raubenheimer, “LCLS-II Bunch Compressor Study: 5-Bend Chicane”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP027, pp. 755-762. 
[n]	A. Navitski et al., “ILC-HiGrade Cavities as a Tool of Quality Control for European XFEL”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP043, pp. 212-215. 
[n]	J. M. Lee, J. Y. Huang, and C. Kim, “Inverse Response Matrix Computation for the Storage Ring Slow Orbit Feedback Control: Synthesized Topological Inversion Computation”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA34, pp. 431-433. 
[n]	A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Simulation of Proton Beam Behaviour in High Energy Linac with Few-Gaps Resonators at Failure of One or Some of Them”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B02, pp. 830-832. 
[n]	S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213. 
[n]	D. A. Goldberg, G. R. Lambertson, L. Shalz, and F. Voelker, “Measurement of Frequency Response of LBL Stochastic Cooling Arrays for TeV-1 Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2168-2171. 
[n]	V. A. Koshelev et al., “Design of 4-vane RFQ with Magnetic Coupling Windows for Nuclotron Injector Lu-20”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 575-577. doi:10.18429/JACoW-LINAC2016-TUPLR050
[n]	K. Artoos et al., “Status of the HL-LHC Crab Cavity Tuner”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 646-651. doi:10.18429/JACoW-SRF2019-TUP081
[n]	N. Carmignani, W. De Nolf, A. Franchi, B. Nash, C. Sahle, and L. Torino, “Measurements of the Momentum Compaction Factor of the ESRF Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1392-1395. doi:10.18429/JACoW-IPAC2019-TUPGW006
[n]	A. D. Palczewski, B. Bullock, C. A. Cooper, S. C. Joshi, A. Navitski, and A. A. Rossi, “R&D Progress in SRF Surface Preparation With Centrifugal Barrel Polishing (CBP) for both Nb and Cu”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUIOB01, pp. 398-403. 
[n]	J. Gutekunst, F. Klumb, G. Kautzmann, H. M. Durand, and M. Sosin, “Continuous position estimation for the full remote alignment system of the High Luminosity LHC upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3337-3340. doi:10.18429/JACoW-IPAC2024-THPG36
[n]	M. Nagaenko and I. Pavletsov, “Simulation of Beam Optics and Beam-Degrader Interaction for COMBAS Fragment-Separator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1394-1397. 
[n]	A. A. Asseev, A. P. Elin, A. V. Kalajdov, S. N. Lapitskij, and A. V. Minchenko, “Non Resonant Slow Extraction of Protons from the IHEP Accelerator to the SWD Setup”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1486-1488. 
[n]	F. Daly, S. Fisher, R. Kurita, and J. Brian Langton, “Mechanical Design of the HER Synchrotron Light Monitor Primary Mirror for the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P050, pp. 2014-2016. 
[n]	W. A. Barth et al., “First Heavy Ion Beam Acceleration with a Superconducting Multi Gap CH-cavity”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 215-219. doi:10.18429/JACoW-HB2018-WEP1WB03
[n]	E. A. Levterova, A. A. Baldin, A. I. Berlev, I. A. Kryachko, M. Paraipan, and S. I. Tyutyunnikov, “TFBC Detectors Application for the Study of the Energy Spectrum of Neutrons Produced by Interaction of Uranium Target With the 1 - 8 GeV Incident Beams of Deutrons”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA30, unpublished. 
[n]	V. S. Skachkov, I. M. Kapchinskiy, N. V. Lazarev, and A. V. Selin, “Circular Permanent Magnet Quadrupoles for Higher Frequency and Higher Shunt Impedance Linacs”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1400-1403. 
[n]	A. Navitski et al., “R&D on Cavity Treatments at DESY Towards the ILC Performance Goal”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP053, pp. 240-243. 
[n]	F. E. Emanov, D. Bolkhovityanov, A. R. Frolov, and Ye. A. Gusev, “Extending VEPP-5 Control System by Middleware for Injection/extraction Automation”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC25, pp. 371-373. 
[n]	I. V. Chuvilo et al., “Proton 36 MeV, 0.5 mA Linac ISTRA-36 as a Driver Multipurpose Irradiation Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP078G, pp. 2674-2678. 
[n]	J. Holma, M. J. Barnes, and C. Belver-Aguilar, “Measurements on Prototype Inductive Adders with Ultra-flat-top Output Pulses for CLIC DR Kickers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 128-130. doi:10.18429/JACoW-IPAC2014-MOPRO028
[n]	A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Reliability Increase Ways for High-Power Linacs - ADS Drivers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B03, pp. 942-944. 
[n]	S. Boychenko, M. A. Galil?â, J. C. Garnier, M. Zerlauth, and M. Zenha-Rela, “Multi-Criteria Partitioning on Distributed File Systems for Efficient Accelerator Data Analysis and Performance Optimization”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1436-1441. doi:10.18429/JACoW-ICALEPCS2017-THPHA036
[n]	A. Navitski, K. Fl?Âttmann, S. Lederer, and G. Mueller, “Novel UHV Scanning Anode Field Emission Microscope (SAFEM) for Dark Current Investigations on Photocathodes”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO044, pp. 312-315. 
[n]	J. D. Mammosser et al., “Results From the Proton Power Upgrade Project Cavity Quality Assurance Plan”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 801. doi:10.18429/JACoW-SRF2021-THPCAV008
[n]	E. Minehara, P. Bilquist, W. Evans, F. Lynch, and R. Pardo, “Design of the ATLAS PIIECR Ion Source”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-06, pp. 725-727. 
[n]	K. Yoo, M. Chung, S. Heo, J. H. Lee, Y. H. Park, and C. Lim, “Offline Test of EBIS Charge Breeder for RAON Facility Using Cs1+ Ion Beam”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR4WH03, unpublished. 
[n]	R. Ghanbari et al., “Correlating Lambda Shift Measurements with RF Performance in Mid-T Heat Treated Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 124-128. doi:10.18429/JACoW-SRF2023-MOPMB021
[n]	G. M. Wang et al., “NSLS II Injector Integrated Testing”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA063, pp. 3285-3287. 
[n]	S. W. Lee and Y. W. Kang, “RF and Thermo-Mechanical Considerations in Designing the Waveguide Iris Coupler for the Drift Tube Linac in the ORNL Spallation Neutron Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3796-3798. doi:10.18429/JACoW-IPAC2018-THPAL063
[n]	T. Kramer et al., “Feasibility of kicker systems for FCC-ee and injectors”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 470-473. doi:10.18429/JACoW-IPAC2025-MOPM065
[n]	H. Guler et al., “Power Coupler Design for the LUCRECE Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3732-3735. doi:10.18429/JACoW-IPAC2018-THPAL041
[n]	V. Gubin, O. Alyakrinsky, S. P. Bardakhanov, and M. Golkovsky, “About Carbides-made Nanoceramics Fission Target for RIB Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC089, pp. 268-270. 
[n]	D. Woog, M. J. Barnes, L. Ducimeti?â, J. Holma, and T. Kramer, “Design of an Inductive Adder for the FCC Injection Kicker Pulse Generator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3312-3315. doi:10.18429/JACoW-IPAC2017-WEPVA024
[n]	G. Felcsuti and J. B. González Fernández, “Structural Dynamic Testing and Design Evaluation of the Formax Detector Gantry”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper THOBM01, unpublished. 
[n]	I. Sakai et al., “Opposite Field Septum Magnet System for the J-PARC 50GeV Ring Injection”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT079, pp. 1339-1341. 
[n]	G. Zschornack et al., “A New Ion Beam Beam Facility for Slow Highly Charged Ions”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT023, pp. 1189-1191. 
[n]	B. Henrist, P. Costa Pinto, S. Fiotakis, M. Himmerlich, and C. Kouzios, “Large scale production of amorphous carbon coatings for the new beam screens of the HL-LHC project”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7175, unpublished. 
[n]	Yu. I. Maltseva, A. R. Frolov, and V. G. Prisekin, “Beam Loss Measurements Using the Cherenkov Effect in Optical Fiber for the BINP e?e? Injection Complex”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 233-237. doi:10.18429/JACoW-IBIC2019-TUAO03
[n]	G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 474-477. doi:10.18429/JACoW-IPAC2025-MOPM066
[n]	V. V. Katalev, S. S. Kovalev, V. G. Kudryavtsev, and I. I. Sulygin, “The 200 MHz Accelerating Structure for UNK”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1197-1200. 
[n]	A. Nordt et al., “Development and Realisation of the ESS Machine Protection Concept”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 545-548. doi:10.18429/JACoW-ICALEPCS2015-TUC3O03
[n]	B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “A Proposal to Pulse the Bevatron/Bevalac Main Guide Field Magnet with SCR Power Supplies”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1893-1896. 
[n]	P. P. Blagovolin, I. V. Chuvilo, I. M. Kapchinskiy, and N. V. Lazarev, “High Current Ion Linacs for Transmutation of Long-Lived Wastes”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH467, pp. 778-781. 
[n]	L. Groening, M. Heilmann, M. Kaiser, S. Mickat, and T. Dettinger, “Update on the intense heavy ion DTL project Alvarez 2.0 at GSI”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 394-396. doi:10.18429/JACoW-LINAC2024-TUPB028
[n]	J. Ruf et al., “Development of a fast pulsed magnet system for the MYRRHA collaboration”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1084-1087. doi:10.18429/JACoW-IPAC2024-TUPC37
[n]	W. Leemans et al., “Experimental Progress on a 1 GeV Laser Accelerator at LBNL”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPAE019, unpublished. 
[n]	A. M. Kozodaev et al., “The Design of High Reliable RF System for High Power Linacs”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P026, pp. 2965-2967. 
[n]	B. Gamage, E. Nissen, K. Deitrick, and R. Bodenstein, “Radiation dose simulations for Jefferson Lab’s permanent magnet resiliency LDRD study”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3872-3874. doi:10.18429/JACoW-IPAC2024-THPS57
[n]	K. Y. Ng and A. Bogacz, “Low-Dispersion γt Jump for the Main Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR17, pp. 3388-3390. 
[n]	C. G. R. Geddes et al., “Mono Energetic Beams from Laser Plasma Interactions”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPA001, pp. 69-73. 
[n]	A. S. Gurevich and P. N. Chirkov, “COMPUTATIONAL SIMULATION AND EXPERIMENTAL RESEARCH OF BEAM RF CAPTURE INTO IHEP BOOSTER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH22, pp. XX-XX. 
[n]	L. Groening et al., “Status of the New Intense Heavy Ion DTL Project Alvarez 2.0 at GSI”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 537-540. doi:10.18429/JACoW-LINAC2022-TUPOGE19
[n]	J. Fugitt, H. Lancaster, and R. Sorensen, “New RF Power System for SuperHILAC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2873-2876. 
[n]	D. Khan and T. O. Raubenheimer, “Approximated Expressions for the Coherent Synchrotron Radiation Effect in Bending Magnets”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 300-304. doi:10.18429/JACoW-FEL2017-TUP028
[n]	I. V. Chuvilo et al., “Linear Accelerator for Plutonium Conversion and Transmutation of NPP Wastes”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1675-1681. 
[n]	M. Barnes et al., “Operational experience of a low beam coupling impedance injection kicker magnet for the CERN SPS ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4352-4355. doi:10.18429/JACoW-IPAC2023-THPA164
[n]	A. Zhadan, V. V. Sotnikov, V. A. Voronko, S. I. Tyutyunnikov, and P. Zhivkov, “Spatial Distributions of natU(n,f), 238U(n,g) Reaction Rates in Spallation Neutron Fields Produced by Deuterons and 12C Ions on the Massive Uranium Target”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4753-4756. doi:10.18429/JACoW-IPAC2017-THPVA129
[n]	N. V. Lazarev et al., “CONSTRUCTION OF SMALL-SCALE MULTIPURPOSE ADS AT ITEP”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP053, pp. XX-XX. 
[n]	S. Fisher and C. Gallardo, “Coherent X-Rays from PEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2748-2751. 
[n]	K. MacKenzie, L. Kanstein, R. Sorensen, L. Glasgow, and J. Vale, “The Berkeley Synchrocyclotron Improvement Programme”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69H02, pp. XX-XX. 
[n]	D. Khan and T. O. Raubenheimer, “Cancellation of Coherent Synchrotron Radiation Kicks at LCLS”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 296-299. doi:10.18429/JACoW-FEL2017-TUP027
[n]	A. Tuzikov et al., “Beam Transfer Systems of NICA Facility: from HILAC to Booster”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 61-64. doi:10.18429/JACoW-RuPAC2021-WEA01
[n]	A. Y. Zelinsky, P. Gladkikh, I. M. Karnaukhov, V. Markov, A. Mytsykov, and A. A. Shcherbakov, “Lattice of NSC KIPT Compact Intense X-ray Generator NESTOR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT134, pp. 1440-1442. 
[n]	I. Sakai et al., “Operation of the Opposite-Field Septum Magnet for the J-PARC Main-Ring Injection”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS107, pp. 1750-1752. 
[n]	I. Sexton et al., “The Drift Tube Welding Assembly for the Linac4 Drift Tube Linac at CERN”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP038, pp. 929-931. 
[n]	K. O. E. Martensson, B. Bradu, and G. Ferlin, “Signal Analysis for Automated Diagnostic Applied to LHC Cryogenics”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1608. doi:10.18429/JACoW-ICALEPCS2019-THCPL05
[n]	M. Heilmann et al., “Design Study for a Prototype Alvarez-Cavity for the Upgraded Unilac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2205-2207. doi:10.18429/JACoW-IPAC2017-TUPVA057
[n]	S. Efimov, “Fringing Field Effects of Magnets in Cyclic Accelerators”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP066L, pp. 965-967. 
[n]	E. Waagaard et al., “Design of a new CERN SPS injection system via numerical optimisation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 267-270. doi:10.18429/JACoW-IPAC2023-MOPA097
[n]	J. Aishima, A. Ashton, S. Fisher, K. Levik, and G. Winter, “Monitoring and Cataloguing the Progress of Synchrotron Experiments, Data Reduction, and Data Analysis at Diamond Light Source From a User's Perspective”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 822-825. doi:10.18429/JACoW-ICALEPCS2015-WEPGF053
[n]	A. Coxe et al., “Status of error correction studies in support of FFA@CEBAF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 949-951. doi:10.18429/JACoW-IPAC2023-MOPL177
[n]	D. Khan and T. O. Raubenheimer, “An Emittance-Preservation Study of a Five-Bend Chicane for the LCLS-II-HE Beamline”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 305-308. doi:10.18429/JACoW-FEL2017-TUP030
[n]	M. Wenskat, C. Bate, R. Ghanbari, W. Hillert, and C. Martens, “A New Ultra-High Vacuum Furnace for SRF R&D”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 855-858. doi:10.18429/JACoW-SRF2023-WEPWB111
[n]	D. Alesini, “Roma; A. Kucharczyk”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI058, pp. 2115-2117. 
[n]	G. Favia et al., “SPS injection kicker system: 2023 operational experience and upgrade proposals for high-luminosity LHC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1088-1091. doi:10.18429/JACoW-IPAC2024-TUPC38
[n]	A. Coxe, J. Benesch, K. Price, K. Deitrick, R. Bodenstein, and T. Satogata, “Beam correction for multi-pass arcs in FFA@CEBAF: status update”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1057-1059. doi:10.18429/JACoW-IPAC2024-TUPC23
[n]	R. Bodenstein et al., “Designing the spreaders and splitters for the FFA@CEBAF energy upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 965-968. doi:10.18429/JACoW-IPAC2023-MOPL183
[n]	L. Millar et al., “Searching for axions: a new SRF cavity-based programme at CERN”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 791-797. doi:10.18429/JACoW-SRF2025-THP80
[n]	C. Zannini et al., “MKP-L Impedance Mitigation and Expectations for MKP-S in the CERN-SPS”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 466-469. doi:10.18429/JACoW-HB2023-THBP11
[n]	R. Abukeshek et al., “Magnetic design of the commutational magnet and quadrupoles for PERLE accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 85-88. doi:10.18429/JACoW-IPAC2023-MOPA023
[n]	R. Bodenstein et al., “Summary of Jefferson Lab LDRD on FFA@CEBAF beam dynamics simulations”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1060-1063. doi:10.18429/JACoW-IPAC2024-TUPC24
[n]	D. Olsson et al., “A Transverse Deflecting Cavity Prototype for the MAX IV LINAC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 575-577. doi:10.18429/JACoW-IBIC2019-WEPP025
[n]	M. Heilmann, T. Dettinger, X. Du, L. Groening, S. Mickat, and A. Rubin, “LLRF Measurements and Cu-plating at the First-of-Series Cavity Section of the Alvarez 2.0 at GSI”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 686-689. doi:10.18429/JACoW-IPAC2021-MOPAB208
[n]	L. van Riesen-Haupt et al., “The status of the FCC-ee optics tuning”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2449-2452. doi:10.18429/JACoW-IPAC2024-WEPR02

For LaTeX

Use Complete Form

For BibTeX

References

Back to search