JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Blom, B. Glimelius, E. Grusell, S. Lorin, J. Medin, and N. Tilly, “Development of a Scanning System for Proton Therapy in Uppsala”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP02C, pp. 2450-2451. 
[n]	A. Olmos, F. P?®rez, and G. Rehm, “Matlab Code for BPM Button Geometry Computation”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC19, pp. 186-188. 
[n]	G. Decker Argonne National Laboratory, “Orbit Control at the Advanced Photon Source”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM07, pp. XX-XX. 
[n]	A. Valentinov, A. Kadnikov, Y. Krylov, S. Kuznetsov, and Y. Yupinov, “Control System of the Synchrotron Radiation Source SIBERIA-2”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA04, pp. 2199-2201. 
[n]	M. Omet et al., “Operation Experiences with the MICROTCA.4-based LLRF Control System at FLASH”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 844-846. doi:10.18429/JACoW-IPAC2015-MOPHA029
[n]	I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “LO Board for 704.42 MHz Cavity Simulator for ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1573-1576. doi:10.18429/JACoW-ICALEPCS2017-THPHA081
[n]	R. J. Steinhagen et al., “Results of the LHC Prototype Chromaticity Measurement System Studies in the CERN-SPS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC098, pp. 1290-1292. 
[n]	O. Chubar et al., “Electron Beam Size and Profile Measurements with Refractive X-Ray Lenses”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4B10, pp. 1824-1828. 
[n]	J. Rathke, “Cavity Production and R&D in US Industry”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIAKI01, pp. 2670-2670. 
[n]	T. Kasuga, M. Mochihashi, T. Obina, and Y. Tanimoto, “Optical Bunch-By-Bunch Diagnostic System in KEK-PF”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS03, pp. XX-XX. 
[n]	M. Ross, “Review Of Diagnostics For Next Generation Linear Accelerators”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper IT01, pp. XX-XX. 
[n]	T. S. Ueng, K. T. Hsu, C. S. Fang, Y. M. Chang, and K. K. Lin, “Turn-by-Turn Beam Position Measurement for 1.3 GeV Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ32, pp. 2524-2526. 
[n]	J. Urbin and R. D. Nolte, “Large Helium Refrigeration Plant Operating Experience”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THICKI03, pp. 2700-2700. 
[n]	J. L. Rothman and E. B. Blum, “Charge Balancing Fill Rate Monitor”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ01, pp. 2450-2451. 
[n]	K. E. Hacker et al., “Progress Towards HGHG and EEHG at FLASH”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD13, pp. 257-260. 
[n]	G. A. Naylor Grenoble, “DSP and FPGA Based Bunch Current Signal Processing”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM21, pp. XX-XX. 
[n]	C.-H. Chang et al., “Conceptual Designs of Magnet Systems for the Taiwan Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT076, pp. 3979-3981. 
[n]	K. Olsen, “Introduction to the PAC'07 International Industrial Forum for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIIKI01, pp. 2664-2664. 
[n]	M. Ferianis and R. De Monte, “The Low Gap BPM System at ELETTRA: Commissioning Results”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM06, pp. XX-XX. 
[n]	M. Jensen, “Operational Experience with SRF Cavities for Light Sources”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOIOB05, pp. 27-31. 
[n]	S. Chunjarean, C.-S. Hwang, J. C. Jan, F.-Y. Lin, and P. H. Lin, “Field Optimization in Superconducting Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP079, pp. 2450-2452. 
[n]	M. Leitner et al., “Design Status of the SRF Linac Systems for the Facility for Rare Isotope Beams”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO009, pp. 56-64. 
[n]	T. K. Charles, J. Bj?Ârklund Svensson, A. Latina, and S. Thorin, “First Experimental Measurements of the Caustic Nature of Trajectories in Bunch Compressors”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2270-2273. doi:10.18429/JACoW-IPAC2019-WEYYPLS2
[n]	M. A. Pop and E. Allaria, “A Peak Finding Algorithm for FEL Spectra Characterization”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1827-1829. doi:10.18429/JACoW-IPAC2019-TUPRB070
[n]	G. Swain, M. Burns, and P. Busch, “Generating Catalogs of Transverse Matching Solutions”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 598-601. 
[n]	F. Nolden Gesellschaft f??r Schwerionenforschung, “Instrumentation And Diagnostics Using Schottky Signals”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper IT02, pp. XX-XX. 
[n]	R. Sabattier, N. Breteau, and G. Goin, “The Tenth Year of the Orleans Neutrontherapy Facility”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1810-1812. 
[n]	S. A. Pande, R. Bartolini, R. T. Fielder, and M. Jensen, “Impedance Estimation of Diamond Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP058, pp. 1673-1675. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search