Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. V. Fedotov et al., “IBS for Ion Distribution Under Electron Cooling”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT091, pp. 4263-4265.
[n] N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384.
[n] Ph. Bernard et al., “Superconducting Niobium Sputter-coated Copper Cavities at 1500 MHz”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1269-1272.
[n] R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519.
[n] D. Yu, R. Yi, and A. Smirnov, “Band Gap Structures of PBG and Rod-loaded Cavities”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP048, pp. 688-690.
[n] D. Bibet, A. Dael, and M. Ohayon, “The GANIL Magnet”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-15, pp. 1940-1943.
[n] J. J. Song et al., “MM-Wave Cavity/Klystron Developments Using Deep X-Ray Lithography at the Advanced Photon Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E204, pp. 298-300.
[n] H. Vormann, W. A. Barth, M. Miski-Oglu, U. Scheeler, M. Vossberg, and S. Yaramyshev, “High Intensity Heavy Ion Beam Optimization at GSI UNILAC”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 110-113. doi:10.18429/JACoW-LINAC2022-MOPOPA18
[n] Yu. Shatunov and V. Yakimenko, “Simulation of the Acceleration of Polarized Protons in Circular Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR31, pp. 3427-3430.
[n] W. A. Barth, M. Miski-Oglu, U. Scheeler, H. Vormann, M. Vossberg, and S. Yaramyshev, “UNILAC Heavy Ion Beam Operation at FAIR Intensities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 102-105. doi:10.18429/JACoW-LINAC2022-MOPOPA16
[n] A. Oates, “CLARA Gun Temperature Control Using Omron PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1646-1648. doi:10.18429/JACoW-ICALEPCS2017-THPHA114
[n] D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 78-81. doi:10.18429/JACoW-IBIC2019-MOPP007
[n] I. Neththikumara, G. A. Krafft, Y. Roblin, and B. Terzi, “Electron-Ion Collider Performance Studies With Beam Synchronization via Gear-Change”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 553-555. doi:10.18429/JACoW-NAPAC2019-TUPLO09
[n] N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4376-4379. doi:10.18429/JACoW-IPAC2019-FRXXPLS3
[n] H. Tian et al., “New Progress with HF-free Chemical Finishing for Nb SRF Cavities”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 431-434. doi:10.18429/JACoW-LINAC2018-TUPO043
[n] H. Owen, “Beam Lifetime at the SRS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W004, pp. 333-335.
[n] V. Ptitsin, S. Tepikian, and J. Wei, “BNL-Built LHC Magnet Error Impact Analysis and Compensation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP43, pp. 1575-1577.
[n] A. M. Marendziak, M. Rozwadowski, T. Sobol, M. J. Stankiewicz, and A. I. Wawrzyniak, “Three Years of Operational Experience With the Solaris Vacuum System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3888-3890. doi:10.18429/JACoW-IPAC2018-THPAL107
[n] F. Iazzourene et al., “Elettra Top-up Requirements and Design Status”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS031, pp. 3350-3352.
[n] N. ROUX, F. TOURNEMENNE, J.-P. AIRIAU, M. AUBIN, and S. PALMIER, “Experimental supervision tools software upgrade on the Laser Megajoule facility”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1379-1383. doi:10.18429/JACoW-ICALEPCS2025-THBR002
[n] M. Farkhondeh, R. Averill, W. W. Sapp, and J. D. Zumbro, “Low-sextupole Steering Dipoles for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2348-2351.
[n] R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
[n] J. Smedley, R. S. Lefferts, A. R. Lipski, J. Sekutowicz, T. Srinivasan-Rao, and J. Warren, “Photoemission Properties of Lead”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF080, pp. 1126-1128.
[n] M. Gaowei, R. Begay, K. P. Mondal, J. Walsh, and Y. Yang, “Epitaxial growth of sodium potassium antimonide photocathodes”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM039, unpublished.
[n] H. D. Beerling-Van der Molen et al., “The Production of Radionuclides for Medical Application with the 280 cm AVF Cyclotron in Groningen”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-13, pp. 2271-2273.
[n] A. Plastun et al., “Resonant cavity for quadrupole moment measurements of heavy ion beams”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 236-240. doi:10.18429/JACoW-NAPAC2025-MOP083
[n] O. Matilla et al., “Em# Platform: Towards a Hardware Interface Standardization Scheme”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 885-888. doi:10.18429/JACoW-ICALEPCS2015-WEPGF081
[n] Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
[n] D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 124-127. doi:10.18429/JACoW-MEDSI2016-TUBA04
[n] S. Ferry and E. Karantzoulis, “The FERMI@elettra Beam Dump”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP042, pp. 2887-2889.
[n] J. Y. Benitez et al., “Current Developments of the VENUS Ion Source in Research and Operations”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper THXO02, pp. 153-158.
[n] P. S. Sagalo, L. J. Dudek, A. Kisiel, G. W. Kowalski, A. I. Wawrzyniak, and P. P. Goryl, “The Novel Implementation of the Orbit Correction Algorithm for Solaris Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1861-1863. doi:10.18429/JACoW-IPAC2017-TUPIK071
[n] J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 280-282. doi:10.18429/JACoW-MEDSI2018-WEPH34
[n] W. Venturini Delsolaro et al., “Status of the SRF Systems at HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA01, pp. 481-487.
[n] Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
[n] R. D. Walton et al., “Mapping Developments at Diamond”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1111-1114. doi:10.18429/JACoW-ICALEPCS2015-THHB3O01
[n] K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
For LaTeX
Use Complete Form
For BibTeX
References
- A. V. Fedotov et al., “IBS for Ion Distribution Under Electron Cooling”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT091, pp. 4263-4265.
- N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384.
- Ph. Bernard et al., “Superconducting Niobium Sputter-coated Copper Cavities at 1500 MHz”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1269-1272.
- R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519.
- D. Yu, R. Yi, and A. Smirnov, “Band Gap Structures of PBG and Rod-loaded Cavities”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP048, pp. 688-690.
- D. Bibet, A. Dael, and M. Ohayon, “The GANIL Magnet”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-15, pp. 1940-1943.
- J. J. Song et al., “MM-Wave Cavity/Klystron Developments Using Deep X-Ray Lithography at the Advanced Photon Source”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E204, pp. 298-300.
- H. Vormann, W. A. Barth, M. Miski-Oglu, U. Scheeler, M. Vossberg, and S. Yaramyshev, “High Intensity Heavy Ion Beam Optimization at GSI UNILAC”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 110-113.
- Yu. Shatunov and V. Yakimenko, “Simulation of the Acceleration of Polarized Protons in Circular Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR31, pp. 3427-3430.
- W. A. Barth, M. Miski-Oglu, U. Scheeler, H. Vormann, M. Vossberg, and S. Yaramyshev, “UNILAC Heavy Ion Beam Operation at FAIR Intensities”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 102-105.
- A. Oates, “CLARA Gun Temperature Control Using Omron PLC”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1646-1648.
- D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 78-81.
- I. Neththikumara, G. A. Krafft, Y. Roblin, and B. Terzi, “Electron-Ion Collider Performance Studies With Beam Synchronization via Gear-Change”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 553-555.
- N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4376-4379.
- H. Tian et al., “New Progress with HF-free Chemical Finishing for Nb SRF Cavities”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 431-434.
- H. Owen, “Beam Lifetime at the SRS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W004, pp. 333-335.
- V. Ptitsin, S. Tepikian, and J. Wei, “BNL-Built LHC Magnet Error Impact Analysis and Compensation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP43, pp. 1575-1577.
- A. M. Marendziak, M. Rozwadowski, T. Sobol, M. J. Stankiewicz, and A. I. Wawrzyniak, “Three Years of Operational Experience With the Solaris Vacuum System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3888-3890.
- F. Iazzourene et al., “Elettra Top-up Requirements and Design Status”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS031, pp. 3350-3352.
- N. ROUX, F. TOURNEMENNE, J.-P. AIRIAU, M. AUBIN, and S. PALMIER, “Experimental supervision tools software upgrade on the Laser Megajoule facility”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1379-1383.
- M. Farkhondeh, R. Averill, W. W. Sapp, and J. D. Zumbro, “Low-sextupole Steering Dipoles for the MIT-Bates SHR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2348-2351.
- R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
- J. Smedley, R. S. Lefferts, A. R. Lipski, J. Sekutowicz, T. Srinivasan-Rao, and J. Warren, “Photoemission Properties of Lead”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF080, pp. 1126-1128.
- M. Gaowei, R. Begay, K. P. Mondal, J. Walsh, and Y. Yang, “Epitaxial growth of sodium potassium antimonide photocathodes”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM039, unpublished.
- H. D. Beerling-Van der Molen et al., “The Production of Radionuclides for Medical Application with the 280 cm AVF Cyclotron in Groningen”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper E-13, pp. 2271-2273.
- A. Plastun et al., “Resonant cavity for quadrupole moment measurements of heavy ion beams”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 236-240.
- O. Matilla et al., “Em# Platform: Towards a Hardware Interface Standardization Scheme”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 885-888.
- Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
- D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 124-127.
- S. Ferry and E. Karantzoulis, “The FERMI@elettra Beam Dump”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP042, pp. 2887-2889.
- J. Y. Benitez et al., “Current Developments of the VENUS Ion Source in Research and Operations”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper THXO02, pp. 153-158.
- P. S. Sagalo, L. J. Dudek, A. Kisiel, G. W. Kowalski, A. I. Wawrzyniak, and P. P. Goryl, “The Novel Implementation of the Orbit Correction Algorithm for Solaris Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1861-1863.
- J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 280-282.
- W. Venturini Delsolaro et al., “Status of the SRF Systems at HIE-ISOLDE”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUBA01, pp. 481-487.
- Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
- R. D. Walton et al., “Mapping Developments at Diamond”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1111-1114.
- K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
Back to search