JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Socol, G. N. Kulipanov, A. N. Matveenko, O. A. Shevchenko, and N. Vinokurov, “13.5-nm Free-Electron Laser for EUV Lithography”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPA28, pp. 250-253. 
[n]	R. Rossmanith et al., “Operation of the ANKA Synchrotron Light Source with Superconductive Undulators”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE039, pp. 2559-2561. 
[n]	J. G. Alessi et al., “Performance of the New AGS RFQ Preinjector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 999-1002. 
[n]	J. Alessi et al., “The New AGS H- RFQ Preinjector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 538-541. 
[n]	A. S. Matveev, I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, N. A. Vinokurov, and V. Volkov, “Simulation and Optimization of the Transport Beamline for the NovoFEL RF Gun”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 647-650. doi:10.18429/JACoW-FEL2019-THP027
[n]	P. Thingstad, “Inert Gas Purifier for SLAC's Two-Meter Steamer Chamber”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 659-661. 
[n]	S. S. Kurennoy, A. J. Jason, and W. M. Tuzel, “Aperture Windows in High-Gradient Cavities for Accelerating Low-Energy Muons”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ029, pp. 862-864. 
[n]	F. S. He, J. K. Hao, F. Wang, W. Xu, B. C. Zhang, and K. Zhao, “Analytical and Experimental Study of Crosstalk in the Superconducting Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP045, pp. 2098-2100. 
[n]	T. L. Smith, N. P. DiMonte, A. Nassiri, Y.-E. Sun, and A. Zholents, “RF Conditioning of the Photo-Cathode RF Gun at the Advanced Photon Source - NWA RF Measurements”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2621-2623. doi:10.18429/JACoW-IPAC2015-WEPWA052
[n]	G. LeBlanc et al., “MAX 4, a 3 GeV Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG025, pp. 2321-2323. 
[n]	P. M. Ivanov et al., “Head-Tail Instability at Tevatron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB021, pp. 3062-3064. 
[n]	S. S. Kurennoy, A. J. Jason, and H. M. Miyadera, “Large-Acceptance Linac for Accelerating Low-Energy Muons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE075, pp. 3518-3520. 
[n]	K. Jimbo, K. Leung, T. Shirai, and K. A. Van Bibber, “Proposal for a Compact Neutron Generator Based on a Negative Deuterium Ion Beam”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1599-1601. doi:10.18429/JACoW-IPAC2022-WEOXSP1
[n]	J. K. Hao et al., “SRF Activities at Peking University”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOB01, pp. 969-972. 
[n]	H. M. Miyadera, A. J. Jason, and S. S. Kurennoy, “Simulation of Large Acceptance Muon Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE076, pp. 3521-3523. 
[n]	M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3069-3071. doi:10.18429/JACoW-IPAC2015-WEPMN062
[n]	B. Anderberg et al., “The 500 MeV Injector for MAX-lab using a Recirculated Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B06, pp. 1687-1692. 
[n]	C. Benabderrahmane et al., “Magnets for the ESRF-EBS Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1096-1099. doi:10.18429/JACoW-IPAC2016-TUPMB001
[n]	S. Werin, F. Curbis, M. Eriksson, C. Quitmann, S. Thorin, and P. Johnsson, “Towards an X-ray FEL at the MAX IV Laboratory”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP080, pp. 549-552. 
[n]	J. G. Alessi et al., “AGS Preinjector Improvement”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 276-279. 
[n]	F. J. M. Farley and C. Carli, “EULIMA Beam Delivery”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1796-1799. 
[n]	H. M. Miyadera, A. J. Jason, and K. Nagamine, “Design of Muon Accelerators for an Advanced Muon Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS017, pp. 3032-3034. 
[n]	T. Ohnishi, S. Ichikawa, and M. Wakasugi, “Electron-Beam-Driven RI Separator for SCRIT at RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB02, pp. 194-196. 
[n]	E. M. Mashkina et al., “Magnetic Measurement Device for Superconductive Undulator Mock-up Coils at ANKA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC121, pp. 2291-2293. 
[n]	J. K. Hao et al., “3.5-Cell Superconducting Cavity for DC-SRF Photoinjector at Peking University”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO013, pp. 205-207. 
[n]	V. Ranjbar et al., “Spin Coupling Resonance Study in AGS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE050, pp. 356-358. 
[n]	Y. Irie et al., “Precise Cavity Tuning System of a Low Output-impedance Second-harmonic Cavity at ISIS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI062, pp. 2836-2838. 
[n]	M. A. G. Johansson, L.-J. Lindgren, and B. Anderberg, “MAX IV 3 GeV Storage Ring Prototype Magnet”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO015, pp. 2427-2429. 
[n]	S. A. Litvinov, A. Dolinskyy, O. E. Gorda, M. Steck, H. Weick, and D. Toprek, “Effects of Field Imperfections in the Isochronous Mode of the CR Storage Ring at FAIR”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA009, pp. 2510-2512. 
[n]	M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1157-1159. doi:10.18429/JACoW-IPAC2016-TUPMB023
[n]	R. Appleby, D. A.-K. Angal-Kalinin, P. Bambade, S. Cavalier, O. Dadoun, and D. Toprek, “Improved 2mrad crossing angle layout for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN077, pp. 2883-2885. 
[n]	M. Sj?Âstr?Âm, M. Eriksson, L.-J. Lindgren, and E. J. Wall?®n, “Corrector Based Determination of Quadrupole Centres”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC119, pp. 1347-1349. 
[n]	P. Ferracin, “Modeling Techniques for Design and Analysis of Superconducting Accelerator Magnets”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TU3IODN03, pp. 77-82. 
[n]	H. M. Miyadera, A. J. Jason, and S. S. Kurennoy, “Simulation of Large Acceptance Linac for Muons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP071, pp. 4941-4943. 
[n]	Y. D. Li and K.-B. Liu, “TPS Fast Corrector Magnet Power Converter”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO019, pp. 3379-3381. 
[n]	R. Rossmanith et al., “Superconductive Damping Wigglers for the CLIC Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN023, pp. 200-202. 
[n]	G. LeBlanc et al., “Status of the MAX-III Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG024, pp. 2318-2320. 
[n]	Lj. Milinkovic and D. Toprek, “Axial Focusing in the Acceleration Gaps of the Cyclotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP138G, pp. 1306-1310. 
[n]	Lj. Milinkovic, B. Brajuskovic, and D. Toprek, “Injection and Central Region Studies for the VINCY Cyclotron”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1516-1519. 
[n]	D. Shu, P. K. Job, and M. Kuzay, “CVD-Diamond-Based Position Sensitive Photoconductive Detector for High-Flux X-Rays and Gamma Rays”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA90, pp. 2090-2092. 
[n]	H. Tarawneh, ?à. Andersson, M. Bergqvist, M. Brandin, M. Eriksson, and L. Malmgren, “Higher Order Modes in the New 100 and 500 MHz Cavities at MAX-lab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT137, pp. 2158-2160. 
[n]	H. Zhang, Y. M. Li, K. X. Liu, F. Wang, and B. C. Zhang, “LLRF Control System for PKU DC-SC Photocathode Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC097, pp. 304-306. 
[n]	N. Vinokurov, O. A. Shevchenko, and V. G. Tcheskidov, “Variable-period Permanent Magnet Undulators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOC3, pp. 696-699. 
[n]	G. LeBlanc et al., “Status of the MAX-lab Injector Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH080, pp. 2278-2280. 
[n]	I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, and N. Vinokurov, “The Prototype of New Variable Period Undulator for Novosibirsk Free Electron Laser.”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 677-680. doi:10.18429/JACoW-FEL2015-WEP051
[n]	Y. D. Li, Y.-C. Chien, and K.-B. Liu, “TPS Digital Corrector Magnet Power Converter based on FPGA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO020, pp. 3382-3384. 
[n]	V. Ranjbar, S. Y. Lee, M. Bai, E. Courant, and W. W. MacKay, “Mapping Out the Full Spin Resonance Structure of RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH139, pp. 3177-3179. 
[n]	D. Toprek and Lj. Milinkovi, “Design of the Central Region for the Axial Injection in the VINCY Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2361-2364. 
[n]	S. Casalbuoni et al., “Investigations of the Thermal Beam Load of a Superconducting In-vacuum Undulator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS122, pp. 3568-3570. 
[n]	S. Arai, T. Fujino, T. Fukushima, T. Hattori, E. Tojyo, and N. Tokuda, “Split Coaxial RFQ Linac with Modulated Vane”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3175-3178. 
[n]	D. Trbojevic and E. Courant, “Low Emittance Lattices for Electron Storage Rings Revisited”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1000-1003. 
[n]	R. Rossmanith et al., “A Year's Experience with a Superconducting Undulator in the Storage Ring ANKA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS123, pp. 3571-3573. 
[n]	J. K. Hao et al., “Improving Gradient of 9-cell SRF Cavities at Peking University”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP011, pp. 914-916. 
[n]	K.-B. Liu, K. T. Hsu, Y. D. Li, and B. S. Wang, “TPS Magnet Power Supply System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD075, pp. 3275-3277. 
[n]	?à. Andersson, M. Bergqvist, M. Eriksson, L. Malmgren, and L. Th?Ñnell, “The 100 MHz RF System for MAX-II and MAX-III”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE082, pp. 2118-2120. 
[n]	M. Eriksson, M. Bergqvist, M. Brandin, L.-J. Lindgren, M. Sj?Âstr?Âm, and S. Thorin, “MAX III Commissioning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS058, pp. 3416-3417. 
[n]	C.-Y. Liu and Y. D. Li, “Design and Implementation a Resonant Dc Power Bus”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD074, pp. 3272-3274. 
[n]	Y. D. Menshov, “CALCULATION OF THE VACUUM SYSTEM  OF THE MCC 30/15 CYCLOTRON”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH10, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search