Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
[n] G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
[n] R. Tikhoplav et al., “Terahertz Camera Development Status”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP050, pp. 4066-4068.
[n] N. Magnin et al., “Upgrade of the Trigger Synchronisation and Distribution System of the Beam Dumping System of the Large Hadron Collider”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 397-400. doi:10.18429/JACoW-ICALEPCS2015-MOPGF135
[n] J. D. Gilpatrick et al., “Proposed Beam Position and Phase Measurements for the LANSCE Linac”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB10, pp. 78-80.
[n] R. Ferdinand et al., “Commissioning of SPIRAL2 CW RFQ and Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2462-2465. doi:10.18429/JACoW-IPAC2017-WEOAA1
[n] T. G. Lee, Y. U. Nam, and M. K. Park, “New Development of EPICS-based Data Acquisition System for Millimeter-wave Interferometer in KSTAR Tokamak”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUCAUST05, pp. 577-580.
[n] T. Noll and F. Radu, “The Mechanics of the Vekmag Experiment”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 370-373. doi:10.18429/JACoW-MEDSI2016-WEPE38
[n] W. T. Weng, I.-H. Chiang, G. A. Smith, and A. Soukas, “The Multiwire Secondary Emission Monitor and the Emittance Measurement of the AGS Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2331-2334.
[n] M. Peiniger, G. Mueller, H. Piel, and P. Thuens, “Nb3Sn for Superconducting Accelerators at 4.2 K”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1295-1298.
[n] N. M. Kroll et al., “A High Power SLED-II Pulse Compression System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 327-330.
[n] P. Acs et al., “Tango-Kepler Integration at ELI-ALPS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 212-215. doi:10.18429/JACoW-ICALEPCS2015-MOPGF050
[n] R. Connolly, K. F. Johnson, and V. Yuan, “A Correction for Emittance-Measurement Errors Caused by Finite Slit and Collector Widths”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-19, pp. 657-659.
[n] C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1391-1394.
[n] L. A. Ahrens et al., “High Intensity Proton Operation at the Brookhaven AGS Accelerator Complex”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 485-488.
[n] W. T. Weng, “The Lattice Design and Tolerance Analysis of the CBA Transport Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2463-2466.
[n] M. Bieler, S. Choroba, R. Giebeler, S. Gold, J. Hameister, and H.-Ch. Lewin, “Commissioning of the Hard Tube Pulser Experiment at DESY”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1933-1936.
[n] P. Grand, “Vacuum Requirements for Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
[n] H. Fangohr et al., “Data Analysis Support in Karabo at European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 245-252. doi:10.18429/JACoW-ICALEPCS2017-TUCPA01
[n] J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
[n] D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
[n] F. Di Maio, L. Abadie, C. S. Kim, K. Mahajan, D. Stepanov, and N. Utzel, “CODAC Core System, the ITER Software Distribution for I&C”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC079, pp. 281-284.
[n] D. P. Piso, I. Arredondo, M. Eguiraun, and S. Varnasseri, “ESS Bilbao Interlock System Approach”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC052, pp. 206-209.
[n] R. Eichhorn, F. M. Esser, A. Gussen, and S. Martin, “First Ideas Towards the Super-Conducting Magnet Design for the HESR at FAIR”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT056, pp. 3354-3356.
[n] K. R. Eppley, W. B. Herrmannsfeldt, and T. G. Lee, “Improving the Efficiency of Microwave Devices with a Double Output Cavity”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-29, pp. 109-111.
[n] F. Antoniou et al., “Transverse Emittance Studies at Extraction of the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1058-1061. doi:10.18429/JACoW-IPAC2019-MOPTS087
[n] K. G. Antonyan, L. G. Hakopyan, E. M. Laziev, S. N. Movsesyan, and A. G. Oganessian, “Beam Position Monitor Based on Diffraction Radiation”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-92, pp. 926-928.
[n] M. Attal et al., “Commissioning of SESAME Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2694-2696. doi:10.18429/JACoW-IPAC2017-WEPAB050
[n] T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 600-603. doi:10.18429/JACoW-LINAC2024-THAA003
[n] D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Fabrication of Normalconducting Cavities for Accelerator Application”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 922-925.
[n] L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
[n] C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
[n] M. Cornacchia, R. Lauckner, W. Mills, R. Stiening, E. J. N. Wilson, and G. von Holtey, “Non Linear Fields in the SPS and Their Compensation”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1482-1485.
[n] A. Winter et al., “Bunch Length Measurements at the SLS Linac using Electro-optical Techniques”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOALH01, pp. 253-255.
[n] J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
[n] E. D. Hudson, “Oak Ridge Model Magnet Studies”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59B05, pp. 104-109.
[n] D. Einfeld et al., “Performance of the 800-MeV Injector for the BESSY Storage Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3103-3106.
[n] L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
[n] F. Ameil, C. Betz, G. Cuk, and I. Verstovsek, “The General Interlock System (GIS) for FAIR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 374-377. doi:10.18429/JACoW-ICALEPCS2015-MOPGF125
[n] P. Lapostolle, E. Tanke, and S. Valero, “New General Beam Dynamics Formulation for the Program DYNAC”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-64, pp. 790-792.
[n] A. Rhyder, R. N. Fernandes, and A. C. Starritt, “Qt Based GUI System for EPICS Control Systems”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WECC03, pp. 10-11.
[n] A. Y. Murokh et al., “Development of High Resolution Beam Profile Imaging Diagnostics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF12, pp. 526-526.
[n] M. Acar, E. Blanco, D. Martin-Gomez, and J. P. Palluel, “Remote Controls for the Active Alignment System of the LHC Low Beta Quadrupoles”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP084, pp. 564-566.
[n] D. Jeon, K. Crandall, J. Stovall, and H. Takeda, “Impact of Cavity RF Field Phase and Amplitude Control Uncertainties on the SNS Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB059, pp. 2855-2856.
[n] S. Kwon, J. Davis, M. T. Lynch, M. S. Prokop, S. Ruggles, and P. A. Torrez, “Gain Scheduled Neural Network Tuned PI Feedback Control System for the LANSCE Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS022, pp. 2379-2381.
[n] C. E. Mitchell, R. D. Ryne, and F. H. O, “Accurate Modeling of Fringe Field Effects on Nonlinear Integrable Optics in IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3294-3297. doi:10.18429/JACoW-IPAC2018-THPAK036
[n] M. Allen, “RF Power Sources”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 101-106.
[n] A. Santamar?¡a Garc?¡a et al., “Machine Protection from Fast Crab Cavity Failures in the High Luminosity LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1485-1488. doi:10.18429/JACoW-IPAC2016-TUPMW025
[n] A. Pettersson, D. P. Brodrick, T. Brys, and M. A. Hartl, “Integration of Sample Environment Systems at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 741-744. doi:10.18429/JACoW-ICALEPCS2017-TUPHA141
[n] R. A. Krempaska, A. G. Bertrand, F. Lendzian, and H. Lutz, “High Intensity Proton Accelerator Controls Network Upgrade”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS020, pp. 361-363.
[n] J.-P. Delahaye et al., “A Staged Muon Accelerator Facility for Neutrino and Collider Physics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1872-1876. doi:10.18429/JACoW-IPAC2014-WEZA02
For LaTeX
Use Complete Form
For BibTeX
References
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
- G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
- R. Tikhoplav et al., “Terahertz Camera Development Status”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP050, pp. 4066-4068.
- N. Magnin et al., “Upgrade of the Trigger Synchronisation and Distribution System of the Beam Dumping System of the Large Hadron Collider”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 397-400.
- J. D. Gilpatrick et al., “Proposed Beam Position and Phase Measurements for the LANSCE Linac”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB10, pp. 78-80.
- R. Ferdinand et al., “Commissioning of SPIRAL2 CW RFQ and Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2462-2465.
- T. G. Lee, Y. U. Nam, and M. K. Park, “New Development of EPICS-based Data Acquisition System for Millimeter-wave Interferometer in KSTAR Tokamak”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUCAUST05, pp. 577-580.
- T. Noll and F. Radu, “The Mechanics of the Vekmag Experiment”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 370-373.
- W. T. Weng, I.-H. Chiang, G. A. Smith, and A. Soukas, “The Multiwire Secondary Emission Monitor and the Emittance Measurement of the AGS Beam”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2331-2334.
- M. Peiniger, G. Mueller, H. Piel, and P. Thuens, “Nb3Sn for Superconducting Accelerators at 4.2 K”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1295-1298.
- N. M. Kroll et al., “A High Power SLED-II Pulse Compression System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 327-330.
- P. Acs et al., “Tango-Kepler Integration at ELI-ALPS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 212-215.
- R. Connolly, K. F. Johnson, and V. Yuan, “A Correction for Emittance-Measurement Errors Caused by Finite Slit and Collector Widths”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-19, pp. 657-659.
- C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1391-1394.
- L. A. Ahrens et al., “High Intensity Proton Operation at the Brookhaven AGS Accelerator Complex”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 485-488.
- W. T. Weng, “The Lattice Design and Tolerance Analysis of the CBA Transport Line”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2463-2466.
- M. Bieler, S. Choroba, R. Giebeler, S. Gold, J. Hameister, and H.-Ch. Lewin, “Commissioning of the Hard Tube Pulser Experiment at DESY”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1933-1936.
- P. Grand, “Vacuum Requirements for Linacs”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
- H. Fangohr et al., “Data Analysis Support in Karabo at European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 245-252.
- J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
- D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
- F. Di Maio, L. Abadie, C. S. Kim, K. Mahajan, D. Stepanov, and N. Utzel, “CODAC Core System, the ITER Software Distribution for I&C”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC079, pp. 281-284.
- D. P. Piso, I. Arredondo, M. Eguiraun, and S. Varnasseri, “ESS Bilbao Interlock System Approach”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC052, pp. 206-209.
- R. Eichhorn, F. M. Esser, A. Gussen, and S. Martin, “First Ideas Towards the Super-Conducting Magnet Design for the HESR at FAIR”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT056, pp. 3354-3356.
- K. R. Eppley, W. B. Herrmannsfeldt, and T. G. Lee, “Improving the Efficiency of Microwave Devices with a Double Output Cavity”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-29, pp. 109-111.
- F. Antoniou et al., “Transverse Emittance Studies at Extraction of the CERN PS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1058-1061.
- K. G. Antonyan, L. G. Hakopyan, E. M. Laziev, S. N. Movsesyan, and A. G. Oganessian, “Beam Position Monitor Based on Diffraction Radiation”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-92, pp. 926-928.
- M. Attal et al., “Commissioning of SESAME Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2694-2696.
- T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 600-603.
- D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Fabrication of Normalconducting Cavities for Accelerator Application”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 922-925.
- L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
- C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
- M. Cornacchia, R. Lauckner, W. Mills, R. Stiening, E. J. N. Wilson, and G. von Holtey, “Non Linear Fields in the SPS and Their Compensation”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1482-1485.
- A. Winter et al., “Bunch Length Measurements at the SLS Linac using Electro-optical Techniques”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOALH01, pp. 253-255.
- J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
- E. D. Hudson, “Oak Ridge Model Magnet Studies”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59B05, pp. 104-109.
- D. Einfeld et al., “Performance of the 800-MeV Injector for the BESSY Storage Ring”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3103-3106.
- L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
- F. Ameil, C. Betz, G. Cuk, and I. Verstovsek, “The General Interlock System (GIS) for FAIR”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 374-377.
- P. Lapostolle, E. Tanke, and S. Valero, “New General Beam Dynamics Formulation for the Program DYNAC”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-64, pp. 790-792.
- A. Rhyder, R. N. Fernandes, and A. C. Starritt, “Qt Based GUI System for EPICS Control Systems”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WECC03, pp. 10-11.
- A. Y. Murokh et al., “Development of High Resolution Beam Profile Imaging Diagnostics”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF12, pp. 526-526.
- M. Acar, E. Blanco, D. Martin-Gomez, and J. P. Palluel, “Remote Controls for the Active Alignment System of the LHC Low Beta Quadrupoles”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP084, pp. 564-566.
- D. Jeon, K. Crandall, J. Stovall, and H. Takeda, “Impact of Cavity RF Field Phase and Amplitude Control Uncertainties on the SNS Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB059, pp. 2855-2856.
- S. Kwon, J. Davis, M. T. Lynch, M. S. Prokop, S. Ruggles, and P. A. Torrez, “Gain Scheduled Neural Network Tuned PI Feedback Control System for the LANSCE Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS022, pp. 2379-2381.
- C. E. Mitchell, R. D. Ryne, and F. H. O, “Accurate Modeling of Fringe Field Effects on Nonlinear Integrable Optics in IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3294-3297.
- M. Allen, “RF Power Sources”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 101-106.
- A. Santamar?¡a Garc?¡a et al., “Machine Protection from Fast Crab Cavity Failures in the High Luminosity LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1485-1488.
- A. Pettersson, D. P. Brodrick, T. Brys, and M. A. Hartl, “Integration of Sample Environment Systems at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 741-744.
- R. A. Krempaska, A. G. Bertrand, F. Lendzian, and H. Lutz, “High Intensity Proton Accelerator Controls Network Upgrade”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS020, pp. 361-363.
- J.-P. Delahaye et al., “A Staged Muon Accelerator Facility for Neutrino and Collider Physics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1872-1876.
Back to search