JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Guyot, M. O. Ounsy, and S. Pierre-Joseph Zephir, “Status of the TANGO Archiving System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA27, pp. 570-572. 
[n]	A. Aleksandrov, S. Assadi, W. Blokland, C. Deibele, W. Grice, and J. Pogge, “Beam in Gap Measurements at the SNS Front-End”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG041, pp. 1524-1526. 
[n]	W. M. Fawley et al., “Time-dependent Degradation of an Ion-Focused ATA Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1489-1492. 
[n]	E. V. Kaportsev et al., “Modernization of the Automated Control System in the Kurchatov Synchrotron Radiation Source”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD052, pp. 659-661. 
[n]	L. M. Sevryukova et al., “Superconducting RF Activities at Federate Problem Lab for Technology and Study of the SC Cavities of the Ministry of the Russian Federation for Atomic Energy at the Institute for High Energy Physics”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT004, pp. XX-XX. 
[n]	M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 634-637. 
[n]	A. Zholents, M. Zolotorev, and W. Wan, “Design and Analysis of a Cooling Insertion Lattice for Optical Stochastic Cooling”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V030, pp. 1801-1803. 
[n]	W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1551-1554. 
[n]	N. I. Azorsky et al., “Experimental Study of 100 MW Wide-aperture X-band Klystron with RF Absorbing Drift Tubes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP045L, pp. 2143-2145. 
[n]	J. S. Eldred and A. Valishev, “Design Considerations for Proposed Fermilab Integrable RCS”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1138-1141. doi:10.18429/JACoW-NAPAC2016-THPOA19
[n]	G. Lambert et al., “Seeding the FEL of the SCSS Test Accelerator with the 5th Harmonic of a Ti: Sa Laser Produced in Gases”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC018, pp. 109-111. 
[n]	M. Pezzetti, TB. Barbe, C. F. Fluder, TK. Kubla, SR. Rog, and AT. Tovar-Gonzalez, “Unified Software Production Process for CERN Cryogenic Control Applications”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1480-1484. doi:10.18429/JACoW-ICALEPCS2023-THPDP065
[n]	J. Frisch, D. Bernstein, D. Brown, and E. Cisneros, “A High Stability, Low Noise RF Distribution System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH023, pp. 816-818. 
[n]	S. H. Lee et al., “Mechanical Design of a Compact Collinear Wakefield Accelerator”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 276. doi:10.18429/JACoW-MEDSI2020-WEPB05
[n]	C. R. Emigh, E. A. Meyer, and D. W. Mueller, “Test of LASL Ion Source with 750-kV Accelerating Column”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper J-2, pp. 1007-1025. 
[n]	G. H. Luo et al., “Asynchronized Energy Ramping at SRRC Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA04, pp. 201-203. 
[n]	E. Renner et al., “Towards the slow extraction of mixed He-2+ and C-6+ beams for online range verification”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3603-3606. doi:10.18429/JACoW-IPAC2024-THPR43
[n]	C. F. Fluder, V. Lefebvre, M. Pezzetti, A. Tovar, P. Plutecki, and T. Wolak, “Automation of the Software Production Process for Multiple Cryogenic Control Applications”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 375-379. doi:10.18429/JACoW-ICALEPCS2017-TUPHA006
[n]	P. L. Morton and N. C. Spencer, “Effects of Transverse Coupling in the SLAC Storage Ring”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1099-1101. 
[n]	S. C. Huang, Y. He, T. Tan, and S. X. Zhang, “The Electromagnetic Optimization of TE-sample Host Cavity at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 852-854. doi:10.18429/JACoW-LINAC2018-THPO069
[n]	J. Bobnar, C. K. Allen, S. Peggs, T. A. Pelaia, T. Satogata, and C. G. Trahern, “Applicability of XAL for ESS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL029, pp. 85-87. 
[n]	G. Jackson and T. Ieiri, “Stimulated Longitudinal Emittance Growth in the Main Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 863-866. 
[n]	G. Carron et al., “Recent Machine Studies and Improvements of the CERN Antiproton Accumulator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 834-839. 
[n]	V. Chohan, Z. Y. Guo, C. D. Johnson, and E. J. N. Wilson, “Antiproton Losses at Large Transverse Amplitudes in the CERN Antiproton Accumulator and Corrective Measures Using Skew Quadrupoles and Sextupoles”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2231-2234. 
[n]	R. J. Macek et al., “Recent Observations, Experiments and Simulations of Electron Cloud Effects at the LANL PSR”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA18, pp. 106-111. 
[n]	T. Grey-Morgan and R. E. Hubbard, “The Operation of Cyclotrons Used for Radiopharmaceutical Production”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper II-02, pp. 115-118. 
[n]	W. S. Graves et al., “X-Ray Laser Seeding for Short Pulses and Narrow Bandwidth”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB066, pp. 959-961. 
[n]	G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602. 
[n]	N. Samadi, L. D. Chapman, and L. O. Dallin, “A Vertical Phase Space Beam Position and Emittance Monitor for Synchrotron Radiation”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 186-189. doi:10.18429/JACoW-IBIC2018-TUOB04
[n]	H. A. Grunder, “Survey of Isochronous Cyclotron Technology”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper G-001, pp. XX-XX. 
[n]	J. Welch, G. Codner, G. Dugan, A. Temnykh, A. Jain, and J. Muratore, “Tests and Measurements of the CESR Phase III Interaction Region Superconducting Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH101, pp. 3472-3474. 
[n]	T. Bohl, T. Linnecar, and E. Shaposhnikova, “Study of a Single-bunch Instability below Transition Energy”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A11, pp. 1173-1175. 
[n]	S. S. Yu et al., “Focusing and Neutralization of Intense Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA001, pp. 98-101. 
[n]	G. J. Jan, “Control System at the Synchrotron Radiation Research Center”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1380-1383. 
[n]	C. Deibele et al., “Experimental Tests of a Prototype System for Active Damping of the E-P Instability at the LANL PSR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXC01, pp. 1991-1995. 
[n]	J. J. Barnard et al., “Progress in Heavy Ion Driven Inertial Fusion Energy: From Scaled Experiments to the Integrated Research Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAA005, pp. 314-318. 
[n]	P. C. Chiu, K. T. Hsu, K. H. Hu, C. H. Huang, and C. Y. Liao, “Preliminary Beam Test for TPS Fast Orbit Feedback System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2930-2932. doi:10.18429/JACoW-IPAC2016-WEPOW040
[n]	R. Ganter et al., “SLS 2.0 vacuum components design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4301-4304. doi:10.18429/JACoW-IPAC2023-THPA147
[n]	R. Steinbr??ck, M. Justus, M. Kuntzsch, T. Bergmann, and A. Kessler, “Trigger Generator for the Superconducting Linear Accelerator ELBE”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 46-48. doi:10.18429/JACoW-IBIC2015-MOPB011
[n]	J. D. Bailey, J. Kuchar, F. Marti, and J. Ottarson, “An Internal Timing Probe for Use in the MSU K1200 Cyclotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP08, pp. 369-371. 
[n]	D. Proch et al., “Status Report of the Petra 18-Cell Superconducting Cavity Experiment”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-16, pp. XX-XX. 
[n]	T. Mottershead et al., “Design and Operation of a Proton Microscope for Radiography at 800 MeV”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAA004, pp. 702-704. 
[n]	A. Masi, M. Lamberti, R. Losito, and M. Martino, “Reduction of Magnetic Interference on the Position Sensors of the LHC Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS039, pp. 1623-1625. 
[n]	N. Barov, J. S. Kim, R. H. Miller, and D. J. Newsham, “Novel Acceleration Structure Using Slot Resonance Coupling”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP014, pp. 839-841. 
[n]	J. L. Crisp et al., “Beam Position and Phase Measurements of Microampere Beams at the Michigan State University ReA3 Facility”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC20, pp. 1187-1189. 
[n]	R. E. Hill, “LAMPF First-Fault Identifier for Fast Transient Faults”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S5-4, pp. 283-285. 
[n]	S. Mazzoni et al., “A New Luminosity Monitor for the LHC Run 3”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 163-167. doi:10.18429/JACoW-IBIC2022-MOP45
[n]	W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search