Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. A. Kahn and R. C. Gupta, “Radiation Tolerant Multipole Correction Coils for FRIB Quadrupoles”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA25, pp. 1283-1285.
[n] S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3716-3719. doi:10.18429/JACoW-IPAC2018-THPAL036
[n] G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717.
[n] P. Krejcik et al., “Experience with the SLAC Controls Architecture Evolving to the Needs of the LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP053, pp. XX-XX.
[n] J. D. Sherman et al., “Development and Test Results of the Low-Energy Demonstration Accelerator LEDA Proton Injector on a 1.25 MeV CW Radio Frequency Quadrupole”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4054, pp. 890-892.
[n] H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2048-2051.
[n] D. Reggiani et al., “A Macro-Pulsed 1.2 MW Proton Beam for the PSI Ultra Cold Neutron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP086, pp. 1748-1750.
[n] M. Nordby, M. Fong, and J. Hodgson, “Synchrotron Radiation Masking in the PEP-II High-Engery Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2500-2503.
[n] J. C. Collins et al., “Computer Control Strategies at SIN”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-08, pp. 2337-2340.
[n] G. Hemmie, “Status of the DESY II Project”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 851-854.
[n] A-M. Valente-Feliciano et al., “RF and Structural Characterization of New SRF Films”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO084, pp. 431-435.
[n] S. Delchamps et al., “SSC Collider Dipole Magnet End Mechanical Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2185-2188.
[n] A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 358-360. doi:10.18429/JACoW-NAPAC2016-TUPOA36
[n] P. Thieberger et al., “Proposed Scattered Electron Detector System as One of the Beam Overlap Diagnostic Tools for the New RHIC Electron Lens”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP209, pp. 489-491.
For LaTeX
Use Complete Form
For BibTeX
References
- S. A. Kahn and R. C. Gupta, “Radiation Tolerant Multipole Correction Coils for FRIB Quadrupoles”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA25, pp. 1283-1285.
- S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3716-3719.
- G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717.
- P. Krejcik et al., “Experience with the SLAC Controls Architecture Evolving to the Needs of the LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP053, pp. XX-XX.
- J. D. Sherman et al., “Development and Test Results of the Low-Energy Demonstration Accelerator LEDA Proton Injector on a 1.25 MeV CW Radio Frequency Quadrupole”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4054, pp. 890-892.
- H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2048-2051.
- D. Reggiani et al., “A Macro-Pulsed 1.2 MW Proton Beam for the PSI Ultra Cold Neutron Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP086, pp. 1748-1750.
- M. Nordby, M. Fong, and J. Hodgson, “Synchrotron Radiation Masking in the PEP-II High-Engery Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2500-2503.
- J. C. Collins et al., “Computer Control Strategies at SIN”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-08, pp. 2337-2340.
- G. Hemmie, “Status of the DESY II Project”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 851-854.
- A-M. Valente-Feliciano et al., “RF and Structural Characterization of New SRF Films”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO084, pp. 431-435.
- S. Delchamps et al., “SSC Collider Dipole Magnet End Mechanical Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2185-2188.
- A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 358-360.
- P. Thieberger et al., “Proposed Scattered Electron Detector System as One of the Beam Overlap Diagnostic Tools for the New RHIC Electron Lens”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP209, pp. 489-491.
Back to search