JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 363-366. doi:10.18429/JACoW-LINAC2024-TUPB019
[n]	R. J. Nawrocky, R. F. Frankel, and M. G. Thomas, “Magnet Power Supply for ISABELLE”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4075-4078. 
[n]	R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1893-1896. 
[n]	M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4912-4915. doi:10.18429/JACoW-IPAC2023-THPM010
[n]	N. Milleron, “Some Recent Developments in Vacuum Techniques for Acclerators and Storage Rings”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 794-804. 
[n]	I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 329-332. doi:10.18429/JACoW-ICALEPCS1991-S08NC11
[n]	H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 758-761. 
[n]	M. Neubauer, J. Wessel, M. Popovic, R. Lentz, T. Blassick, and T. Wynn, “An input port for a high-power magnetron”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR31, unpublished. 
[n]	E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC45, unpublished. 
[n]	H. Halama, “Ion Clearing and Photoelectron Production in the 200 MeV SXLS ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2313-2316. 
[n]	D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48. 
[n]	T. Schmidt et al., “Magnetic Design of an Apple III Undulator for SwissFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP043, pp. 116-120. 
[n]	I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2910-2913. doi:10.18429/JACoW-IPAC2017-WEPIK002
[n]	A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 233-237. 
[n]	G. R. White et al., “The EPICS Software Framework Moves from Controls to Physics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1216-1218. doi:10.18429/JACoW-IPAC2019-TUZZPLM3
[n]	F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA056, pp. 801-803. 
[n]	I. Jirousek et al., “The Concept of the PROSCAN Patient Safety System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH215, pp. XX-XX. 
[n]	N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX. 
[n]	G. Penco et al., “Beam Optics Measurements at FERMI by using Wire-Scanner”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 101-104. doi:10.18429/JACoW-FEL2015-MOP034
[n]	M. Okamura, “Laser-Based Heavy Ion Production”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TU2002, pp. 219-221. 
[n]	A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2540-2543. doi:10.18429/JACoW-IPAC2021-WEXB05
[n]	J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1655-1659. 
[n]	M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136. 
[n]	S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 345. doi:10.18429/JACoW-MEDSI2020-THOA02
[n]	R. Damm, A. Otis, and V. LoGrasso, “Quadrupole Focusing System for the 200 MeV Linac”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-7, pp. 561-577. 
[n]	J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580. 
[n]	M. Lieuvin, “SARA - Grenoble Status Report”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABC-06, pp. 81-88. 
[n]	M. Canzari et al., “A Technology Downselection for SKA User Interface Generator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1006. doi:10.18429/JACoW-ICALEPCS2019-WEMPL005
[n]	A. Hofmann and K. W. Robinson, “Measurement of Cross Section of a High-Energy Electron Beam by Means of the X-Ray Portion of the Synchrotron Radiation”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 937-939. 
[n]	G. G. Oksuzyan, E. D. Gazazyan, M. Ivanyan, A. T. Margaryan, and A. D. Ter-Poghosyan, “Ultra-high Frequency Scanning Cavities for Non-relativistic Electron Beam”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT005, pp. 2466-2468. 
[n]	J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96. 
[n]	S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583. 
[n]	T. Hiatt et al., “Cryogenic Testing of the RF Input Waveguide for the CEBAF Upgrade Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH158, pp. 1155-1157. 
[n]	J.-C. Denard, P. Piot, K. Capek, and E. Feldl, “High Power Beam Profile Monitor with Optical Transition Radiation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P062, pp. 2198-2200. 
[n]	K. Hanke et al., “Status of the Linac4 Project at CERN”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD015, pp. 702-704. 
[n]	T. Tominaka, M. Okamura, and T. Katayama, “Analytical Field Calculation of Helical Dipole Magnets for RHIC Snake”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P018, pp. 3437-3439. 
[n]	I. N. Birukov, V. A. Moiseev, and P. N. Ostroumov, “Analysis of the Closed Orbit Distortions in the MMF Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1447-1449. 
[n]	L. Harwood, G. Biallas, A. Guerra, W. Heilbrunn, and J. Karn, “Magnet Design and Performance for the CEBAF Beam Transport System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1350-1353. 
[n]	A. Latina et al., “CompactLight Design Study”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 85-88. doi:10.18429/JACoW-FLS2018-WEP1WC02
[n]	P. Kneisel and B. Lewis, “Advanced Surface Cleaning Methods - Three Years of Experience with High Pressure Ultrapure Water Rinsing of Superconducting Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95L02, pp. 311-327. 
[n]	T. L. Lavine et al., “Binary RF Pulse Compression Experiment at SLAC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 940-943. 
[n]	W. Ebeling, “The Transverse Feedback System in DESY”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2285-2287. 
[n]	J. Serrano, P. ?ülvarez, D. Dom?¡nguez, and J. Lewis, “Nanosecond Level UTC Timing Generation and Stamping in CERN's LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP533, pp. XX-XX. 
[n]	W. Jule, R. Chasman, and R. L. Gluckstern, “Band Closing in an Alvarez Type Periodic Structure”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-9, pp. 343-351. 
[n]	J. N. Weaver, J. B. Styles, and P. B. Wilson, “Bench Measurements of the Loss Impedance for PEP Beam Line Components”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3971-3974. 
[n]	J. Schuchman et al., “SXLS Phase II Vacuum System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2316-2319. 
[n]	L. Felsberger, A. Apollonio, T. Cartier-Michaud, E. Montesinos, J. C. Oliveira, and J. A. Uythoven, “Availability Modeling of the Solid-State Power Amplifiers for the CERN SPS RF Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2308-2311. doi:10.18429/JACoW-IPAC2021-TUPAB345
[n]	K. Batchelor et al., “Operational Experience on the Brookhaven National Laboratory Accelerator Test Facility”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 736-739. 
[n]	P. Piot et al., “A Multislit Transverse-Emittance Diagnostic for Space-Charge-Dominated Electron Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P064, pp. 2204-2206. 
[n]	C. Jamet et al., “Beam Diagnostic Overview of the SPIRAL2 RNB Section”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD06, pp. 314-316. 
[n]	L. Maunoury et al., “Multigan?«: a New Multicharged Ion Source Based on Axisymetric Magnetic Structure”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOCK05, pp. 37-39. 
[n]	W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1216-1219. 
[n]	R. Lambiase, “Overview of the Power Conversion Systems for the RHIC Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP004G, pp. 2311-2313. 
[n]	S. P. Kearney, S. Chen, B. Lai, J. Maser, T. Mooney, and D. Shu, “Mechanical Design Progress of the In Situ Nanoprobe Instrument for APS-U”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 71. doi:10.18429/JACoW-MEDSI2020-MOPC10
[n]	J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 479-482. 
[n]	C. Courtois et al., “Intensity Control in GANIL's Experimental Rooms”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF31, pp. 587-589. 
[n]	P. Musumeci et al., “Status of the SPARC Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH029, pp. 110-112. 
[n]	R. J. England, M. J. Hogan, J. B. Rosenzweig, and G. Travish, “Longitudinal Shaping of Electron Bunches with Applications to the Plasma Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH3GBI02, pp. 3105-3105. 
[n]	D. A. Gray, “The Operational Experience with Nimrod”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 743-749. 
[n]	G. Danby et al., “Unicell Structure for Superconducting Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1614-1617. 
[n]	P. Robillard et al., “RF Power Tests and Results of the First Rebuncher for the SPIRAL 2 Driver”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP051, pp. 172-174. 
[n]	C. M. Fortgang, L. B. Dauelsberg, C. Geisik, D. Liska, and R. E. Shafer, “Pulsed Taut-Wire Alignment of Multiple Permanent Magnet Quadrupoles”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU444, pp. 426-428. 
[n]	C. A. Ludemann, J. M. Domaschko, K. Hagemann, and S. W. Mosko, “Computer Control of the Oak Ridge Isochronous Cyclotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 618-621. 
[n]	T. Giacomini, P. Forck, J. G. De Villiers, J. Dietrich, and D. A. Liakin, “Ionization Profile Monitors - IPM @ GSI”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD51, pp. 419-421. 
[n]	I. Ben-Zvi, J. F. Crawford, and J. P. Turneaure, “Electron Multiplication in Cavities”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 54-59. 
[n]	A. Al-Dalleh, A. Ismail, and I. Saleh, “Structure and Development of SESAME's Control System Clients”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1865-1868. doi:10.18429/JACoW-ICALEPCS2017-THPHA183
[n]	G. Marot and R. Bennett, “The Design of Photon Absorbers for the ESRF Vacuum Chamber”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1240-1243. 
[n]	R. Hettel et al., “SPEAR-III: A Brighter Source at SSRL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V049, pp. 838-840. 
[n]	M. Killenberg et al., “Drivers and Software for MicroTCA.4”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 725-728. doi:10.18429/JACoW-ICALEPCS2015-WEPGF015
[n]	M. Burns et al., “Cell Design for the DARHT Linear Induction Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2958-2961. 
[n]	M. Wiseman et al., “Jefferson Lab IR FEL Cryomodule Modifications and Test Results”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P035, pp. 3108-3110. 
[n]	T. Bohl et al., “Synchro-betatron Resonances in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1612-1615. 
[n]	S. A. Kahn, H. Guler, C. Lu, K. T. McDonald, E. J. Prebys, and S. E. Vahsen, “The Instrumentation Channel for the MUCOOL Experiment”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP33, pp. 3026-3028. 
[n]	C. A. Ludemann, J. M. Domaschko, and S. W. Mosko, “Computer Control System for ORIC”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 500-510. 
[n]	S. R. Strangis, G. J. Maslat, and T. Y. T. Kuo, “The Cyclotron Radioisotopes Production Facility of the Argentinean Atomic Energy Commission (CNEA)”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-13, pp. XX-XX. 
[n]	F. Micolon et al., “Solder joint cryogenic fatigue of the RHIC 12x150A current leads and mitigation for future operation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1556-1559. doi:10.18429/JACoW-IPAC2024-TUPR56
[n]	A. Morris, B. Muratori, H. Owen, J. Crone, L. Corner, and P. Williams, “Tunable monochromatic gamma ray source design using Inverse Compton Scattering at Daresbury Laboratory”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1260-1262. doi:10.18429/JACoW-IPAC2023-MOPM126
[n]	D. Liska, S. J. Black, J. N. DiMarco, J. Ledford, and G. Spalek, “Design Features of a Seven-Cell High-Gradient Superconducting Cavity”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-43, pp. 163-165. 
[n]	C. D. Ziomek, “Adaptive Feedforward in the LANL RF Control System”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-28, pp. 683-685. 
[n]	L. A. Sarkisyan, “Acceleration of the High-Current Beams of Heavy Ions up to 1-2 GeV/Nucleon in the Ring Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABC-08, pp. 95-97. 
[n]	N. Bongers et al., “Expertsystem for COSY - Control”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1126-1129. 
[n]	R. W. Carey et al., “Status of the use of Large-Scale CORBA Distributed Software Framework for NIF Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O2_001. 
[n]	T. Andr?® et al., “Recent Developments for Beam Intensity Increase Operation”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-38, pp. 290-292. 
[n]	V. P. Voevodin, “Logging Actions of Operators in the IHEP U-70 Accelerator Complex Control System”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB035, pp. 248-250. 
[n]	V. Bharadwaj et al., “Computer Controls Programming for Deceleration Beam in the Fermilab Antiproton Accumulator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 964-967. 
[n]	R. Gobin et al., “High Intensity Beam Production at CEA/Saclay For The IPHI Project”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 83-85. doi:10.18429/JACoW-ECRIS2016-WEPP01
[n]	S. Sierra, C. Lievin, P. Rouillon, H. Guler, W. Kaabi, and A. Verguet, “Automatic RF Conditioning Test Bench of Fundamental Power Couplers for the European XFEL Accelerator”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB095, pp. 1367-1369. 
[n]	A. Febel, H. Gerke, M. Tigner, H. Wiedemann, and B. H. Wilk, “The Proposed Desy Proton-Electron Colliding Beam Experiment”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 782-786. 
[n]	Y. Yang et al., “Charge-Exchange Factor in EBIT Spectral Analysis”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR2WH03, unpublished. 
[n]	G. S?®n?®cal et al., “GANIL High Intensity Transport Safety System”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-04, pp. 291-293. 
[n]	P. Aeschimann, L. Besse, and I. Jirousek, “Therapy Controller Designed for Patient Irradiation at the SIN --Applicator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-15, pp. 2277-2280. 
[n]	R. D. Hay and H. Winick, “Experience with Metal and Epoxy Vacuum Chambers and the Development of Alumina Ceramic Vacuum Chambers at the CEA”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 815-821. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search