Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Höfle et al., “Recommissioning of the CERN AD Stochastic Cooling System in 2021 after Long Shutdown 2”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper S302, pp. 20-25.
[n] L. Perrot, P. Blache, and S. Rousselot, “The DESIR Facility at GANIL-SPIRAL2: The Transfer Beam Lines”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 179-183. doi:10.18429/JACoW-HB2016-MOPL002
[n] L. H. Yu, J. Galayda, and R. J. Nawrocky, “Studies of Positional Stability of the Electron Beam in the NSLS Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3394-3397.
[n] A. Alexander et al., “High gradient RF photoinjector at LANL”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2916-2921. doi:10.18429/JACoW-IPAC2024-THXN1
[n] A. Y. Molodozhentsev and M. Tomizawa, “Study of Particle Losses Mechanism for J-PARC Main Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH013, pp. 2811-2813.
[n] O. Belikov, V. Kozak, and A. Medvedko, “FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDERS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU03, pp. XX-XX.
[n] C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4063-4065. doi:10.18429/JACoW-IPAC2019-THPRB100
[n] P. Cameron et al., “The RHIC Ionization Beam Profile Monitor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA101, pp. 2114-2116.
[n] P. E. Oettinger, I. Bursuc, E. Pugh, and R. E. Shefer, “Brightness of an Intense Electron Beam Generated by a Pulse-Laser Irradiated Photocathode”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 286-289.
[n] D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX.
[n] G. Ha, A. Halavanau, G. Andonian, J. Rosenzweig, and J. Power, “Simulation study for nanometer-scale modulation transfer in emittance exchange beamline”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 376-379. doi:10.18429/JACoW-IPAC2024-MOPG37
[n] S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
[n] E. Forest, H. Nishimura, D. S. Robin, Y. Wu, and A. A. Zholents, “Mini-Beta Lattice for the Femto-Second X-Ray Source at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A17, pp. 1098-1100.
[n] P. N. Prakash, A. Roy, and K. W. Shepard, “Quarter Wave Coaxial Line Cavity for New Delhi Linac Booster”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C25, pp. 633-639.
[n] D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 414-418.
[n] O. Felden, R. Gebel, K. Grigoryev, V. Kamerdzhiev, and Y. Valdau, “JULIC - Driver Accelerator for HBS”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO005, pp. 303-306. doi:10.18429/JACoW-CYCLOTRONS2022-THPO005
[n] N. Mityanina, “The Code MBIM1 for the Calculation of the Multibunch Beams Coherent Oscillations Stability (in Approach of Short Bunches)”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP028, pp. 2009-2011.
[n] G. Krafczyk, G. Dugan, M. Harrison, K. Koepke, and E. Tilles, “Abort Kicker Power Supply Systems at Fermilab”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3581-3584.
[n] R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
[n] L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n] A. C. Mezger, D. Anicic, M. Gasche, T. Korhonen, and H. Lutz, “Upgrading the PROSCAN Control System to EPICS: A Success Story”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP032, pp. 733-735.
[n] A. P. Sumbaev, V. I. Shokin, and N. I. Tarantin, “The Magnetic Energy Analyzer for Electron Beam Of LUE-200 Linac of IREN Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 647-649. doi:10.18429/JACoW-RUPAC2016-THPSC051
[n] J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
[n] A. Neumann et al., “CW Measurements of Cornell LLRF System at HoBiCaT”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO067, pp. 262-266.
[n] L. M. Bollinger et al., “Status of the Uranium Upgrade of ATLAS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2987-2990.
[n] G. Z. Georgiev et al., “Beam Preparation with Temporally Modulated Photocathode Laser Pulses for a Seeded THz FEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2866-2869. doi:10.18429/JACoW-IPAC2021-WEPAB115
[n] Y. Ivanyushenkov et al., “Conceptual Design of a Novel SCAPE Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1596-1598. doi:10.18429/JACoW-IPAC2017-TUPAB117
[n] R. J. Bakker et al., “Fast and Flexible BPM-System: Valuable Commissioning Tool for the BESSY II”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP29G, pp. 1482-1484.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Höfle et al., “Recommissioning of the CERN AD Stochastic Cooling System in 2021 after Long Shutdown 2”, in Proc. 13th Workshop on Beam Cooling and Related Topics (COOL'21), Novosibirsk, Russia, Nov. 2021, paper S302, pp. 20-25.
- L. Perrot, P. Blache, and S. Rousselot, “The DESIR Facility at GANIL-SPIRAL2: The Transfer Beam Lines”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 179-183.
- L. H. Yu, J. Galayda, and R. J. Nawrocky, “Studies of Positional Stability of the Electron Beam in the NSLS Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3394-3397.
- A. Alexander et al., “High gradient RF photoinjector at LANL”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THXN1, pp. 2916-2921.
- A. Y. Molodozhentsev and M. Tomizawa, “Study of Particle Losses Mechanism for J-PARC Main Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH013, pp. 2811-2813.
- O. Belikov, V. Kozak, and A. Medvedko, “FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDERS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU03, pp. XX-XX.
- C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4063-4065.
- P. Cameron et al., “The RHIC Ionization Beam Profile Monitor”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA101, pp. 2114-2116.
- P. E. Oettinger, I. Bursuc, E. Pugh, and R. E. Shefer, “Brightness of an Intense Electron Beam Generated by a Pulse-Laser Irradiated Photocathode”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 286-289.
- D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX.
- G. Ha, A. Halavanau, G. Andonian, J. Rosenzweig, and J. Power, “Simulation study for nanometer-scale modulation transfer in emittance exchange beamline”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG37, pp. 376-379.
- S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
- E. Forest, H. Nishimura, D. S. Robin, Y. Wu, and A. A. Zholents, “Mini-Beta Lattice for the Femto-Second X-Ray Source at the ALS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A17, pp. 1098-1100.
- P. N. Prakash, A. Roy, and K. W. Shepard, “Quarter Wave Coaxial Line Cavity for New Delhi Linac Booster”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C25, pp. 633-639.
- D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 414-418.
- O. Felden, R. Gebel, K. Grigoryev, V. Kamerdzhiev, and Y. Valdau, “JULIC - Driver Accelerator for HBS”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THPO005, pp. 303-306.
- N. Mityanina, “The Code MBIM1 for the Calculation of the Multibunch Beams Coherent Oscillations Stability (in Approach of Short Bunches)”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP028, pp. 2009-2011.
- G. Krafczyk, G. Dugan, M. Harrison, K. Koepke, and E. Tilles, “Abort Kicker Power Supply Systems at Fermilab”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3581-3584.
- R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
- L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3887-3889.
- A. C. Mezger, D. Anicic, M. Gasche, T. Korhonen, and H. Lutz, “Upgrading the PROSCAN Control System to EPICS: A Success Story”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP032, pp. 733-735.
- A. P. Sumbaev, V. I. Shokin, and N. I. Tarantin, “The Magnetic Energy Analyzer for Electron Beam Of LUE-200 Linac of IREN Facility”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 647-649.
- J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
- A. Neumann et al., “CW Measurements of Cornell LLRF System at HoBiCaT”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO067, pp. 262-266.
- L. M. Bollinger et al., “Status of the Uranium Upgrade of ATLAS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2987-2990.
- G. Z. Georgiev et al., “Beam Preparation with Temporally Modulated Photocathode Laser Pulses for a Seeded THz FEL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2866-2869.
- Y. Ivanyushenkov et al., “Conceptual Design of a Novel SCAPE Undulator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1596-1598.
- R. J. Bakker et al., “Fast and Flexible BPM-System: Valuable Commissioning Tool for the BESSY II”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP29G, pp. 1482-1484.
Back to search