Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Korenev, “Critical Analysis of Negative Hydrogen Ion Sources for Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT018, pp. 192-194.
[n] E. Bulyak, “Ion Core Parameters in the Bending Magnets of Electron Storage Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPA12, pp. 3223-3225.
[n] G. Andonian et al., “Beam profile monitor using thin gas sheets”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS111, unpublished.
[n] J. Branlard et al., “New LLRF System for Fermilab 201.25 MHz Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP114, pp. 1066-1068.
[n] F. M. Velotti et al., “CERN SPS Dilution Kicker Vacuum Pressure Behaviour under Unprecedented Beam Brightness”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 447-450. doi:10.18429/JACoW-HB2023-THBP05
[n] N. Elias et al., “State-of-the-art cryogenics process control for the operation of the ESS superconducting linac”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3086-3089. doi:10.18429/JACoW-IPAC2025-THPS054
[n] M. Kilpatrick, J. Edelen, J. Einstein-Curtis, R. O'Rourke, K. Drees, and M. Valette, “Prediction of superconducting magnet quenches with machine learning”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2889-2891. doi:10.18429/JACoW-IPAC2023-WEPA104
[n] A. Mishin, “Status of ABC production line at Varex Imaging Corporation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3687-3689. doi:10.18429/JACoW-IPAC2024-THPR73
[n] Z. M. Dai, G. M. Liu, and N. Huang, “THE SSRF STORAGE RING MAGNET LATTICE DESIGN”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THDM01, pp. XX-XX.
[n] G. Gaitan et al., “Development of a CVD System for Next-Generation SRF Cavities”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 372-374. doi:10.18429/JACoW-NAPAC2022-TUPA15
[n] G. Hahn and J. G. Hwang, “Development of a Precision Pepper-Pot Emittance Meter”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 369-372. doi:10.18429/JACoW-IBIC2019-TUPP027
[n] J. Q. Li, Q. S. Chen, K. Fan, K. Tang, and P. Tian, “Design and Simulation of a Cavity BPM for HUST Proton Therapy Facility”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 530-533. doi:10.18429/JACoW-IBIC2019-WEPP010
[n] G. M. Liu, N. Yang, and N. Huang, “COLLECTIVE EFFECTS IN SSRF”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP050, pp. XX-XX.
[n] A. Latina et al., “A Compact Inverse Compton Scattering Source Based on X-band Technology and Cavity-enhanced High Average Power Ultrafast Lasers”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 257-260. doi:10.18429/JACoW-FLS2023-TH4A2
[n] E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2781-2784. doi:10.18429/JACoW-IPAC2023-WEPA054
[n] J. Biernat, “Modern electron beam diagnostic techniques based on LOCO and feed forward artificial neural networks.”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC59, unpublished.
[n] M. Boege, A. Streun, and M. Munoz, “Studies on Imperfections in the SLS Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP30, pp. 1542-1544.
[n] J. Pham et al., “Standardizing MicroTCA integration into the TANGO control system via ChimeraTK and OPC UA at SOLEIL”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 724-728. doi:10.18429/JACoW-ICALEPCS2025-TUPD099
[n] V. I. Pershin et al., “Metal-Vapor Vacuum-Arc Ion Source with An Additional Anode”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH434, pp. 677-679.
[n] M. Boege and A. Streun, “Beam Lifetime Studies for the SLS Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP71, pp. 2430-2432.
[n] M. Slupecki, “Future challenges for CERN’s ion injector complex”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 68-73. doi:10.18429/JACoW-HIAT2025-TUX01
[n] Z. Martí, G. Benedetti, M. Carlà, and U. Iriso, “ALBA beam lifetime optimization using RCDS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3101-3103. doi:10.18429/JACoW-IPAC2023-WEPL002
[n] J. Aishima, A. Ashton, S. Fisher, K. Levik, and G. Winter, “Monitoring and Cataloguing the Progress of Synchrotron Experiments, Data Reduction, and Data Analysis at Diamond Light Source From a User's Perspective”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 822-825. doi:10.18429/JACoW-ICALEPCS2015-WEPGF053
[n] I. Guk et al., “The Storage Ring for Low Energy Tritons and Its Possible Application”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH069, pp. 3386-3388.
[n] S. Proskin and A. Kulago, “Maximum Value of the Standing Wave and Travelling Wave Accelerating Structures Electronic Efficiency”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC004, pp. 453-455.
[n] B. Leblond, C. Travier, P. Georges, and P. Thomas, “CANDELA Photo-injector: The Drive Laser”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3053-3055.
[n] Y. A. Svistunov et al., “Test Results of 433 MHz Deuteron Linac (RFQ)”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB11, pp. 177-179.
[n] I. Khokhriakov and F. Wilde, “Worry-free Experimental Metadata collection tool for Tango-Controls/TINE and HDF5”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD099, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Korenev, “Critical Analysis of Negative Hydrogen Ion Sources for Cyclotrons”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT018, pp. 192-194.
- E. Bulyak, “Ion Core Parameters in the Bending Magnets of Electron Storage Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPA12, pp. 3223-3225.
- G. Andonian et al., “Beam profile monitor using thin gas sheets”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS111, unpublished.
- J. Branlard et al., “New LLRF System for Fermilab 201.25 MHz Linac”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP114, pp. 1066-1068.
- F. M. Velotti et al., “CERN SPS Dilution Kicker Vacuum Pressure Behaviour under Unprecedented Beam Brightness”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP05, pp. 447-450.
- N. Elias et al., “State-of-the-art cryogenics process control for the operation of the ESS superconducting linac”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS054, pp. 3086-3089.
- M. Kilpatrick, J. Edelen, J. Einstein-Curtis, R. O'Rourke, K. Drees, and M. Valette, “Prediction of superconducting magnet quenches with machine learning”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA104, pp. 2889-2891.
- A. Mishin, “Status of ABC production line at Varex Imaging Corporation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR73, pp. 3687-3689.
- Z. M. Dai, G. M. Liu, and N. Huang, “THE SSRF STORAGE RING MAGNET LATTICE DESIGN”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THDM01, pp. XX-XX.
- G. Gaitan et al., “Development of a CVD System for Next-Generation SRF Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 372-374.
- G. Hahn and J. G. Hwang, “Development of a Precision Pepper-Pot Emittance Meter”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 369-372.
- J. Q. Li, Q. S. Chen, K. Fan, K. Tang, and P. Tian, “Design and Simulation of a Cavity BPM for HUST Proton Therapy Facility”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 530-533.
- G. M. Liu, N. Yang, and N. Huang, “COLLECTIVE EFFECTS IN SSRF”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP050, pp. XX-XX.
- A. Latina et al., “A Compact Inverse Compton Scattering Source Based on X-band Technology and Cavity-enhanced High Average Power Ultrafast Lasers”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH4A2, pp. 257-260.
- E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA054, pp. 2781-2784.
- J. Biernat, “Modern electron beam diagnostic techniques based on LOCO and feed forward artificial neural networks.”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC59, unpublished.
- M. Boege, A. Streun, and M. Munoz, “Studies on Imperfections in the SLS Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP30, pp. 1542-1544.
- J. Pham et al., “Standardizing MicroTCA integration into the TANGO control system via ChimeraTK and OPC UA at SOLEIL”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 724-728.
- V. I. Pershin et al., “Metal-Vapor Vacuum-Arc Ion Source with An Additional Anode”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH434, pp. 677-679.
- M. Boege and A. Streun, “Beam Lifetime Studies for the SLS Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP71, pp. 2430-2432.
- M. Slupecki, “Future challenges for CERN’s ion injector complex”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUX01, pp. 68-73.
- Z. Martí, G. Benedetti, M. Carlà, and U. Iriso, “ALBA beam lifetime optimization using RCDS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL002, pp. 3101-3103.
- J. Aishima, A. Ashton, S. Fisher, K. Levik, and G. Winter, “Monitoring and Cataloguing the Progress of Synchrotron Experiments, Data Reduction, and Data Analysis at Diamond Light Source From a User's Perspective”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 822-825.
- I. Guk et al., “The Storage Ring for Low Energy Tritons and Its Possible Application”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH069, pp. 3386-3388.
- S. Proskin and A. Kulago, “Maximum Value of the Standing Wave and Travelling Wave Accelerating Structures Electronic Efficiency”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC004, pp. 453-455.
- B. Leblond, C. Travier, P. Georges, and P. Thomas, “CANDELA Photo-injector: The Drive Laser”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3053-3055.
- Y. A. Svistunov et al., “Test Results of 433 MHz Deuteron Linac (RFQ)”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB11, pp. 177-179.
- I. Khokhriakov and F. Wilde, “Worry-free Experimental Metadata collection tool for Tango-Controls/TINE and HDF5”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD099, unpublished.
Back to search