Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Gardner and L. Ahrens, “A Method for Determining the Position, Angle and Other Injection Parameters of a Short Pulsed Beam in the Brookhaven AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1888-1891.
[n] E. Meier, G. LeBlanc, and Y. E. Tan, “Orbit Correction Studies using Neural Networks”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP057, pp. 2837-2839.
[n] J. R. Hunt, F. Cerutti, L. S. Esposito, M. Giovannozzi, A. Huschauer, and G. Russo, “Transverse Beam Profile Measurements from Extraction Losses in the PS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2548-2551. doi:10.18429/JACoW-IPAC2021-WEXB07
[n] A. Sessler, E. Henestroza, and S. Yu, “Ion Motion in the Adiabatic Focuser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH101, pp. 2149-2151.
[n] R. Johnson, S. Smith, N. Kurita, K. Kishiyama, and J. Hinkson, “Calibration of the Beam-Position Monitor System for the SLAC PEP-II B Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P083, pp. 2110-2112.
[n] G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
[n] V. Baglin, I. R. Collins, O. Gr?Âbner, C. Gr??nhagel, and B. Jenninger, “Cryosorber Studies for the LHC Long Straight Section Beam Screens with COLDEX”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO010, pp. 2538-2540.
[n] T. Torims et al., “Perspectives and recent achievements on additive manufacturing technologies for accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3890-3892. doi:10.18429/JACoW-IPAC2024-THPS62
[n] R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1893-1896.
[n] B. Krietenstein, K. Ko, T. Lee, U. Becker, T. Weiland, and M. Dohlus, “Spurious Oscillations in High Power Klystrons”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ06, pp. 1533-1535.
[n] G. Decker, J. Galayda, S. Krinsky, and L. Solomon, “Experience with Phase II Insertion Devices in the X-Ray Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 470-473.
[n] C. Kim, J. H. Hong, H.-S. Kang, I. S. Ko, S. J. Lee, and D. C. Shin, “Stripline Beam Position Monitor for the PAL-XFEL”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 274-277. doi:10.18429/JACoW-IBIC2017-TUPCF26
[n] C. Sibley, A. Jones, D. Thompson, and E. Bjorklund, “Implementation and Integration of the SNS Timing and Machine Protection Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP546, pp. XX-XX.
[n] V. V. Danilov, S. Henderson, A. Burov, and V. Lebedev, “An Improved Impedance Model of Metallic Coatings”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI117, pp. 1464-1466.
[n] H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 758-761.
[n] R. Akre, P. Krejcik, and V. Bharadwaj, “SLAC Linac RF Performance for LCLS”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THC11, pp. 881-883.
[n] A. L. Allen et al., “Measurements of Reduced Corkscrew Motion on the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3094-3097.
[n] P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
[n] S. A. Martin et al., “COSY-A Cooler Synchrotron and Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2694-2697.
[n] D. R. Bett et al., “A Sub-Micron Resolution, Bunch-by-Bunch Beam Trajectory Feedback System and Its Application to Reducing Wakefield Effects in Single-Pass Beamlines”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1382-1385. doi:10.18429/JACoW-IPAC2021-TUPAB020
For LaTeX
Use Complete Form
For BibTeX
References
- C. Gardner and L. Ahrens, “A Method for Determining the Position, Angle and Other Injection Parameters of a Short Pulsed Beam in the Brookhaven AGS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1888-1891.
- E. Meier, G. LeBlanc, and Y. E. Tan, “Orbit Correction Studies using Neural Networks”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP057, pp. 2837-2839.
- J. R. Hunt, F. Cerutti, L. S. Esposito, M. Giovannozzi, A. Huschauer, and G. Russo, “Transverse Beam Profile Measurements from Extraction Losses in the PS”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2548-2551.
- A. Sessler, E. Henestroza, and S. Yu, “Ion Motion in the Adiabatic Focuser”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH101, pp. 2149-2151.
- R. Johnson, S. Smith, N. Kurita, K. Kishiyama, and J. Hinkson, “Calibration of the Beam-Position Monitor System for the SLAC PEP-II B Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P083, pp. 2110-2112.
- G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
- V. Baglin, I. R. Collins, O. Gr?Âbner, C. Gr??nhagel, and B. Jenninger, “Cryosorber Studies for the LHC Long Straight Section Beam Screens with COLDEX”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO010, pp. 2538-2540.
- T. Torims et al., “Perspectives and recent achievements on additive manufacturing technologies for accelerators”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS62, pp. 3890-3892.
- R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1893-1896.
- B. Krietenstein, K. Ko, T. Lee, U. Becker, T. Weiland, and M. Dohlus, “Spurious Oscillations in High Power Klystrons”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ06, pp. 1533-1535.
- G. Decker, J. Galayda, S. Krinsky, and L. Solomon, “Experience with Phase II Insertion Devices in the X-Ray Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 470-473.
- C. Kim, J. H. Hong, H.-S. Kang, I. S. Ko, S. J. Lee, and D. C. Shin, “Stripline Beam Position Monitor for the PAL-XFEL”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 274-277.
- C. Sibley, A. Jones, D. Thompson, and E. Bjorklund, “Implementation and Integration of the SNS Timing and Machine Protection Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP546, pp. XX-XX.
- V. V. Danilov, S. Henderson, A. Burov, and V. Lebedev, “An Improved Impedance Model of Metallic Coatings”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI117, pp. 1464-1466.
- H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 758-761.
- R. Akre, P. Krejcik, and V. Bharadwaj, “SLAC Linac RF Performance for LCLS”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THC11, pp. 881-883.
- A. L. Allen et al., “Measurements of Reduced Corkscrew Motion on the ETA-II Linear Induction Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3094-3097.
- P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
- S. A. Martin et al., “COSY-A Cooler Synchrotron and Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2694-2697.
- D. R. Bett et al., “A Sub-Micron Resolution, Bunch-by-Bunch Beam Trajectory Feedback System and Its Application to Reducing Wakefield Effects in Single-Pass Beamlines”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1382-1385.
Back to search