Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
[n] M. Anerella et al., “Superconducting Magnets for use inside the HERA ep Interaction Regions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUOA02A, pp. 308-310.
[n] M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2520-2523.
[n] M. Neubauer, K. Fant, J. Hodgson, J. Judkins, H. Schwarz, and R. A. Rimmer, “High-Power RF Window and Coupler Develoment for the PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR08, pp. 1803-1805.
[n] T. J. P. Ellison, M. S. Ball, and B. J. Hamilton, “Betatron Ping" Tune Measurement System for the IUCF Cooler Synchrotron/Storage Ring"”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2243-2246.
[n] P. Bellomo, T. Jackson, and D. Shimer, “Progress on PEP-II Magnet Power Conversion System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP090G, pp. 2346-2348.
[n] T. Furuya, “Preparation and Handling of Superconducting RF Cavities”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89D02, pp. XX-XX.
[n] D. L. Friesel, M. Ball, T. J. P. Ellison, and T. Sloan, “Multiple Beam Operations at IUCF”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-02, pp. 380-383.
[n] M. Ball et al., “Phase Modulation Induced Particle Diffusion”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP11C, pp. 1256-1258.
[n] G. Hoffstaetter et al., “Progress Toward an ERL Extension to CESR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOOBAB02, pp. 107-109.
[n] U. Klein, A. Palussek, M. Peiniger, H. Piel, and H. Vogel, “Fabrication and Test of Superconducting RF Cavities for CEBAF”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1309-1312.
[n] W.-D. M?Âller et al., “RF Superconductivity at DESY”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89A05, pp. XX-XX.
[n] G. Gross, R. Cassel, and T. Mattison, “Development of Epoxy Potting for High Voltage Insulation at SLAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2334-2337.
[n] M. H. Chun et al., “Cure of Coupled Bunch Instabilities in PLS Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A02, pp. 1130-1132.
[n] T. Sloan, O. Dermois, and M. Yurko, “Fabrication and Magnetic Field Measurements of the IUCF Cooler Ring Dipole Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1443-1446.
[n] P. J. Moffa, A. D. Bacher, W. P. Jones, and P. Schwandt, “Resonant Depolarization Effects for Polarized Beams in the Indiana University Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 379-384.
[n] C. J. Sharp et al., “CERN Linac4 Chopper Dump: Operational Experience and Future Upgrades”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1370-1373. doi:10.18429/JACoW-IPAC2022-TUPOTK063
[n] T. Jackson, “Design and Performance of PEP DC Power Systems”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2737-2742.
[n] E. Hoyer et al., “The Beam Line X Nd Fe-Steel Hybrid Wiggler for SSRL”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1508-1511.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
- M. Anerella et al., “Superconducting Magnets for use inside the HERA ep Interaction Regions”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUOA02A, pp. 308-310.
- M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2520-2523.
- M. Neubauer, K. Fant, J. Hodgson, J. Judkins, H. Schwarz, and R. A. Rimmer, “High-Power RF Window and Coupler Develoment for the PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR08, pp. 1803-1805.
- T. J. P. Ellison, M. S. Ball, and B. J. Hamilton, “Betatron Ping" Tune Measurement System for the IUCF Cooler Synchrotron/Storage Ring"”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2243-2246.
- P. Bellomo, T. Jackson, and D. Shimer, “Progress on PEP-II Magnet Power Conversion System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP090G, pp. 2346-2348.
- T. Furuya, “Preparation and Handling of Superconducting RF Cavities”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89D02, pp. XX-XX.
- D. L. Friesel, M. Ball, T. J. P. Ellison, and T. Sloan, “Multiple Beam Operations at IUCF”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F7-02, pp. 380-383.
- M. Ball et al., “Phase Modulation Induced Particle Diffusion”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP11C, pp. 1256-1258.
- G. Hoffstaetter et al., “Progress Toward an ERL Extension to CESR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOOBAB02, pp. 107-109.
- U. Klein, A. Palussek, M. Peiniger, H. Piel, and H. Vogel, “Fabrication and Test of Superconducting RF Cavities for CEBAF”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1309-1312.
- W.-D. M?Âller et al., “RF Superconductivity at DESY”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89A05, pp. XX-XX.
- G. Gross, R. Cassel, and T. Mattison, “Development of Epoxy Potting for High Voltage Insulation at SLAC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2334-2337.
- M. H. Chun et al., “Cure of Coupled Bunch Instabilities in PLS Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A02, pp. 1130-1132.
- T. Sloan, O. Dermois, and M. Yurko, “Fabrication and Magnetic Field Measurements of the IUCF Cooler Ring Dipole Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1443-1446.
- P. J. Moffa, A. D. Bacher, W. P. Jones, and P. Schwandt, “Resonant Depolarization Effects for Polarized Beams in the Indiana University Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 379-384.
- C. J. Sharp et al., “CERN Linac4 Chopper Dump: Operational Experience and Future Upgrades”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1370-1373.
- T. Jackson, “Design and Performance of PEP DC Power Systems”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2737-2742.
- E. Hoyer et al., “The Beam Line X Nd Fe-Steel Hybrid Wiggler for SSRL”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1508-1511.
Back to search