Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Litvinenko et al., “FEL Potential of eRHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP007, pp. 2151-2153.
[n] C. S. Chen et al., “Reduction of Conductive EMI Noise Resulted from the Commercial Power Supply”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD058, pp. 3644-3646.
[n] M. L. Chen et al., “Recent Beam Size Measurement Result Using Synchrotron Radiation Inteferometer in TPS”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 217-220. doi:10.18429/JACoW-IBIC2016-MOPG63
[n] I. Syratchev et al., “High-Power Testing of X-Band CLIC Power Generating Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3RAC02, pp. 1873-1875.
[n] D. Krischel, J. Boeer, H. Fechteler, and F. Sommer, “Industrial Fabrication of the Superconducting HERA Quadrupole coil”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1208-1211.
[n] I. Syratchev and A. Cappelletti, “A New High-power RF Device to Vary the Output Power of CLIC Power Extraction and Transfer Structures (PETS)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE026, pp. 3407-3409.
[n] Y.-H. Liu et al., “TPS SR Kicker Prototype Installation Status”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC147, pp. 3230-3232.
[n] M. Dal Forno et al., “High Energy RF Deflectors for the FERMI@Elettra project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI010, pp. 3309-3311.
[n] M. Wiseman, C. K. Sinclair, R. Whitney, M. Zarecky, and R. Vetterlein, “High Power Electron Beam Dumps at CEBAF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P066, pp. 3761-3763.
[n] W. Y. Lai et al., “Alignment Design and Status of Taiwan Photon Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME050, pp. 3043-3045.
[n] K. S. Smith, T. Hayes, and F. Severino, “Concept and Architecture of the RHIC LLRF Upgrade Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOBN5, pp. 1410-1412.
[n] C.-S. Lin et al., “An Application of Multi-stage Adjustable Shock Absorbers for the Girders of Storage Ring in Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD045, pp. 2615-2617.
[n] M. Pont et al., “The Stripline Kicker Prototype for the CLIC Damping Rings at ALBA: Installation, Commissioning and Beam Characterisation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4062-4065. doi:10.18429/JACoW-IPAC2018-THPMF013
[n] J. B. Gonz?â et al., “NCD-SWEET Beamline Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 374-376. doi:10.18429/JACoW-MEDSI2018-THPH17
[n] N. Hiller et al., “Electro-optical Bunch Length Measurements at the ANKA Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME014, pp. 500-502.
[n] S. Di Mitri and E. Karantzoulis, “Betatron Coupling Numerical Study at Elettra”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 264-266. doi:10.18429/JACoW-IPAC2014-MOPRO077
[n] S. V. Kuzikov, A. A. Vikharev, and S. P. Antipov, “Non-Invasive Bunch Length Diagnostics of Sub-Picosecond Beams”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 756-758. doi:10.18429/JACoW-IBIC2016-WEPG50
[n] R. Helm et al., “Recent Improvements in Luminosity at PEP”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2001-2004.
[n] F. Loehl, “Linac Timing, Synchronization, and Active Stabilization”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOAN2, pp. 1381-1385.
[n] M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 179-182. doi:10.18429/JACoW-MEDSI2016-TUPE11
[n] T. Adachi, T. Kawakubo, M. Kihara, C. Ohmori, and I. Yamane, “Beam-Profile Measurement in the KEK-PS Booster Using Pulsed bum Magnets and a Movable Scraper”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1655-1658.
[n] H. J. Qian et al., “Timing Jitter Characterization at the NSLS SDL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP101, pp. 4189-4191.
[n] Y. Mori, “Neutrino Factory in Japan: Based on FFAG Accelerato”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THALA003, pp. 278-280.
[n] H. Eickhoff, “Tests of a Light-ion Gantry Section as an Example of Preparations for the Therapy Facility in Heidelberg”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI093, pp. 2730-2732.
[n] X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 162-164. doi:10.18429/JACoW-MEDSI2016-TUPE05
[n] S. R. Smith, A. Cappelletti, D. Gudkov, L. Soby, and I. Syratchev, “CLIC Drive Beam Position Monitor”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD13, pp. 326-328.
[n] L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-MEDSI2016-MOPE43
[n] X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 165-168. doi:10.18429/JACoW-MEDSI2016-TUPE06
[n] J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
[n] L. M. Bobb, A. F. D. Morgan, and G. Rehm, “Performance Evaluation of Molybdenum Blades in an X-ray Pinhole Camera”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 795-798. doi:10.18429/JACoW-IBIC2016-WEPG63
[n] H. Wei and C. Chen, “Charged-Particle Dynamics in an Adiabatic Thermal Beam Equilibrium”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE097, pp. 4749-4751.
[n] M. Colja et al., “New photon BPM setup using SiC devices in photoconductive mode”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 755-759. doi:10.18429/JACoW-IBIC2025-WEPMO17
[n] M. Belgroune et al., “Status of the ALBA Project”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper POS01, pp. XX-XX.
[n] A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 259. doi:10.18429/JACoW-MEDSI2020-WEPA14
[n] Z. M. Hockenbery, A. A. Kwiatkowski, K. G. Leach, and C. Andreoiu, “In-Trap Decay Spectroscopy Experiments at the TITAN EBIT”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper WE4WH03, unpublished.
[n] J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, and L. Ribo, “Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 211-213. doi:10.18429/JACoW-MEDSI2018-WEPH06
[n] M. Sugitani, “Racetrack Microtron - 150 MeV Injector for Compact SR Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 596-599.
[n] U. Chowdhury et al., “A Cooler Penning Trap to Cool Highly Charged and Short-lived Isotopes at TITAN”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THPM2HA03, pp. 202-205.
[n] R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 230-232. doi:10.18429/JACoW-MEDSI2016-TUPE29
[n] X. J. Wang et al., “Efficiency and Spectrum Enhancement in a Tapered Free-Electron Laser Amplifier”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP053, pp. 1207-1207.
[n] G. Penco, P. Craievich, S. Di Mitri, M. M. Milloch, and F. Rossi, “Time Jitter Measurements in Presence of a Magnetic Chicane in the FERMI@elettra Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB014, pp. 109-111.
[n] H. Wiedemann et al., “The 3 GeV Synchrotron Injector for SPEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2688-2691.
[n] L. F. Bane, “Simulation of Longitudinal Phase Space in the SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1800-1803.
[n] J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “VELA (formerly EBTF) Simulations and First Beam Commissioning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI065, pp. 431-433.
[n] R. Mu?â et al., “Single Bunch Bucket Selection Injection Modes in the ALBA Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2744-2746. doi:10.18429/JACoW-IPAC2017-WEPAB071
[n] Eva Bozoki, “Beam Transport to the SXLS Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2703-2706.
[n] P. Echevarria et al., “Multipurpose Controller Based on a FPGA with EPICS Integration”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOBN4, pp. 1407-1409.
[n] H. Kim, “Commissioning Experiences of the ALS Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2691-2694.
[n] H. Ayvazian, “A New Design for an EMIS-CYCLOTRON System, for Direct Production of Gaseous PET Radioisotopes”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1750-1753.
[n] V. Grattoni and S. Casalbuoni, “Magnetic field errors and possible correction schemes in SCUs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1211-1214. doi:10.18429/JACoW-IPAC2023-MOPM100
For LaTeX
Use Complete Form
For BibTeX
References
- V. Litvinenko et al., “FEL Potential of eRHIC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP007, pp. 2151-2153.
- C. S. Chen et al., “Reduction of Conductive EMI Noise Resulted from the Commercial Power Supply”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD058, pp. 3644-3646.
- M. L. Chen et al., “Recent Beam Size Measurement Result Using Synchrotron Radiation Inteferometer in TPS”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 217-220.
- I. Syratchev et al., “High-Power Testing of X-Band CLIC Power Generating Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3RAC02, pp. 1873-1875.
- D. Krischel, J. Boeer, H. Fechteler, and F. Sommer, “Industrial Fabrication of the Superconducting HERA Quadrupole coil”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1208-1211.
- I. Syratchev and A. Cappelletti, “A New High-power RF Device to Vary the Output Power of CLIC Power Extraction and Transfer Structures (PETS)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE026, pp. 3407-3409.
- Y.-H. Liu et al., “TPS SR Kicker Prototype Installation Status”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC147, pp. 3230-3232.
- M. Dal Forno et al., “High Energy RF Deflectors for the FERMI@Elettra project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI010, pp. 3309-3311.
- M. Wiseman, C. K. Sinclair, R. Whitney, M. Zarecky, and R. Vetterlein, “High Power Electron Beam Dumps at CEBAF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P066, pp. 3761-3763.
- W. Y. Lai et al., “Alignment Design and Status of Taiwan Photon Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME050, pp. 3043-3045.
- K. S. Smith, T. Hayes, and F. Severino, “Concept and Architecture of the RHIC LLRF Upgrade Platform”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOBN5, pp. 1410-1412.
- C.-S. Lin et al., “An Application of Multi-stage Adjustable Shock Absorbers for the Girders of Storage Ring in Taiwan Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD045, pp. 2615-2617.
- M. Pont et al., “The Stripline Kicker Prototype for the CLIC Damping Rings at ALBA: Installation, Commissioning and Beam Characterisation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4062-4065.
- J. B. Gonz?â et al., “NCD-SWEET Beamline Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 374-376.
- N. Hiller et al., “Electro-optical Bunch Length Measurements at the ANKA Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME014, pp. 500-502.
- S. Di Mitri and E. Karantzoulis, “Betatron Coupling Numerical Study at Elettra”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 264-266.
- S. V. Kuzikov, A. A. Vikharev, and S. P. Antipov, “Non-Invasive Bunch Length Diagnostics of Sub-Picosecond Beams”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 756-758.
- R. Helm et al., “Recent Improvements in Luminosity at PEP”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2001-2004.
- F. Loehl, “Linac Timing, Synchronization, and Active Stabilization”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOAN2, pp. 1381-1385.
- M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 179-182.
- T. Adachi, T. Kawakubo, M. Kihara, C. Ohmori, and I. Yamane, “Beam-Profile Measurement in the KEK-PS Booster Using Pulsed bum Magnets and a Movable Scraper”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1655-1658.
- H. J. Qian et al., “Timing Jitter Characterization at the NSLS SDL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP101, pp. 4189-4191.
- Y. Mori, “Neutrino Factory in Japan: Based on FFAG Accelerato”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THALA003, pp. 278-280.
- H. Eickhoff, “Tests of a Light-ion Gantry Section as an Example of Preparations for the Therapy Facility in Heidelberg”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI093, pp. 2730-2732.
- X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 162-164.
- S. R. Smith, A. Cappelletti, D. Gudkov, L. Soby, and I. Syratchev, “CLIC Drive Beam Position Monitor”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD13, pp. 326-328.
- L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 105-107.
- X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 165-168.
- J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
- L. M. Bobb, A. F. D. Morgan, and G. Rehm, “Performance Evaluation of Molybdenum Blades in an X-ray Pinhole Camera”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 795-798.
- H. Wei and C. Chen, “Charged-Particle Dynamics in an Adiabatic Thermal Beam Equilibrium”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE097, pp. 4749-4751.
- M. Colja et al., “New photon BPM setup using SiC devices in photoconductive mode”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 755-759.
- M. Belgroune et al., “Status of the ALBA Project”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper POS01, pp. XX-XX.
- A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 259.
- Z. M. Hockenbery, A. A. Kwiatkowski, K. G. Leach, and C. Andreoiu, “In-Trap Decay Spectroscopy Experiments at the TITAN EBIT”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper WE4WH03, unpublished.
- J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, and L. Ribo, “Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 211-213.
- M. Sugitani, “Racetrack Microtron - 150 MeV Injector for Compact SR Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 596-599.
- U. Chowdhury et al., “A Cooler Penning Trap to Cool Highly Charged and Short-lived Isotopes at TITAN”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper THPM2HA03, pp. 202-205.
- R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 230-232.
- X. J. Wang et al., “Efficiency and Spectrum Enhancement in a Tapered Free-Electron Laser Amplifier”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP053, pp. 1207-1207.
- G. Penco, P. Craievich, S. Di Mitri, M. M. Milloch, and F. Rossi, “Time Jitter Measurements in Presence of a Magnetic Chicane in the FERMI@elettra Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB014, pp. 109-111.
- H. Wiedemann et al., “The 3 GeV Synchrotron Injector for SPEAR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2688-2691.
- L. F. Bane, “Simulation of Longitudinal Phase Space in the SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1800-1803.
- J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “VELA (formerly EBTF) Simulations and First Beam Commissioning”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI065, pp. 431-433.
- R. Mu?â et al., “Single Bunch Bucket Selection Injection Modes in the ALBA Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2744-2746.
- Eva Bozoki, “Beam Transport to the SXLS Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2703-2706.
- P. Echevarria et al., “Multipurpose Controller Based on a FPGA with EPICS Integration”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOBN4, pp. 1407-1409.
- H. Kim, “Commissioning Experiences of the ALS Booster Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2691-2694.
- H. Ayvazian, “A New Design for an EMIS-CYCLOTRON System, for Direct Production of Gaseous PET Radioisotopes”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1750-1753.
- V. Grattoni and S. Casalbuoni, “Magnetic field errors and possible correction schemes in SCUs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM100, pp. 1211-1214.
Back to search